[ANN] ccminer 2.3 - opensource - GPL (tpruvot) - page 114.

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: myagui on September 23, 2016, 08:26:31 AM

Quote from: tbearhere on September 23, 2016, 08:20:27 AM

Is the difficulty d=256 really needed for lbry bat file? thx

Not at all tbearhere. I've become used to always setting fixed difficulty, and adjust as necessary for my hashrate, but dynamic/vardiff works just fine also. If you don't set a particular diff, it will just keep adjusting itself to maintain a reasonable rate of shares per minute.

If using fixed diff, based on my personal experiences, I would suggest something in the region of d=128 for <250MH/s, d=256 for <500MH/s, and d=512 for 500MH/s upwards. I have not tested above 1GH/s for a single rig/miner though.

Thanks myagui.... just woundering if that build really needed it. I haven't used difficulty setting in my bat files for a long time.

ioglnx

sr. member

Activity: 574

Merit: 250

Fighting mob law and inquisition in this forum

Wow the new version gives me for each card now 400MH/s on Lbry at just 80% TDP before it was 112TDP and 360MH/s.
Good work man. MY first 10 lbry will dedicated for you

Epsylon3

legendary

Activity: 1484

Merit: 1082

ccminer/cpuminer developer

yep, not the first time this wallet locks :/

scryptr

legendary

Activity: 1797

Merit: 1028

YESCRYPT POO)L IS DOWN--

For a couple of hours, my miners cannot connect. Graph statistics on YIIMP indicate a pool failure of some sort. --

EDIT: WOOOOPS! Pool is responding again. --scryptr

myagui

legendary

Activity: 1154

Merit: 1001

Quote from: rednoW on September 23, 2016, 01:15:27 PM

Quote from: pallas on September 23, 2016, 11:13:39 AM

Does the Palit have good cooling system? Ball bearing fans? I thought it was a cheap brand.

copper plate to contact with gpu, 5 heat pipes, cooling for vrm and gpu, huge radiator. Best cooling system on gtx1070 market. Fans are sleeve bearings ... will see how long they will survive ))

Personally I prefer the EVGA Hybrids. Really cool and quiet. A bit expensive though.

rednoW

legendary

Activity: 1510

Merit: 1003

Quote from: pallas on September 23, 2016, 11:13:39 AM

Does the Palit have good cooling system? Ball bearing fans? I thought it was a cheap brand.

copper plate to contact with gpu, 5 heat pipes, cooling for vrm and gpu, huge radiator. Best cooling system on gtx1070 market. Fans are sleeve bearings ... will see how long they will survive ))

_javi_

hero member

Activity: 968

Merit: 624

Still a manic miner

Quote from: rednoW on September 23, 2016, 11:10:42 AM

Quote from: richx on September 23, 2016, 11:06:45 AM

+3-5% hashrate on my 1070, with the same power limit.
275-285Mh. can anyone tell me how to overclocking to get 320M or so? thanks!

320m requires high power limit => high voltage and high consumpion (190watt). You need a card with good cooling like Palit gamerock or jetstream. And economicaly it is not worth it.
Better to go with 120-130 watt and 280-300 mhs

100% agreed.

those hashrates are for showing off Cool

and it seems the Palits are triple width cards with huUUuge radiators. Ugly looking, but best efficiency.

Gigabyte G1 and MSi here, 140w/80% (nvidia-smi) and 280-290 mhs

richx

newbie

Activity: 25

Merit: 0

Quote from: rednoW on September 23, 2016, 11:10:42 AM

Quote from: richx on September 23, 2016, 11:06:45 AM

+3-5% hashrate on my 1070, with the same power limit.
275-285Mh. can anyone tell me how to overclocking to get 320M or so? thanks!

320m requires high power limit => high voltage and high consumpion (190watt). You need a card with good cooling like Palit gamerock or jetstream. And economicaly it is not worth it.
Better to go with 120-130 watt and 280-300 mhs

my card is evga 1070 SC and FTW with good cooling.
GPU-Z screenshot:
https://i.imgsafe.org/5465e3d3d8.jpg

pallas

legendary

Activity: 2716

Merit: 1094

Black Belt Developer

Quote from: rednoW on September 23, 2016, 11:10:42 AM

Quote from: richx on September 23, 2016, 11:06:45 AM

+3-5% hashrate on my 1070, with the same power limit.
275-285Mh. can anyone tell me how to overclocking to get 320M or so? thanks!

320m requires high power limit => high voltage and high consumpion (190watt). You need a card with good cooling like Palit gamerock or jetstream. And economicaly it is not worth it.
Better to go with 120-130 watt and 280-300 mhs

Does the Palit have good cooling system? Ball bearing fans? I thought it was a cheap brand.

rednoW

legendary

Activity: 1510

Merit: 1003

Quote from: richx on September 23, 2016, 11:06:45 AM

+3-5% hashrate on my 1070, with the same power limit.
275-285Mh. can anyone tell me how to overclocking to get 320M or so? thanks!

320m requires high power limit => high voltage and high consumpion (190watt). You need a card with good cooling like Palit gamerock or jetstream. And economicaly it is not worth it.
Better to go with 120-130 watt and 280-300 mhs

richx

newbie

Activity: 25

Merit: 0

+3-5% hashrate on my 1070, with the same power limit.
275-285Mh. can anyone tell me how to overclocking to get 320M or so? thanks!
https://i.imgsafe.org/5465e3d3d8.jpg

giagge

legendary

Activity: 1134

Merit: 1001

Epsylon3 i love you!

Thanks for 1.8.2 its a very good! .

.

jk_14

legendary

Activity: 1292

Merit: 1000

Quote from: tbearhere on September 23, 2016, 08:26:14 AM

Quote from: Nikolaj on September 23, 2016, 07:50:26 AM

I gave almost the same amount of money to him as sp and wolf, in donations. You?

Who me?

in usd $400 usd so far. Wink

but I'm sure there are some guys seriously considering recently the payment of 0.1btc (and 3.33% fee) for SP-MOD
- and now won't donate a single satoshi for something what is:
a) better
b) coherent with whole bitcoin idea (i.e. opensource model)

Sad

myagui

legendary

Activity: 1154

Merit: 1001

Quote from: tbearhere on September 23, 2016, 08:20:27 AM

Is the difficulty d=256 really needed for lbry bat file? thx

Not at all tbearhere. I've become used to always setting fixed difficulty, and adjust as necessary for my hashrate, but dynamic/vardiff works just fine also. If you don't set a particular diff, it will just keep adjusting itself to maintain a reasonable rate of shares per minute.

If using fixed diff, based on my personal experiences, I would suggest something in the region of d=128 for <250MH/s, d=256 for <500MH/s, and d=512 for 500MH/s upwards. I have not tested above 1GH/s for a single rig/miner though.

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: Nikolaj on September 23, 2016, 07:50:26 AM

I gave almost the same amount of money to him as sp and wolf, in donations. You?

Who me?

in usd $400 usd so far. Wink

tbearhere

legendary

Activity: 3164

Merit: 1003

Is the difficulty d=256 really needed for lbry bat file? thx

Nikolaj

sr. member

Activity: 445

Merit: 255

I gave almost the same amount of money to him as sp and wolf, in donations. You?

jk_14

legendary

Activity: 1292

Merit: 1000

Quote from: Nikolaj on September 23, 2016, 04:56:53 AM

donate guys !

This guy deserves a real thank you, in form of BTC's

it's still waiting for your donations!

rednoW

legendary

Activity: 1510

Merit: 1003

the yiimp lbry pool definitely has some issues again (( Pool hash is down to 50 ghs

Nikolaj

sr. member

Activity: 445

Merit: 255

Quote from: tbearhere on September 22, 2016, 05:58:40 PM

Quote from: Epsylon3 on September 22, 2016, 05:30:09 PM

i made the binary today, so, i dont mine with it since 4 Wink

but i was mining/testing with this kernel code this week yes

else what did you eat yesterday ?

I thought you said you would take my hashing ... like 2% for payment for improvement ... or am I mistaken.

no hidden fee so 100% yours, with sp LBRY 3 instead you've got a 3.3 (that due downtime could be easily 100-3.3-0.5%, loss due reconnections, = 96.2% )

Tpruvot kernel it's faster in the client side and obviously in the final percentage.

Topic: [ANN] ccminer 2.3 - opensource - GPL (tpruvot) - page 114. (Read 500113 times)