@vicvelcro
Try running repairwallet with the new CapitalCoin-qt from 09/16/2004.
Make certain you are in sync with the block explorer first.
Topic: [ANN] CapitalCoin | CPTL | 0% PreMine | First Moores Law PoW/PoS | ON - EXCHANGE - page 2. (Read 23724 times)
September 16, 2014, 09:40:06 PM
September 16, 2014, 01:16:26 PM
[edit to add info]
After using the debug console "help" and reading through it, I started poking things. I backed up my wallet.dat first. So, after trying all kinds of things that I won't specify - because they didn't help... I will say that in the debug console, I typed "checkwallet" and waited a while to see what the result would be. It came back with "mismatched spent". I typed "repairwallet" and let it do whatever things it does. When it finished, my coins were listed as "Staked" on the Overview. I presume that after they have staked long enough, they will become my normal balance again. If not, I'll post back here.
Just in case this might help somebody else, I include it here.
[original post]
On Sept 13, I updated to 1.4.2 and started the wallet. My 640,000 coins went from "Balance" to "Stake", 2755.91534 coins showed up as PoS mined. It is now Sept 16, those PoS mined coins are still showing 0 confirmations and all of my coins that were "Staked" have vanished, my "Balance" is still 0, My unconfirmed coins are still 0. Net total coins in my wallet anywhere is 0.
I restarted the wallet with -rescan option but that did not change anything.
A little help?
After using the debug console "help" and reading through it, I started poking things. I backed up my wallet.dat first. So, after trying all kinds of things that I won't specify - because they didn't help... I will say that in the debug console, I typed "checkwallet" and waited a while to see what the result would be. It came back with "mismatched spent". I typed "repairwallet" and let it do whatever things it does. When it finished, my coins were listed as "Staked" on the Overview. I presume that after they have staked long enough, they will become my normal balance again. If not, I'll post back here.
Just in case this might help somebody else, I include it here.
[original post]
On Sept 13, I updated to 1.4.2 and started the wallet. My 640,000 coins went from "Balance" to "Stake", 2755.91534 coins showed up as PoS mined. It is now Sept 16, those PoS mined coins are still showing 0 confirmations and all of my coins that were "Staked" have vanished, my "Balance" is still 0, My unconfirmed coins are still 0. Net total coins in my wallet anywhere is 0.
I restarted the wallet with -rescan option but that did not change anything.
A little help?
Just as a sanity check, is your wallet in sync with the block explorer?
Can you check the balance of your address on the block explorer, just to confirm that the issue is with your wallet.
Also I'm testing an update to repair wallet, once done I will release an update.
September 16, 2014, 12:00:16 AM
[edit to add info]
After using the debug console "help" and reading through it, I started poking things. I backed up my wallet.dat first. So, after trying all kinds of things that I won't specify - because they didn't help... I will say that in the debug console, I typed "checkwallet" and waited a while to see what the result would be. It came back with "mismatched spent". I typed "repairwallet" and let it do whatever things it does. When it finished, my coins were listed as "Staked" on the Overview. I presume that after they have staked long enough, they will become my normal balance again. If not, I'll post back here.
Just in case this might help somebody else, I include it here.
[original post]
On Sept 13, I updated to 1.4.2 and started the wallet. My 640,000 coins went from "Balance" to "Stake", 2755.91534 coins showed up as PoS mined. It is now Sept 16, those PoS mined coins are still showing 0 confirmations and all of my coins that were "Staked" have vanished, my "Balance" is still 0, My unconfirmed coins are still 0. Net total coins in my wallet anywhere is 0.
I restarted the wallet with -rescan option but that did not change anything.
A little help?
After using the debug console "help" and reading through it, I started poking things. I backed up my wallet.dat first. So, after trying all kinds of things that I won't specify - because they didn't help... I will say that in the debug console, I typed "checkwallet" and waited a while to see what the result would be. It came back with "mismatched spent". I typed "repairwallet" and let it do whatever things it does. When it finished, my coins were listed as "Staked" on the Overview. I presume that after they have staked long enough, they will become my normal balance again. If not, I'll post back here.
Just in case this might help somebody else, I include it here.
