ANN: BITMAIN has Tested Its 28nm Bitcoin Mining Chip BM1382 - page 9.

avtogen

newbie

Activity: 51

Merit: 0

Quote from: J4bberwock on July 23, 2014, 09:12:40 AM

Quote from: AgoraLive on July 23, 2014, 02:58:59 AM

Quote from: oskuro on July 18, 2014, 02:16:13 PM

Quote

How do these machines have any chance to ROI in Europe with the electricity prices and import taxes!?!?

??

I pay 0.12 €/kwh and you ?

0,28 €/kwh in Denmark..... Angry

0.10 including all the taxes in France, but a few days in winter are over 0.50€
Or you can pay 0.14 all year long, but it was less profitable for me than to turn everything off a few days.

I pay 0,04 €/kwh,

but you have to live in Russia for that Sad

ibminer

legendary

Activity: 1789

Merit: 2535

Goonies never say die.

Quote from: vulgartrendkill on July 23, 2014, 01:38:00 AM

Quote from: sjc1490 on July 22, 2014, 07:59:26 PM

Quote from: jamesc760 on July 22, 2014, 07:01:54 PM

If your S3 is not performing at 440 GHs, may be worth a shot to re-flash it.

Download the firmware here:

https://bitmaintech.com/files/download/antMiner_S320140711.bin

This was from the S3 thread and not sure why I didn't think of this instead of playing around with the freq's - but it worked. Got my unit I had to set at 212 freq to get 420 up to the 440's at the 218. Anyone with under performing units might try.

I reflashed both of my units, and so far, I cant really see a change. With underclock at 212.50 I was getting 420-430 gh/s and I put them back up to 218.75 and am getting 442 gh on each.

If you used the link above, you were pointed to the original firmware file...... not the new one.

EDIT: um... what happened to the new firmware file?

J4bberwock

hero member

Activity: 840

Merit: 1000

Quote from: AgoraLive on July 23, 2014, 02:58:59 AM

Quote from: oskuro on July 18, 2014, 02:16:13 PM

Quote

How do these machines have any chance to ROI in Europe with the electricity prices and import taxes!?!?

??

I pay 0.12 €/kwh and you ?

0,28 €/kwh in Denmark..... Angry

0.10 including all the taxes in France, but a few days in winter are over 0.50€
Or you can pay 0.14 all year long, but it was less profitable for me than to turn everything off a few days.

AgoraLive

full member

Activity: 221

Merit: 100

Quote from: oskuro on July 18, 2014, 02:16:13 PM

Quote

How do these machines have any chance to ROI in Europe with the electricity prices and import taxes!?!?

??

I pay 0.12 €/kwh and you ?

0,28 €/kwh in Denmark..... Angry

oskuro

sr. member

Activity: 294

Merit: 251

Quote from: vulgartrendkill on July 23, 2014, 01:38:00 AM

Quote from: sjc1490 on July 22, 2014, 07:59:26 PM

Quote from: jamesc760 on July 22, 2014, 07:01:54 PM

If your S3 is not performing at 440 GHs, may be worth a shot to re-flash it.

Download the firmware here:

https://bitmaintech.com/files/download/antMiner_S320140711.bin

This was from the S3 thread and not sure why I didn't think of this instead of playing around with the freq's - but it worked. Got my unit I had to set at 212 freq to get 420 up to the 440's at the 218. Anyone with under performing units might try.

I reflashed both of my units, and so far, I cant really see a change. With underclock at 212.50 I was getting 420-430 gh/s and I put them back up to 218.75 and am getting 442 gh on each.

Great improvement Wink

vulgartrendkill

hero member

Activity: 518

Merit: 500

Quote from: sjc1490 on July 22, 2014, 07:59:26 PM

Quote from: jamesc760 on July 22, 2014, 07:01:54 PM

If your S3 is not performing at 440 GHs, may be worth a shot to re-flash it.

Download the firmware here:

https://bitmaintech.com/files/download/antMiner_S320140711.bin

This was from the S3 thread and not sure why I didn't think of this instead of playing around with the freq's - but it worked. Got my unit I had to set at 212 freq to get 420 up to the 440's at the 218. Anyone with under performing units might try.

I reflashed both of my units, and so far, I cant really see a change. With underclock at 212.50 I was getting 420-430 gh/s and I put them back up to 218.75 and am getting 442 gh on each.

sjc1490

hero member

Activity: 546

Merit: 500

Quote from: jamesc760 on July 22, 2014, 07:01:54 PM

If your S3 is not performing at 440 GHs, may be worth a shot to re-flash it.

Download the firmware here:

https://bitmaintech.com/files/download/antMiner_S320140711.bin

This was from the S3 thread and not sure why I didn't think of this instead of playing around with the freq's - but it worked. Got my unit I had to set at 212 freq to get 420 up to the 440's at the 218. Anyone with under performing units might try.

tzortz

hero member

Activity: 728

Merit: 500

Thanks so much guys.

Biodom

legendary

Activity: 3892

Merit: 4331

Quote from: tzortz on July 22, 2014, 05:15:11 PM

I mean if there is some place where I should look at for how to do it.

Edit: ^^^^^ see that post for a thread.
On PC use putty, on a Mac-Terminal.
General instruction:
http://www.youtube.com/watch?v=72FU4Z_n0B4
click on more to see more text- it is all right there

you have to remove # next to what you want to be active and add # next to what is currently active (218.75)
just be careful with typing-I always mess up the lane

jonnybravo0311

legendary

Activity: 1344

Merit: 1024

Mine at Jonny's Pool

Quote from: tzortz on July 22, 2014, 05:15:11 PM

I mean if there is some place where I should look at for how to do it.

There's an over clocking thread here: https://bitcointalksearch.org/topic/bitmain-antminer-s3-support-and-overclocking-thread-699064

As has been stated here, there and pretty much everywhere, it's a toss up whether or not you'll be able to over clock the S3. Some people have been very lucky and gotten them to run quite stable at 504GH/s. Others like me are lucky to see 441GH/s and are more likely to see 415-420GH/s.

tzortz

hero member

Activity: 728

Merit: 500

I mean if there is some place where I should look at for how to do it.

Biodom

legendary

Activity: 3892

Merit: 4331

Quote from: tzortz on July 22, 2014, 05:07:58 PM

Any link for overclocking , anyone?

people posted screens of performance. Do you mean how to or a specific thread?

tzortz

hero member

Activity: 728

Merit: 500

Any link for overclocking , anyone?

toxic1978

newbie

Activity: 49

Merit: 0

Quote from: HerbPean on July 22, 2014, 09:39:36 AM

Quote from: nickgaff on July 22, 2014, 02:04:13 AM

Quote from: klondike_bar on July 21, 2014, 08:59:09 PM

Quote from: nickgaff on July 21, 2014, 08:33:59 PM

Release B4 Grin

they are likely using the last few days to ensure happy B1-B3 customers. By the end of the week almost every order should be shipped and they can offer 48-hr shipping on B4 onwards.

also, they probably need a few days to redesign the miner to achieve 500GH if its possible.

500GH Would be devine. Hopefully BITMAIN can do it.

They told me they won't redesign it (I asked more info the DC/DC component).

I got one unit that run at 250 mhz at ~503 GH/s (0.001% error rate)
The other one, running at stock at ~434 gh/s (Any OC kill the performance)

Same, I have 6 units and 4 run at between 485 - 503 GH/s the other 2 run at 420 - 440 GH/s . Attempting to overclock just knocks one or two of the asic's out until switch off.

Mudbankkeith

hero member

Activity: 868

Merit: 1000

Quote from: suchmoon on July 22, 2014, 04:49:45 PM

Quote from: hurricandave on July 22, 2014, 12:22:09 PM

My favorite item I see in this picture is the SMOKE DETECTOR !!!!!!!!!

Pfffttt... real miners don't use smoke detectors or any of that fancy UPS thingy. Or shelves. You'd never ROI with all that Grin

No tin hats, safety boots, overalls or glasses
In fact no PPE whatsoever, This is seat of the pants and cloth caps mining at its very basic level. Roll Eyes

suchmoon

legendary

Activity: 3654

Merit: 8909

https://bpip.org

Quote from: hurricandave on July 22, 2014, 12:22:09 PM

My favorite item I see in this picture is the SMOKE DETECTOR !!!!!!!!!

Pfffttt... real miners don't use smoke detectors or any of that fancy UPS thingy. Or shelves. You'd never ROI with all that Grin

hurricandave

legendary

Activity: 966

Merit: 1003

Quote from: tuaris on July 22, 2014, 11:55:33 AM

My 2 S3's arrived this morning. They are now up and running at a steady 458 GH/s. Interestingly they use about 30 watts less power than the S1's.

My favorite item I see in this picture is the SMOKE DETECTOR !!!!!!!!!

oskuro

sr. member

Activity: 294

Merit: 251

Quote from: tuaris on July 22, 2014, 12:14:03 PM

Quote from: oskuro on July 22, 2014, 12:05:38 PM

Quote from: tuaris on July 22, 2014, 11:55:33 AM

My 2 S3's arrived this morning. They are now up and running at a steady 458 GH/s. Interestingly they use about 30 watts less power than the S1's.

458 GH/s what frequency and how many Watts each S3?

218.75
I've got both S3 on the one UPS that shows 738 watts, so I figure about 369 watts for each. Both have the same type of PSU too.

218.75 ok

I will have to test when my S3 arrive, but im scared of changing frequency to 250 to try to OC to 504GH/s.... i dont want S3 to explode Grin

At 250 frequency --> 504GH/s lucker S3´s , how much Watts there?

oskuro

sr. member

Activity: 294

Merit: 251

Quote from: jonnybravo0311 on July 22, 2014, 12:10:22 PM

It's amazing how much variance there is in the first few batches. People have reported being able to hit and hold 504GH/s stable at a clock of 250, while others (like myself) can do no over clocking at all, and cannot hit even the reduced advertised stock speeds on all units. For example, one of my S3s hashes very happily at 441GH/s @ 218.75. The other one can barely hold 420GH/s at the same clock speed. I've tried over clocking, under clocking both of them, but neither works. Any change to a higher clock frequency inevitably leads to "x" and "-" and lower-than-stock hash rates. I've pulled both of my units apart, cleaned and replaced all thermal paste with AS. Unfortunately, I'm just one of the unlucky ones.

But its not dangerous to OC to 250? And how do i know if my S3 batch 2 can OC to 504 GH/s with luck without any problem, change frequency and wait for what, 2-3 hours and watch temperature and hardware failures?

tuaris

hero member

Activity: 780

Merit: 501

Quote from: oskuro on July 22, 2014, 12:05:38 PM

Quote from: tuaris on July 22, 2014, 11:55:33 AM

My 2 S3's arrived this morning. They are now up and running at a steady 458 GH/s. Interestingly they use about 30 watts less power than the S1's.

458 GH/s what frequency and how many Watts each S3?

218.75
I've got both S3 on the one UPS that shows 738 watts, so I figure about 369 watts for each. Both have the same type of PSU too.

Topic: ANN: BITMAIN has Tested Its 28nm Bitcoin Mining Chip BM1382 - page 9. (Read 144001 times)