Topic: [ANN] ARGO - Masternodes | Skein | PoW | Microtransaction | ZeroCoin Protocol - page 32. (Read 43053 times)
February 06, 2018, 07:45:38 PM
Additional block explorer is available at http://argoexplorer.info/
February 06, 2018, 07:18:19 PM
Romanian, Japanese, German, Indian - PM Discord!
If you need Greek translation let me know
February 06, 2018, 06:53:11 PM
Romanian, Japanese, German, Indian - PM Discord!
Ur discord link r broken
German translation reserve pls
February 06, 2018, 03:10:49 PM
Please someone tell me when is Argo withdrawal issues are going to be resolved? Cryptobridge is the only exchange that sells it, and they’re saying it’s the devs fault their daemon can’t even handle 500 Argo transactions. it seems to me that if this thing don’t get resolved and people can’t get their Argo it’s going to be some serious dumping going on, I got 4BTC tied up in 20000 Argo to run 2 mns and I really believe in Argo so I would hate to start dumping but I WIll not risk losing my investment. Please get issue resolved ASAP
February 06, 2018, 02:03:56 PM
How much is Argo?
February 06, 2018, 11:48:58 AM
if i set the diff to 38 what will change?
try and tell us =) February 06, 2018, 10:44:24 AM
Romanian, Japanese, German, Indian - PM Discord!
February 06, 2018, 10:32:09 AM
if i set the diff to 38 what will change?
February 06, 2018, 10:07:57 AM
Was it possible to use AMD products for mining this? And what about hashrates?
I was going to use some R9 Nanos.
SGMiner or which to use for Skein?
I was going to use some R9 Nanos.
SGMiner or which to use for Skein?
Skein is a Nvidia algo. You have no chance to compete aggainst the 1080ti rigs.
You should go mine some ETHash or Cryptonight coins with AMD .. sad but true
February 06, 2018, 09:17:48 AM
Was it possible to use AMD products for mining this? And what about hashrates?
I was going to use some R9 Nanos.
SGMiner or which to use for Skein?
I was going to use some R9 Nanos.
SGMiner or which to use for Skein?
cgminer-skein, get 200Mh on R9 290
February 06, 2018, 08:36:08 AM
Was it possible to use AMD products for mining this? And what about hashrates?
I was going to use some R9 Nanos.
SGMiner or which to use for Skein?
I was going to use some R9 Nanos.
SGMiner or which to use for Skein?
February 06, 2018, 08:34:56 AM
Might do a benchmark run with 2 cards ( 1080 Ti, 1070 ) with all available miners for this coin so we can have a concrete answer regarding which software is the best to mine ARGO with.
February 06, 2018, 08:06:35 AM
I have 970mhs on palit super jetstream 1080ti 85pl +100mhz core
alexis78 miner
alexis78 miner
February 06, 2018, 06:09:39 AM
how to manuelly skein algo stratum diff 32 ?
Depend from pool, but most of the pools accept as a password -d=32:
For example:
Code:
ccminer -a skein -o stratum+tcp://pool.bsod.pw: -u -p c=ARGO,d=32
February 06, 2018, 05:59:53 AM
how to manuelly skein algo stratum diff 32 ?
February 06, 2018, 05:45:40 AM
Hello guys, i am seeing in the comments that a 180ti should get atleas 1000mh/s. Mine are getting around 820 mh/s.
How can i get to 1000MH/s ?
What are your GPU settings and miner? Try increasing the intensity manually. You can do so by adding -i How can i get to 1000MH/s ?
First try -i 21 then increase it by one and find the best intensity for your GPU. I have mine at -i 25 and get 950 mh/s
I started to mine with two 1080ti (1920MH/s) 0.446724 coins per hour
. I started to look around for other currencies to mine in the near future.What is your opinion on the price ... do you think it will rise. I am wondering if i should sell on 0.00021-22.
bat files ? i get - 950 mhs per card 6x 1080 ti evga - pool shares 3.2 why ? and low shares
February 05, 2018, 11:04:31 PM
starting to feel a bit frustrated with my 1080ti results.
So here's the setup:
ccminer alexis78_cuda9 on protopool
-p c=ARGO --cpu-priority=3 --max-temp=71 --intensity=18.05,18.35,18.05,18.35,18.05
gpu#0 Asus 1080ti turbo, 556MH/s
gpu#1 Evga 1080ti ftw3, 641MH/s
gpu#2 Asus 1080ti turbo, 552MH/s
gpu#3 Evga 1080ti ftw3, 631MH/s
gpu#4 Asus 1080ti turbo, 555MH/s
Afterburner:
cv 0%
pl 110%
tl 87c (actually set to 71c on ccminer)
cc +60
mc -320
If I up the intensity on the asus past 18.05, the rig shuts down. Same for evga, if I go past 18.35 it shuts down the rig. I tried similar settings using the ccminer_alexis_keccak and I get the same results. Starting to think this whole 1080ti 1GH/s mark is a unicorn, at the end of the day I end up with one coin per hour with all cards together running at mid 2900 MH/s with the pool fluctuating between 12 and 24 on the difficulty scale.
Any inputs?
Correction- used to get 1 ARGO an hour, for the past day more like .5 an hour :-/
lol)So here's the setup:
ccminer alexis78_cuda9 on protopool
-p c=ARGO --cpu-priority=3 --max-temp=71 --intensity=18.05,18.35,18.05,18.35,18.05
gpu#0 Asus 1080ti turbo, 556MH/s
gpu#1 Evga 1080ti ftw3, 641MH/s
gpu#2 Asus 1080ti turbo, 552MH/s
gpu#3 Evga 1080ti ftw3, 631MH/s
gpu#4 Asus 1080ti turbo, 555MH/s
Afterburner:
cv 0%
pl 110%
tl 87c (actually set to 71c on ccminer)
cc +60
mc -320
If I up the intensity on the asus past 18.05, the rig shuts down. Same for evga, if I go past 18.35 it shuts down the rig. I tried similar settings using the ccminer_alexis_keccak and I get the same results. Starting to think this whole 1080ti 1GH/s mark is a unicorn, at the end of the day I end up with one coin per hour with all cards together running at mid 2900 MH/s with the pool fluctuating between 12 and 24 on the difficulty scale.
Any inputs?
Correction- used to get 1 ARGO an hour, for the past day more like .5 an hour :-/
ccminer -a skein -o stratum+tcp://pool.bsod.pw:2134 -u wallet -i 28 -p x -R 5
pl85, cc+100, mc 0
5*inno3d 1080ti,
GPU#0:GeForce GTX 1080 Ti, 952.49MH/s
[2018-02-05 21:46:30] [S/A/T]: 0/260/260, diff: 986.974, 4754.66MH/s yes!
[2018-02-05 21:46:38] [S/A/T]: 0/261/261, diff: 12.752, 4754.83MH/s yes!
[2018-02-05 21:46:41] [S/A/T]: 0/262/262, diff: 26.515, 4754.84MH/s yes!
[2018-02-05 21:46:45] [S/A/T]: 0/263/263, diff: 10.118, 4755.53MH/s yes!
temp 64 degrees
geez I'm robbing myself! I looked around and found xevan palgin's exe on github, but when put together with the bat file it fails to start. Got a good source for the windows 10 miner?
how close to your power limit are you? like what kind of power source are you using? if you are using a 1300 watt psu, you will not have enough power to run 5 1080ti at stock clocks (about 250w each), especially if you are running your pc off the same power source. you would be lucky to run 5 1080ti on a 1300w psu even if it were a slave psu or running in a board like the b250 mining expert without undervolting or lowering the power limit on the cards to about 80-90%. at 110% power level you will be lucky to run them even on a 1600w power source. (275x6=1500watts)Just my guess to your problem.
Edit: I cant think of a psu that will run 5 1080ti because of the 8+6pin requirement. the evga 1600w psu only has 9 power cables, seasonic 1300w has 7 ( 8 ) , and ax1600i also has 9(10) unless you are running as a slave psu, then you wont need 1 wire for cpu, making 5 1080ti possible
Normally I never run higher that 100%, but given the shut downs I though it was power related and never dialed it back, I sure will now. Currently running them on a Tokamak 1500 pulling between 1150 to 1200 at the wall and 10 amps of usage. This has been one of the most power consuming algos I've done so far and mostly for not being able to recognize how it really worked.
Thanks for the heads up though.
February 05, 2018, 09:45:58 PM
i`m use for win 10 xevan,flight it`s very good, one 1080ti give 1000+ mhm PROTOPOOL wallet i28 and i`ts all not enough
Can you share download link for miner ? February 05, 2018, 08:50:23 PM
starting to feel a bit frustrated with my 1080ti results.
So here's the setup:
ccminer alexis78_cuda9 on protopool
-p c=ARGO --cpu-priority=3 --max-temp=71 --intensity=18.05,18.35,18.05,18.35,18.05
gpu#0 Asus 1080ti turbo, 556MH/s
gpu#1 Evga 1080ti ftw3, 641MH/s
gpu#2 Asus 1080ti turbo, 552MH/s
gpu#3 Evga 1080ti ftw3, 631MH/s
gpu#4 Asus 1080ti turbo, 555MH/s
Afterburner:
cv 0%
pl 110%
tl 87c (actually set to 71c on ccminer)
cc +60
mc -320
If I up the intensity on the asus past 18.05, the rig shuts down. Same for evga, if I go past 18.35 it shuts down the rig. I tried similar settings using the ccminer_alexis_keccak and I get the same results. Starting to think this whole 1080ti 1GH/s mark is a unicorn, at the end of the day I end up with one coin per hour with all cards together running at mid 2900 MH/s with the pool fluctuating between 12 and 24 on the difficulty scale.
Any inputs?
Correction- used to get 1 ARGO an hour, for the past day more like .5 an hour :-/
So here's the setup:
ccminer alexis78_cuda9 on protopool
-p c=ARGO --cpu-priority=3 --max-temp=71 --intensity=18.05,18.35,18.05,18.35,18.05
gpu#0 Asus 1080ti turbo, 556MH/s
gpu#1 Evga 1080ti ftw3, 641MH/s
gpu#2 Asus 1080ti turbo, 552MH/s
gpu#3 Evga 1080ti ftw3, 631MH/s
gpu#4 Asus 1080ti turbo, 555MH/s
Afterburner:
cv 0%
pl 110%
tl 87c (actually set to 71c on ccminer)
cc +60
mc -320
If I up the intensity on the asus past 18.05, the rig shuts down. Same for evga, if I go past 18.35 it shuts down the rig. I tried similar settings using the ccminer_alexis_keccak and I get the same results. Starting to think this whole 1080ti 1GH/s mark is a unicorn, at the end of the day I end up with one coin per hour with all cards together running at mid 2900 MH/s with the pool fluctuating between 12 and 24 on the difficulty scale.
Any inputs?
Correction- used to get 1 ARGO an hour, for the past day more like .5 an hour :-/
Check the bench section. Totally doable, and these are not the latest results either.
https://protopool.net/bench?algo=skein&chip=5
IMO your PL is way high. Start ~ 90% (or less).
February 05, 2018, 08:38:00 PM
starting to feel a bit frustrated with my 1080ti results.
So here's the setup:
ccminer alexis78_cuda9 on protopool
-p c=ARGO --cpu-priority=3 --max-temp=71 --intensity=18.05,18.35,18.05,18.35,18.05
gpu#0 Asus 1080ti turbo, 556MH/s
gpu#1 Evga 1080ti ftw3, 641MH/s
gpu#2 Asus 1080ti turbo, 552MH/s
gpu#3 Evga 1080ti ftw3, 631MH/s
gpu#4 Asus 1080ti turbo, 555MH/s
Afterburner:
cv 0%
pl 110%
tl 87c (actually set to 71c on ccminer)
cc +60
mc -320
If I up the intensity on the asus past 18.05, the rig shuts down. Same for evga, if I go past 18.35 it shuts down the rig. I tried similar settings using the ccminer_alexis_keccak and I get the same results. Starting to think this whole 1080ti 1GH/s mark is a unicorn, at the end of the day I end up with one coin per hour with all cards together running at mid 2900 MH/s with the pool fluctuating between 12 and 24 on the difficulty scale.
Any inputs?
Correction- used to get 1 ARGO an hour, for the past day more like .5 an hour :-/
lol)So here's the setup:
ccminer alexis78_cuda9 on protopool
-p c=ARGO --cpu-priority=3 --max-temp=71 --intensity=18.05,18.35,18.05,18.35,18.05
gpu#0 Asus 1080ti turbo, 556MH/s
gpu#1 Evga 1080ti ftw3, 641MH/s
gpu#2 Asus 1080ti turbo, 552MH/s
gpu#3 Evga 1080ti ftw3, 631MH/s
gpu#4 Asus 1080ti turbo, 555MH/s
Afterburner:
cv 0%
pl 110%
tl 87c (actually set to 71c on ccminer)
cc +60
mc -320
If I up the intensity on the asus past 18.05, the rig shuts down. Same for evga, if I go past 18.35 it shuts down the rig. I tried similar settings using the ccminer_alexis_keccak and I get the same results. Starting to think this whole 1080ti 1GH/s mark is a unicorn, at the end of the day I end up with one coin per hour with all cards together running at mid 2900 MH/s with the pool fluctuating between 12 and 24 on the difficulty scale.
Any inputs?
Correction- used to get 1 ARGO an hour, for the past day more like .5 an hour :-/
ccminer -a skein -o stratum+tcp://pool.bsod.pw:2134 -u wallet -i 28 -p x -R 5
pl85, cc+100, mc 0
5*inno3d 1080ti,
GPU#0:GeForce GTX 1080 Ti, 952.49MH/s
[2018-02-05 21:46:30] [S/A/T]: 0/260/260, diff: 986.974, 4754.66MH/s yes!
[2018-02-05 21:46:38] [S/A/T]: 0/261/261, diff: 12.752, 4754.83MH/s yes!
[2018-02-05 21:46:41] [S/A/T]: 0/262/262, diff: 26.515, 4754.84MH/s yes!
[2018-02-05 21:46:45] [S/A/T]: 0/263/263, diff: 10.118, 4755.53MH/s yes!
temp 64 degrees
geez I'm robbing myself! I looked around and found xevan palgin's exe on github, but when put together with the bat file it fails to start. Got a good source for the windows 10 miner?
how close to your power limit are you? like what kind of power source are you using? if you are using a 1300 watt psu, you will not have enough power to run 5 1080ti at stock clocks (about 250w each), especially if you are running your pc off the same power source. you would be lucky to run 5 1080ti on a 1300w psu even if it were a slave psu or running in a board like the b250 mining expert without undervolting or lowering the power limit on the cards to about 80-90%. at 110% power level you will be lucky to run them even on a 1600w power source. (275x6=1500watts)Just my guess to your problem.
Edit: I cant think of a psu that will run 5 1080ti because of the 8+6pin requirement. the evga 1600w psu only has 9 power cables, seasonic 1300w has 7 ( 8 ) , and ax1600i also has 9(10) unless you are running as a slave psu, then you wont need 1 wire for cpu, making 5 1080ti possible
Jump to: