Topic: [ANN] ARGO - Masternodes | Skein | PoW | Microtransaction | ZeroCoin Protocol - page 33. (Read 43065 times)
February 05, 2018, 08:04:15 PM
i`m use for win 10 xevan,flight it`s very good, one 1080ti give 1000+ mhm PROTOPOOL wallet i28 and i`ts all not enough
February 05, 2018, 06:52:02 PM
starting to feel a bit frustrated with my 1080ti results.
So here's the setup:
ccminer alexis78_cuda9 on protopool
-p c=ARGO --cpu-priority=3 --max-temp=71 --intensity=18.05,18.35,18.05,18.35,18.05
gpu#0 Asus 1080ti turbo, 556MH/s
gpu#1 Evga 1080ti ftw3, 641MH/s
gpu#2 Asus 1080ti turbo, 552MH/s
gpu#3 Evga 1080ti ftw3, 631MH/s
gpu#4 Asus 1080ti turbo, 555MH/s
Afterburner:
cv 0%
pl 110%
tl 87c (actually set to 71c on ccminer)
cc +60
mc -320
If I up the intensity on the asus past 18.05, the rig shuts down. Same for evga, if I go past 18.35 it shuts down the rig. I tried similar settings using the ccminer_alexis_keccak and I get the same results. Starting to think this whole 1080ti 1GH/s mark is a unicorn, at the end of the day I end up with one coin per hour with all cards together running at mid 2900 MH/s with the pool fluctuating between 12 and 24 on the difficulty scale.
Any inputs?
Correction- used to get 1 ARGO an hour, for the past day more like .5 an hour :-/
lol)So here's the setup:
ccminer alexis78_cuda9 on protopool
-p c=ARGO --cpu-priority=3 --max-temp=71 --intensity=18.05,18.35,18.05,18.35,18.05
gpu#0 Asus 1080ti turbo, 556MH/s
gpu#1 Evga 1080ti ftw3, 641MH/s
gpu#2 Asus 1080ti turbo, 552MH/s
gpu#3 Evga 1080ti ftw3, 631MH/s
gpu#4 Asus 1080ti turbo, 555MH/s
Afterburner:
cv 0%
pl 110%
tl 87c (actually set to 71c on ccminer)
cc +60
mc -320
If I up the intensity on the asus past 18.05, the rig shuts down. Same for evga, if I go past 18.35 it shuts down the rig. I tried similar settings using the ccminer_alexis_keccak and I get the same results. Starting to think this whole 1080ti 1GH/s mark is a unicorn, at the end of the day I end up with one coin per hour with all cards together running at mid 2900 MH/s with the pool fluctuating between 12 and 24 on the difficulty scale.
Any inputs?
Correction- used to get 1 ARGO an hour, for the past day more like .5 an hour :-/
ccminer -a skein -o stratum+tcp://pool.bsod.pw:2134 -u wallet -i 28 -p x -R 5
pl85, cc+100, mc 0
5*inno3d 1080ti,
GPU#0:GeForce GTX 1080 Ti, 952.49MH/s
[2018-02-05 21:46:30] [S/A/T]: 0/260/260, diff: 986.974, 4754.66MH/s yes!
[2018-02-05 21:46:38] [S/A/T]: 0/261/261, diff: 12.752, 4754.83MH/s yes!
[2018-02-05 21:46:41] [S/A/T]: 0/262/262, diff: 26.515, 4754.84MH/s yes!
[2018-02-05 21:46:45] [S/A/T]: 0/263/263, diff: 10.118, 4755.53MH/s yes!
temp 64 degrees
geez I'm robbing myself! I looked around and found xevan palgin's exe on github, but when put together with the bat file it fails to start. Got a good source for the windows 10 miner?
February 05, 2018, 02:51:00 PM
starting to feel a bit frustrated with my 1080ti results.
So here's the setup:
ccminer alexis78_cuda9 on protopool
-p c=ARGO --cpu-priority=3 --max-temp=71 --intensity=18.05,18.35,18.05,18.35,18.05
gpu#0 Asus 1080ti turbo, 556MH/s
gpu#1 Evga 1080ti ftw3, 641MH/s
gpu#2 Asus 1080ti turbo, 552MH/s
gpu#3 Evga 1080ti ftw3, 631MH/s
gpu#4 Asus 1080ti turbo, 555MH/s
Afterburner:
cv 0%
pl 110%
tl 87c (actually set to 71c on ccminer)
cc +60
mc -320
If I up the intensity on the asus past 18.05, the rig shuts down. Same for evga, if I go past 18.35 it shuts down the rig. I tried similar settings using the ccminer_alexis_keccak and I get the same results. Starting to think this whole 1080ti 1GH/s mark is a unicorn, at the end of the day I end up with one coin per hour with all cards together running at mid 2900 MH/s with the pool fluctuating between 12 and 24 on the difficulty scale.
Any inputs?
Correction- used to get 1 ARGO an hour, for the past day more like .5 an hour :-/
lol)So here's the setup:
ccminer alexis78_cuda9 on protopool
-p c=ARGO --cpu-priority=3 --max-temp=71 --intensity=18.05,18.35,18.05,18.35,18.05
gpu#0 Asus 1080ti turbo, 556MH/s
gpu#1 Evga 1080ti ftw3, 641MH/s
gpu#2 Asus 1080ti turbo, 552MH/s
gpu#3 Evga 1080ti ftw3, 631MH/s
gpu#4 Asus 1080ti turbo, 555MH/s
Afterburner:
cv 0%
pl 110%
tl 87c (actually set to 71c on ccminer)
cc +60
mc -320
If I up the intensity on the asus past 18.05, the rig shuts down. Same for evga, if I go past 18.35 it shuts down the rig. I tried similar settings using the ccminer_alexis_keccak and I get the same results. Starting to think this whole 1080ti 1GH/s mark is a unicorn, at the end of the day I end up with one coin per hour with all cards together running at mid 2900 MH/s with the pool fluctuating between 12 and 24 on the difficulty scale.
Any inputs?
Correction- used to get 1 ARGO an hour, for the past day more like .5 an hour :-/
ccminer -a skein -o stratum+tcp://pool.bsod.pw:2134 -u wallet -i 28 -p x -R 5
pl85, cc+100, mc 0
5*inno3d 1080ti,
GPU#0:GeForce GTX 1080 Ti, 952.49MH/s
[2018-02-05 21:46:30] [S/A/T]: 0/260/260, diff: 986.974, 4754.66MH/s yes!
[2018-02-05 21:46:38] [S/A/T]: 0/261/261, diff: 12.752, 4754.83MH/s yes!
[2018-02-05 21:46:41] [S/A/T]: 0/262/262, diff: 26.515, 4754.84MH/s yes!
[2018-02-05 21:46:45] [S/A/T]: 0/263/263, diff: 10.118, 4755.53MH/s yes!
temp 64 degrees
February 05, 2018, 02:44:45 PM
I have miner ccminer/krnlx-xevan
6x1070. 500-540 MH/s
cc +50
mc -300
[2018-02-05 22:40:14] GPU#2:GeForce GTX 1070, 537.17MH/s
[2018-02-05 22:40:14] GPU#2:GeForce GTX 1070, 3.2MH/W, 0.26MH/Mhz
[2018-02-05 22:40:14] GPU#2:GeForce GTX 1070, 64C(F:64%) 2035/3748MHz(169W)
[2018-02-05 22:40:14] GPU#4:GeForce GTX 1070, 535.01MH/s
[2018-02-05 22:40:14] GPU#4:GeForce GTX 1070, 3.2MH/W, 0.26MH/Mhz
[2018-02-05 22:40:14] GPU#4:GeForce GTX 1070, 63C(F:60%) 2026/3748MHz(168W)
[2018-02-05 22:40:15] GPU#3:GeForce GTX 1070, 540.84MH/s
[2018-02-05 22:40:16] GPU#3:GeForce GTX 1070, 3.2MH/W, 0.26MH/Mhz
[2018-02-05 22:40:16] GPU#3:GeForce GTX 1070, 66C(F:67%) 2050/3748MHz(169W)
[2018-02-05 22:40:17] GPU#1:GeForce GTX 1070, 499.10MH/s
[2018-02-05 22:40:17] GPU#1:GeForce GTX 1070, 3.3MH/W, 0.26MH/Mhz
[2018-02-05 22:40:17] GPU#1:GeForce GTX 1070, 57C(F:49%) 1903/3499MHz(150W)
[2018-02-05 22:40:24] GPU#5:GeForce GTX 1070, 544.01MH/s
[2018-02-05 22:40:24] GPU#5:GeForce GTX 1070, 3.2MH/W, 0.26MH/Mhz