[original post]
On Sept 13, I updated to 1.4.2 and started the wallet. My 640,000 coins went from "Balance" to "Stake", 2755.91534 coins showed up as PoS mined. It is now Sept 16, those PoS mined coins are still showing 0 confirmations and all of my coins that were "Staked" have vanished, my "Balance" is still 0, My unconfirmed coins are still 0. Net total coins in my wallet anywhere is 0.
I restarted the wallet with -rescan option but that did not change anything.
A little help?
September 12, 2014, 11:05:56 PM
Please upgrade your clients or your Coins will be worthless ones the money supply gets to 130 Million CPTL. You need to have client Version v1.4.2.0 or Higher
{
"addr" : "188.165.194.96:22033",
"services" : "00000001",
"lastsend" : 1410579917,
"lastrecv" : 1410579920,
"conntime" : 1410568421,
"version" : 70001,
"subver" : "/CapitalCoin:1.3.1/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 398445,
"banscore" : 0
},
{
"addr" : "67.231.54.2:60766",
"services" : "00000001",
"lastsend" : 1410580421,
"lastrecv" : 1410580159,
"conntime" : 1410561357,
"version" : 70001,
"subver" : "/Satoshi:1.0.0/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 311122,
"banscore" : 0
},
{
"addr" : "101.230.0.99:57358",
"services" : "00000001",
"lastsend" : 1412031590,
"lastrecv" : 1412031591,
"conntime" : 1411979962,
"version" : 70001,
"subver" : "/Satoshi:1.0.0/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 209956,
"banscore" : 0
},
{
"addr" : "97.97.233.101:52539",
"services" : "00000001",
"lastsend" : 1410579934,
"lastrecv" : 1410579921,
"conntime" : 1410577600,
"version" : 70001,
"subver" : "/CapitalCoin:1.3.1.1/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 398763,
"banscore" : 0
}
September 05, 2014, 09:17:39 AM
can't mine as it gives communication error everytime while submitting block 
are you connected to more than one node?
It should not matter until 130Mil, but all this nodes have the latets version, try connecting to them.
Code:
addnode=31.220.51.2
addnode=50.197.11.193
addnode=69.123.144.189
addnode=80.220.134.196
addnode=105.227.83.136
addnode=188.134.72.213
addnode=194.68.37.100
addnode=213.87.141.23
addnode=50.197.11.193
addnode=69.123.144.189
addnode=80.220.134.196
addnode=105.227.83.136
addnode=188.134.72.213
addnode=194.68.37.100
addnode=213.87.141.23
September 05, 2014, 04:19:48 AM
can't mine as it gives communication error everytime while submitting block
September 04, 2014, 05:26:02 PM
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Update 09/03/2014
Mandatory Upgrade in order to Fix PoW.
The PoW will be set to 0.01 CPTL Once Money Supply is at 130Mil CPTL
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DOWNLOADS
==> Please upgrade your client. <==
09/03/14 - Windows Wallet CapitalCoin-qt-v1.4.2.0.zip VirusTotal
09/03/14 - Linux QT Wallet CapitalCoin-qt-v1.4.2.0.tar.bz2
Source
Releases
September 03, 2014, 06:35:54 AM
Thanks, I will be submitting it.
September 01, 2014, 08:15:11 AM
August 30, 2014, 11:44:18 AM
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The Original Dev Never placed an End for the PoW, I'm currently testing the New Code to stop the PoW.
Once implemented the PoW will be set to 0.01 CPTL.
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The Original Dev Never placed an End for the PoW, I'm currently testing the New Code to stop the PoW.
Once implemented the PoW will be set to 0.01 CPTL.
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
August 26, 2014, 10:00:33 PM
Update 08/26/2014
Allow the default key to be unavailable - This solves the issue where no default key can be added after -salvagewallet.
Add input weight to coin control interface
Added importwallet and dumpwallet implementations to walletdb.cpp
Added timestamps encoding and decoding functions to util.cpp
Implement DumpWallet and ImportWallet calls from menu.
Stake miner status icon
CheckTransaction() strengthening
RPC: repairwallet removes orphan related records from the wallet
Add -mininput=value option - Allows user to set sultable input value limit
Add -confchange=0 option - This option cold be used to modify a behavior for IsConfirmed() function.
Add -enforcecanonical option - Allows user enforce transaction scripts to use canonical PUSH operators, enabled by default.
Update to guiutil.cpp - Fix old bug in GUI with HtmlEscape(tooltip)
Bitcoin-Qt: fix known addressbook bugs
Bugfix: Avoid trying to parse outputs that aren't relevant to CWalletTx::GetAmounts
Bugfix: Supress "address" key in transaction details, when the destination isn't recognized - Previously, it would pass corrupt/random through base58.
QT: sort transactions by date
08/26/14 - Windows Wallet CapitalCoin-qt-v1.4.1.0.zip VirusTotal
08/26/14 - Linux QT Wallet CapitalCoin-qt-v1.4.1.0.tar.bz2
Source
Releases
Allow the default key to be unavailable - This solves the issue where no default key can be added after -salvagewallet.
Add input weight to coin control interface
Added importwallet and dumpwallet implementations to walletdb.cpp
Added timestamps encoding and decoding functions to util.cpp
Implement DumpWallet and ImportWallet calls from menu.
Stake miner status icon
CheckTransaction() strengthening
RPC: repairwallet removes orphan related records from the wallet
Add -mininput=value option - Allows user to set sultable input value limit
Add -confchange=0 option - This option cold be used to modify a behavior for IsConfirmed() function.
Add -enforcecanonical option - Allows user enforce transaction scripts to use canonical PUSH operators, enabled by default.
Update to guiutil.cpp - Fix old bug in GUI with HtmlEscape(tooltip)
Bitcoin-Qt: fix known addressbook bugs
Bugfix: Avoid trying to parse outputs that aren't relevant to CWalletTx::GetAmounts
Bugfix: Supress "address" key in transaction details, when the destination isn't recognized - Previously, it would pass corrupt/random through base58.
QT: sort transactions by date
08/26/14 - Windows Wallet CapitalCoin-qt-v1.4.1.0.zip VirusTotal
08/26/14 - Linux QT Wallet CapitalCoin-qt-v1.4.1.0.tar.bz2
Source
Releases
August 19, 2014, 09:00:54 AM
August 17, 2014, 02:48:55 PM
August 15, 2014, 11:05:32 AM
Bump
August 08, 2014, 04:07:46 PM
Please show your support for the Coin by adding Capitalcoin to your signature.
CAPITALCOIN | CPTL | 0% PreMine | First to use Moore's Law for PoW/PoS
Code:
[url=https://bitcointalksearch.org/topic/ann-capitalcoin-cptl-0-premine-first-moores-law-powpos-on-exchange-683450]CAPITALCOIN | CPTL | 0% PreMine | First to use Moore's Law for PoW/PoS[/url]
August 08, 2014, 01:08:07 PM
August 08, 2014, 09:54:38 AM
Multifaucet.tk set up an faucet for capital coin. You can find it here. There is a donation address if anyone wants to contribute.
August 08, 2014, 07:23:30 AM
FYI . . .
The mining pool at cptl.multi-pool.eu appears to be non functional. Whenever I try to connect to it, the connection fails.
Apparently I am not the only one having connection problems since there are no miners there according to the Pool Statistics.
I think it is safe to say that pool is dead.
The mining pool at cptl.multi-pool.eu appears to be non functional. Whenever I try to connect to it, the connection fails.
Apparently I am not the only one having connection problems since there are no miners there according to the Pool Statistics.
I think it is safe to say that pool is dead.
OP Updated
August 08, 2014, 06:48:58 AM
FYI . . .
The mining pool at cptl.multi-pool.eu appears to be non functional. Whenever I try to connect to it, the connection fails.
Apparently I am not the only one having connection problems since there are no miners there according to the Pool Statistics.
I think it is safe to say that pool is dead.
The mining pool at cptl.multi-pool.eu appears to be non functional. Whenever I try to connect to it, the connection fails.
Apparently I am not the only one having connection problems since there are no miners there according to the Pool Statistics.
I think it is safe to say that pool is dead.
August 07, 2014, 05:44:32 PM
guess i was on wrong fork block explorer says address not seen
I feel your pain . . . I was on wrong fork and mined nearly 1,000,000 coins 
I wondered why I was getting block rewards that were nearly 1000 coins each.
In case you are asking instead of telling about the reward, it was as result of the low difficulty as almost no one was mining on that chain the variable block reward was at its highest (0-1000).
It's all good though.
Jump to: