[ANN] CapitalCoin | CPTL | 0% PreMine | First Moores Law PoW/PoS | ON - EXCHANGE - page 7.

CryptoSkills

full member

Activity: 126

Merit: 100

BitCoin, webdesign and coding.

THE FIRST 10 MINERS WILL GET FREE CPTL WHEN THE FIRST BLOCK WILL BE FOUND! ONLY 0.5% FEE!!!

   Low 0.5% fees!!
   High performance Node.js backend
   User friendly mining client
   Multi-coin Pool
   24/7 Support
   No registration needed! Point your miners to our pool, set your own address and start getting payout every 20 seconds!

   EU based
   DDOS protected

   Under constant improvements for your mining pleasure!

   Why choose a NOMP pool?

   1) It's Safer than a normal Pool. Cause you do not need to give any personal info such email or passwords.

   2) It's faster: point your miners, set your address in your miner config and earn coind immediately with auto payouts every 30 seconds!

   3) It's lighter for your internet connection than normal MPOS pool.

   Are you still waiting to mine on http://pools.cryptoskills.com/ ??

Quote

Quick Guide how to mine on CRYPTOSKILLS POOLS (without even entering the website!!)

Configuration:

Username: your CapitalCoin wallet address

Password: anything (could be a letter or number or whatever you want)

Algorithm: scrypt

URL (difficulty 0.001): stratum+tcp://pools.cryptoskills.com:3009 -->Little Miners
URL (Vardiff 8 ): stratum+tcp://pools.cryptoskills.com:3033
URL (difficulty 256): stratum+tcp://pools.cryptoskills.com:3257--> Bigger Miners

THE FIRST 10 MINERS WILL GET FREE CapitalCoin WHEN THE FIRST BLOCKs WILL BE FOUND!

Bonez58

newbie

Activity: 33

Merit: 0

Why would my wallet, which has been OPEN and mining PoS for some time now, suddenly be Out of Synch with the network?
It has been like this for several (more than 6) hours and it doesn't seem to be catching up.
This has happened on two wallets on different machines?
Very confusing Huh

sixteendigits

sr. member

Activity: 462

Merit: 250

I noticed this coin and it's ultra low difficulty and thought it would be fun to solo for a bit. One problem I see is apparently this coin has been ultra low difficulty for too long, and the planned effect of moore's law + high power ASICs never really happened. So there is a limit of 100 million coins, but nearly 73 million have already been mined. At the rate coins are coming out at this difficulty, that limit of 100 million will be hit fast. Unless this can quickly skyrocket to a multi-gigahash network and stay there, I don't see how this will not require a fork to increase the total number of coins or reduce the reward, most likely a combination of both.

AlexAce420

member

Activity: 155

Merit: 10

Yup, pool needs to be fixed again. =3

akk123

sr. member

Activity: 290

Merit: 250

Quote from: Lima99 on July 26, 2014, 05:47:05 PM

Issue with

https://cptl.brblocks.com.br/

Now resolve you should start receiving payments.

Please continue mining and remember to donate

Pool needs fixing cron job again.

Burninj

legendary

Activity: 1148

Merit: 1000

Anyway to have features from other coin for this one, like anon and co?

BillTech

sr. member

Activity: 296

Merit: 250

checkpoint too old errors back

Lima99

full member

Activity: 137

Merit: 100

Issue with

https://cptl.brblocks.com.br/

Now resolve you should start receiving payments.

Please continue mining and remember to donate

AlexAce420

member

Activity: 155

Merit: 10

Quote from: AlexAce420 on July 25, 2014, 04:51:13 PM

Quote from: Lima99 on July 25, 2014, 04:26:21 PM

Ok
Because you're on a higher number than the explorer unfortunately you will need to download the blockchain again.

But This time use this as your CapitalCoin.conf (change the RPC user and password.)

Code:

rpcuser=SomeUser
rpcpassword=SomePassword
rpcallowip=127.0.0.1
rpcport=22133
port=22033
daemon=1
server=0
listen=0
dnsseed=0
noirc=1
maxconnections=1
connect=31.220.51.2

That will make your client only connect to the block explorer and it should not try to connect to any other node.
Once your are back in sync then go back to using the CapitalCoin.conf on the OP

Edit- I'm in the process of uploading a new bootstrap file, that should be higher than where the fork happened.

Syncing.... Tongue

The blocks look like they're fixed, however I won't know completely until it finishes. I'll keep you updated.

Also thanks alot for the quick support.

The syncing just finished! Guess what!

Finally received my first payout!

**EDIT

The error you see on the bottom of the wallet is now gone.

AlexAce420

member

Activity: 155

Merit: 10

Quote from: Lima99 on July 25, 2014, 05:07:48 PM

Great,

Ok I found the issue
Pool is on the Wrong Chain: ==> ~~Multi-Pool.eu~~

But also I am a little concern about
https://cptl.brblocks.com.br/
As their find block cron is not running, so pay-outs are not being sent.

I've been mining on cptl.brbblocks.com.br for about a week now. I've had one payout go through but yeah, all my coins have been staying unconfirmed.

Lima99

full member

Activity: 137

Merit: 100

Great,

Ok I found the issue
Pool is on the Wrong Chain: ==> ~~Multi-Pool.eu~~

But also I am a little concern about
https://cptl.brblocks.com.br/
As their find block cron is not running, so pay-outs are not being sent.

AlexAce420

member

Activity: 155

Merit: 10

Quote from: Lima99 on July 25, 2014, 04:26:21 PM

Ok
Because you're on a higher number than the explorer unfortunately you will need to download the blockchain again.

But This time use this as your CapitalCoin.conf (change the RPC user and password.)

Code:

rpcuser=SomeUser
rpcpassword=SomePassword
rpcallowip=127.0.0.1
rpcport=22133
port=22033
daemon=1
server=0
listen=0
dnsseed=0
noirc=1
maxconnections=1
connect=31.220.51.2

That will make your client only connect to the block explorer and it should not try to connect to any other node.
Once your are back in sync then go back to using the CapitalCoin.conf on the OP

Edit- I'm in the process of uploading a new bootstrap file, that should be higher than where the fork happened.

Syncing.... Tongue

The blocks look like they're fixed, however I won't know completely until it finishes. I'll keep you updated.

Also thanks alot for the quick support.

Lima99

full member

Activity: 137

Merit: 100

Ok
Because you're on a higher number than the explorer unfortunately you will need to download the blockchain again.

But This time use this as your CapitalCoin.conf (change the RPC user and password.)

Code:

rpcuser=SomeUser
rpcpassword=SomePassword
rpcallowip=127.0.0.1
rpcport=22133
port=22033
daemon=1
server=0
listen=0
dnsseed=0
noirc=1
maxconnections=1
connect=31.220.51.2

That will make your client only connect to the block explorer and it should not try to connect to any other node.
Once your are back in sync then go back to using the CapitalCoin.conf on the OP

Edit- I'm in the process of uploading a new bootstrap file, that should be higher than where the fork happened.

AlexAce420

member

Activity: 155

Merit: 10

Quote from: Lima99 on July 25, 2014, 07:44:26 AM

Everyone needs to make sure that they are on the correct fork
https://bitcointalksearch.org/topic/m.7966986
There was some code change in order to stop all the orphan blocks and issue the blockchain was having. But it looks like not everyone upgraded in time and the coin forked.
Follow the steps above and verify that you get back in sync with the official block explorer if you are not already.
http://capitalcoin.minepools.net:12570/chain/CapitalCoin

Done this three times and my coins aren't showing up.... Keep saying 257332 blocks, but the block explorer doesn't even go that high. Is there something wrong with the bootstrap file?

Lima99

full member

Activity: 137

Merit: 100

Quote from: Lima99 on July 25, 2014, 07:44:26 AM

Everyone needs to make sure that they are on the correct fork
https://bitcointalksearch.org/topic/m.7966986
There was some code change in order to stop all the orphan blocks and issue the blockchain was having. But it looks like not everyone upgraded in time and the coin forked.
Follow the steps above and verify that you get back in sync with the official block explorer if you are not already.
http://capitalcoin.minepools.net:12570/chain/CapitalCoin

Bump

Lima99

full member

Activity: 137

Merit: 100

Quote from: PapillonV on July 25, 2014, 12:49:42 PM

When the exit to BITtrex is planned?

The only reason why we are not on BITtrex is because there is not much following for the Coin. The last they informed me was that they were going to keep and eye out if they see that the coin start gaining momentum that they will list the coin back in their exchange.

PapillonV

hero member

Activity: 593

Merit: 500

When the exit to BITtrex is planned?

Lima99

full member

Activity: 137

Merit: 100

Everyone needs to make sure that they are on the correct fork
https://bitcointalksearch.org/topic/m.7966986
There was some code change in order to stop all the orphan blocks and issue the blockchain was having. But it looks like not everyone upgraded in time and the coin forked.
Follow the steps above and verify that you get back in sync with the official block explorer if you are not already.
http://capitalcoin.minepools.net:12570/chain/CapitalCoin

Lima99

full member

Activity: 137

Merit: 100

UPDATE 7/24/14
Implemented feature to unlock wallet for minting only

Code:

walletpassphrase YourVeryLongWalletPassword 9999999 true

Minor updates to send coins tab and address book tab
Updated labels and icon for transactions tab.

If while minting your Client is using a lot of CPU you may add the following to your config.

Code:

reservebalance=

and enter a number of about half of your total coins. That will stop the client from trying to weight all your coins all the time.

akk123

sr. member

Activity: 290

Merit: 250

Topic: [ANN] CapitalCoin | CPTL | 0% PreMine | First Moores Law PoW/PoS | ON - EXCHANGE - page 7. (Read 23665 times)