[2018-02-05 22:40:24] GPU#5:GeForce GTX 1070, 61C(F:57%) 2058/3748MHz(169W)
[2018-02-05 22:40:24] GPU#0:GeForce GTX 1070, 539.24MH/s
[2018-02-05 22:40:24] GPU#0:GeForce GTX 1070, 3.2MH/W, 0.26MH/Mhz
[2018-02-05 22:40:24] GPU#0:GeForce GTX 1070, 63C(F:63%) 2050/3748MHz(167W)
6x1070. 500-540 MH/s
cc +50
mc -300
[2018-02-05 22:40:14] GPU#2:GeForce GTX 1070, 537.17MH/s
[2018-02-05 22:40:14] GPU#2:GeForce GTX 1070, 3.2MH/W, 0.26MH/Mhz
[2018-02-05 22:40:14] GPU#2:GeForce GTX 1070, 64C(F:64%) 2035/3748MHz(169W)
[2018-02-05 22:40:14] GPU#4:GeForce GTX 1070, 535.01MH/s
[2018-02-05 22:40:14] GPU#4:GeForce GTX 1070, 3.2MH/W, 0.26MH/Mhz
[2018-02-05 22:40:14] GPU#4:GeForce GTX 1070, 63C(F:60%) 2026/3748MHz(168W)
[2018-02-05 22:40:15] GPU#3:GeForce GTX 1070, 540.84MH/s
[2018-02-05 22:40:16] GPU#3:GeForce GTX 1070, 3.2MH/W, 0.26MH/Mhz
[2018-02-05 22:40:16] GPU#3:GeForce GTX 1070, 66C(F:67%) 2050/3748MHz(169W)
[2018-02-05 22:40:17] GPU#1:GeForce GTX 1070, 499.10MH/s
[2018-02-05 22:40:17] GPU#1:GeForce GTX 1070, 3.3MH/W, 0.26MH/Mhz
[2018-02-05 22:40:17] GPU#1:GeForce GTX 1070, 57C(F:49%) 1903/3499MHz(150W)
[2018-02-05 22:40:24] GPU#5:GeForce GTX 1070, 544.01MH/s
[2018-02-05 22:40:24] GPU#5:GeForce GTX 1070, 3.2MH/W, 0.26MH/Mhz
[2018-02-05 22:40:24] GPU#5:GeForce GTX 1070, 61C(F:57%) 2058/3748MHz(169W)
[2018-02-05 22:40:24] GPU#0:GeForce GTX 1070, 539.24MH/s
[2018-02-05 22:40:24] GPU#0:GeForce GTX 1070, 3.2MH/W, 0.26MH/Mhz
[2018-02-05 22:40:24] GPU#0:GeForce GTX 1070, 63C(F:63%) 2050/3748MHz(167W)
February 05, 2018, 02:27:51 PM
lol, -i 28, miner ccminer/krnlx-xevan, diff 36
February 05, 2018, 02:11:27 PM
starting to feel a bit frustrated with my 1080ti results.
So here's the setup:
ccminer alexis78_cuda9 on protopool
-p c=ARGO --cpu-priority=3 --max-temp=71 --intensity=18.05,18.35,18.05,18.35,18.05
gpu#0 Asus 1080ti turbo, 556MH/s
gpu#1 Evga 1080ti ftw3, 641MH/s
gpu#2 Asus 1080ti turbo, 552MH/s
gpu#3 Evga 1080ti ftw3, 631MH/s
gpu#4 Asus 1080ti turbo, 555MH/s
Afterburner:
cv 0%
pl 110%
tl 87c (actually set to 71c on ccminer)
cc +60
mc -320
If I up the intensity on the asus past 18.05, the rig shuts down. Same for evga, if I go past 18.35 it shuts down the rig. I tried similar settings using the ccminer_alexis_keccak and I get the same results. Starting to think this whole 1080ti 1GH/s mark is a unicorn, at the end of the day I end up with one coin per hour with all cards together running at mid 2900 MH/s with the pool fluctuating between 12 and 24 on the difficulty scale.
Any inputs?
Correction- used to get 1 ARGO an hour, for the past day more like .5 an hour :-/
So here's the setup:
ccminer alexis78_cuda9 on protopool
-p c=ARGO --cpu-priority=3 --max-temp=71 --intensity=18.05,18.35,18.05,18.35,18.05
gpu#0 Asus 1080ti turbo, 556MH/s
gpu#1 Evga 1080ti ftw3, 641MH/s
gpu#2 Asus 1080ti turbo, 552MH/s
gpu#3 Evga 1080ti ftw3, 631MH/s
gpu#4 Asus 1080ti turbo, 555MH/s
Afterburner:
cv 0%
pl 110%
tl 87c (actually set to 71c on ccminer)
cc +60
mc -320
If I up the intensity on the asus past 18.05, the rig shuts down. Same for evga, if I go past 18.35 it shuts down the rig. I tried similar settings using the ccminer_alexis_keccak and I get the same results. Starting to think this whole 1080ti 1GH/s mark is a unicorn, at the end of the day I end up with one coin per hour with all cards together running at mid 2900 MH/s with the pool fluctuating between 12 and 24 on the difficulty scale.
Any inputs?
Correction- used to get 1 ARGO an hour, for the past day more like .5 an hour :-/
February 05, 2018, 02:08:38 PM
It was a problem with the miner. Now i get 960-970MH/s per card. I downloaded this miner - http://cryptomining-blog.com/wp-content/download/ccminer_alexis_keccak.zip .
I started to mine with two 1080ti (1920MH/s) 0.446724 coins per hour
. I started to look around for other currencies to mine in the near future.
What is your opinion on the price ... do you think it will rise. I am wondering if i should sell on 0.00021-22.
Nice glad you made it to work. Yeah Alexis78 miner works fine with skein. Not sure about the price, I'm more worried about BTC. It's tanking hard right now. Could dip even further. But right now ARGO is one of the best to mine, everything else down I started to mine with two 1080ti (1920MH/s) 0.446724 coins per hour
. I started to look around for other currencies to mine in the near future.What is your opinion on the price ... do you think it will rise. I am wondering if i should sell on 0.00021-22.
February 05, 2018, 01:58:08 PM
Hello guys, i am seeing in the comments that a 180ti should get atleas 1000mh/s. Mine are getting around 820 mh/s.
How can i get to 1000MH/s ?
What are your GPU settings and miner? Try increasing the intensity manually. You can do so by adding -i How can i get to 1000MH/s ?
First try -i 21 then increase it by one and find the best intensity for your GPU. I have mine at -i 25 and get 950 mh/s
I started to mine with two 1080ti (1920MH/s) 0.446724 coins per hour
. I started to look around for other currencies to mine in the near future.What is your opinion on the price ... do you think it will rise. I am wondering if i should sell on 0.00021-22.
thanks for share miner
February 05, 2018, 12:24:56 PM
Hello guys, i am seeing in the comments that a 180ti should get atleas 1000mh/s. Mine are getting around 820 mh/s.
How can i get to 1000MH/s ?
What are your GPU settings and miner? Try increasing the intensity manually. You can do so by adding -i How can i get to 1000MH/s ?
First try -i 21 then increase it by one and find the best intensity for your GPU. I have mine at -i 25 and get 950 mh/s
I started to mine with two 1080ti (1920MH/s) 0.446724 coins per hour
. I started to look around for other currencies to mine in the near future.What is your opinion on the price ... do you think it will rise. I am wondering if i should sell on 0.00021-22.
February 05, 2018, 12:21:30 PM
Hello guys, i am seeing in the comments that a 180ti should get atleas 1000mh/s. Mine are getting around 820 mh/s.
How can i get to 1000MH/s ?
What are your GPU settings and miner? Try increasing the intensity manually. You can do so by adding -i How can i get to 1000MH/s ?
First try -i 21 then increase it by one and find the best intensity for your GPU. I have mine at -i 25 and get 950 mh/s
February 05, 2018, 12:00:06 PM
1. BSOD.PW
Code:
-a skein -o stratum+tcp://pool.bsod.pw:2134 -u YOURWALLETADDRESS.rigname -p x -R 5
2. PROTOPOOL.NET
Code:
-a skein -o stratum+tcp://eu1.protopool.net:4933 -u WALLET_ADDRESS -p c=ARGO
3. pool.coin-miners.info
Code:
-o stratum+tcp://stratum-eu.coin-miners.info:4933 -u ARGO_WALLET_ADDRESS -p c=ARGO
4. pool.cryptoally.net
Code:
-o stratum+tcp://eu1.cryptoally.net:4933 -u -p c=ARGO
5. arcpool.com
Code:
-o stratum+tcp://arcpool.com:31101 -u -p c=ARGO
6. madpool.xyz
Code:
ccminer -a skein -o stratum+tcp://madpool.xyz:4933 -u -p c=ARGO
7. HASHFASTER.COM
Code:
-a skein -o stratum+tcp://hashfaster.com:20004 -u -p c=ARGO
February 05, 2018, 11:35:41 AM
Hey guys!
I have 3600 MH/S, and mine 1 coin/hour. But now, I only mine 0,2-0,4 / hour.. The difficulty go to the moon? Or any ideas to fix it?
I have 3600 MH/S, and mine 1 coin/hour. But now, I only mine 0,2-0,4 / hour.. The difficulty go to the moon? Or any ideas to fix it?
I noticed the same .. Made 20 coins/day but now only ~ 6 coins .. whats going on?
Maybe, you should choose a right pool , buddy
It'll make you with high percentage .
The pool can find block quickly that you will get more and fast
Can you please send me a good pool?
February 05, 2018, 10:51:10 AM
Hey guys!
I have 3600 MH/S, and mine 1 coin/hour. But now, I only mine 0,2-0,4 / hour.. The difficulty go to the moon? Or any ideas to fix it?
I have 3600 MH/S, and mine 1 coin/hour. But now, I only mine 0,2-0,4 / hour.. The difficulty go to the moon? Or any ideas to fix it?
I noticed the same .. Made 20 coins/day but now only ~ 6 coins .. whats going on?
Maybe, you should choose a right pool , buddy
It'll make you with high percentage .
The pool can find block quickly that you will get more and fast
February 05, 2018, 10:33:18 AM
anybody who wants a Cold Wallet Guide for Ubuntu 16.04 VPS with Windows Qt Wallet, Send me a pm
February 05, 2018, 10:32:11 AM
Hi Miners!
🚀 Hash Faster ARGO with HashFaster.com's Pool 🚀
Ticker: ARGO
Special Sauce:
Support and community Discord: https://discord.gg/3wmv7RB
Ticker: ARGO
Special Sauce:
Code:
-a skein -o stratum+tcp://hashfaster.com:20004 -u WALLET_ADDRESS -p c=ARGO
Site: https://hashfaster.com Support and community Discord: https://discord.gg/3wmv7RB
February 05, 2018, 10:20:44 AM
Hello guys, i am seeing in the comments that a 180ti should get atleas 1000mh/s. Mine are getting around 820 mh/s.
How can i get to 1000MH/s ?
How can i get to 1000MH/s ?
Try with alexis78 ccminer
As a detour to your point about a trojan - many AV products flag miners and even sometimes wallets as malware or unwanted software. Unfortunately we're operating in an environment where unless you're willing to download the source, do a full code review including knowing how to spot security vulnerabilities, you'll have to trust the tools. Miners are a control channel to your PC, to perform what is hopefully a known/limited set of operations (mining for coins). The reality is these tools can and have been compromised, I'd stick with the known good ones and not worry about a few mhs.
February 05, 2018, 10:18:32 AM
Hey guys!
I have 3600 MH/S, and mine 1 coin/hour. But now, I only mine 0,2-0,4 / hour.. The difficulty go to the moon? Or any ideas to fix it?
I have 3600 MH/S, and mine 1 coin/hour. But now, I only mine 0,2-0,4 / hour.. The difficulty go to the moon? Or any ideas to fix it?
Welcome to the world of crypto mining. As you maybe ever heard of, this is the result of increasing difficulty due the amount of miners.
February 05, 2018, 09:26:10 AM
Hello guys, i am seeing in the comments that a 180ti should get atleas 1000mh/s. Mine are getting around 820 mh/s.
How can i get to 1000MH/s ?
How can i get to 1000MH/s ?
Try with alexis78 ccminer
February 05, 2018, 08:50:50 AM
Hello guys, i am seeing in the comments that a 180ti should get atleas 1000mh/s. Mine are getting around 820 mh/s.
How can i get to 1000MH/s ?
How can i get to 1000MH/s ?
Try with alexis78 ccminer
February 05, 2018, 08:43:50 AM
Hello guys, i am seeing in the comments that a 180ti should get atleas 1000mh/s. Mine are getting around 820 mh/s.
How can i get to 1000MH/s ?
How can i get to 1000MH/s ?
Jump to: