[ANN] ccminer 2.3 - opensource - GPL (tpruvot) - page 90.

daberti

sr. member

Activity: 266

Merit: 250

Quote from: Epsylon3 on April 17, 2017, 06:26:16 AM

the 750ti and the pascal optimal launch settings are very different and depends on the OS and if you use the gpu to display too, ive put a default which is near to the best for these and the 2 OS.

But, well, there is some research to do to find the best for a specific one

I'm using W10 Home (and Pro) 64bit and not using 1050Ti for display as I use the Intel GPU for that.
So, other than -l 32x16 what would you recommend me?

Thanks

P.S.
I would greatly appreciate a small guide to build from your SW from source in my Win 64 environment, Visual Studio Community 2015 SP3 and Cuda 8 already installed.

Epsylon3

legendary

Activity: 1484

Merit: 1082

ccminer/cpuminer developer

the 750ti and the pascal optimal launch settings are very different and depends on the OS and if you use the gpu to display too, ive put a default which is near to the best for these and the 2 OS.

But, well, there is some research to do to find the best for a specific one

daberti

sr. member

Activity: 266

Merit: 250

@Epsylon

I wonder whether this figures are the same that you have (AEON mining):
GTX 940M: slightly less than 160H/s
GTX 960M: slightly less than 400H/s
GTX 750Ti: slightly less than 600H/s
GTX 1070: slightly less than 1100H/s

I expected a bit more from the latter two.

Thanks

daberti

sr. member

Activity: 266

Merit: 250

Quote from: Epsylon3 on April 16, 2017, 10:31:56 AM

Thanks, indeed its possible, to know the block height i need to have a standard stratum coinbase, xmr coins doesn't have it (same for equihash nicehash stratum)

Fully deserved Wink

Block height: understood

Thanks

Epsylon3

legendary

Activity: 1484

Merit: 1082

ccminer/cpuminer developer

Thanks, indeed its possible, to know the block height i need to have a standard stratum coinbase, xmr coins doesn't have it (same for equihash nicehash stratum)

daberti

sr. member

Activity: 266

Merit: 250

Epsylon, mining on https://aeon.kryptopool.com/# but also other Aeon pools i noticed that the informative "New block detected" message does not appear.

Any clue?

P.S.
Donation just sent

with BTC transaction into
8a5192301da7fb8318377f5a45f72f039b903f8ced21f47c2cd2c0c6de92c535

bensam1231

legendary

Activity: 1764

Merit: 1024

Quote from: Slava_K on April 15, 2017, 08:33:22 AM

Quote from: scryptr on April 13, 2017, 04:39:12 PM

YIIMP IS DOWN--

My miners cannot connect, and the website won't display. --scryptr

Use nicehash. Less profit, but more stable.

Loooot less profit. Basically pissing away earnings.

Pretty sure Eps put a limit on the DCR pool, which is a shame. Right now it has like 3% of the network which isn't enough to push down variability.

scryptr

legendary

Activity: 1797

Merit: 1028

Quote from: Slava_K on April 15, 2017, 08:33:22 AM

Quote from: scryptr on April 13, 2017, 04:39:12 PM

YIIMP IS DOWN--

My miners cannot connect, and the website won't display. --scryptr

Use nicehash. Less profit, but more stable.

MORE VARIETY ON YIIMP--

I use NiceHash, but there are several algos and coins on YIIMP that earn well. Niche coins can turn a good profit if mined at the right time.

Besides, the recent stability problems were due to hacking, not poor pool management. --scryptr

Slava_K

hero member

Activity: 677

Merit: 500

Quote from: scryptr on April 13, 2017, 04:39:12 PM

YIIMP IS DOWN--

My miners cannot connect, and the website won't display. --scryptr

Use nicehash. Less profit, but more stable.

daberti

sr. member

Activity: 266

Merit: 250

Quote from: Epsylon3 on April 14, 2017, 10:21:59 AM

daberti: that look like a cursor... i dont think its present on windows 7... only seen it in sgminer

Understood.

Thanks

Epsylon3

legendary

Activity: 1484

Merit: 1082

ccminer/cpuminer developer

It's kind to you, appreciate it (even if the sum of the gifts are now more or equal to the loss :p)

daberti: that look like a cursor... i dont think its present on windows 7... only seen it in sgminer

bensam1231

legendary

Activity: 1764

Merit: 1024

Quote from: Epsylon3 on April 13, 2017, 07:16:10 PM

maintenance required following a hack... will be busy on that for 24h...

For the story, 31 DCR were stolen, and 1660 LBC, by some web server session hacking method.. (and also some dust from a few other coins)

Rewards on DCR were a bit messed up due to the reboot without closing the wallet properly... which made "orphans" and has dropped the earnings.

It took me some time to reimport the relevant backups to be able to restore them, its why the decred pool is stopped, to allow users to review their balance graph and understand what im doing...

So i had to rebuy these amounts from my pocket (and from two DCR donators/friends) after some "panic code to secure yiimp" yesterday evening.. and im now swapping mining wallets one by one.

Relevant txs :
DCR: https://mainnet.decred.org/address/DsXdQrmUFsYebPirWVfmV2TjgyG5Si94UeA
LBC: https://explorer.lbry.io/address/bKUDoSWWq8C7ZPyUxLgug7ZQ47qjZ24Fgy
BSD: https://chainz.cryptoid.info/bsd/address.dws?iMQTwUoSNJHUc79h3thRqJpKfFHLnj7iwW.htm (sent to cryptopia)

An extra DCR block reward was distributed to the users as compensation for the down time... Decred pool should be back online this evening

Here's some fix it funding.

TX: 6e6613e21d3fcc172c895fcb49aebc692326ae9a3b6780ce4582dabe5fe87637

daberti

sr. member

Activity: 266

Merit: 250

quote author=Epsylon3 link=topic=770064.msg18585225#msg18585225 date=1492169671]
euh, unsure i understand what you mean by " thick White horizontal line in the rightmost position of the line"

could you do some screenshot ?
[/quote]

Sure. As soon as I'll see it again.
It is like an underscore char, White and bold.

EDIT:
Here we go
https://www.dropbox.com/s/dyurw5azmd8ze84/The_white_line.jpg?dl=0

Epsylon3

legendary

Activity: 1484

Merit: 1082

ccminer/cpuminer developer

euh, unsure i understand what you mean by " thick White horizontal line in the rightmost position of the line"

could you do some screenshot ?

daberti

sr. member

Activity: 266

Merit: 250

Quote from: Epsylon3 on September 05, 2014, 02:00:05 AM

Welcome to the discussion thread for my ccminer fork.

This variant was based on cbuchner1 v1.2 beta, and now supports colored output, stats API, multiple pools, conditional mining and time limits, and many other features.

It contains most algorithms, except the ones specifically made cpu such as m7m. Some of the first algorithms were implemented by djm34, adapted to be usable on both linux and windows.
My releases are generally tuned for the Geforce GTX 750Ti, which is a good reference for tests (Linux + Windows) and has less hashrate drop in activity (unlike the 9xx series).

Epsylon, I'm using latest version (win binaries) on https://aeon.kryptopool.com/#
Geforce GTX 750Ti here, with latest NVidia win64 driver and 575 H/s.
Every now and then I can spot in the output a thick White horizontal line in the rightmost position of the line.
What is its meaning?

Thanks for your SW.

Epsylon3

legendary

Activity: 1484

Merit: 1082

ccminer/cpuminer developer

maintenance required following a hack... will be busy on that for 24h...

For the story, 31 DCR were stolen, and 1660 LBC, by some web server session hacking method.. (and also some dust from a few other coins)

Rewards on DCR were a bit messed up due to the reboot without closing the wallet properly... which made "orphans" and has dropped the earnings.

It took me some time to reimport the relevant backups to be able to restore them, its why the decred pool is stopped, to allow users to review their balance graph and understand what im doing...

So i had to rebuy these amounts from my pocket (and from two DCR donators/friends) after some "panic code to secure yiimp" yesterday evening.. and im now swapping mining wallets one by one.

Relevant txs :
DCR: https://mainnet.decred.org/address/DsXdQrmUFsYebPirWVfmV2TjgyG5Si94UeA
LBC: https://explorer.lbry.io/address/bKUDoSWWq8C7ZPyUxLgug7ZQ47qjZ24Fgy
BSD: https://chainz.cryptoid.info/bsd/address.dws?iMQTwUoSNJHUc79h3thRqJpKfFHLnj7iwW.htm (sent to cryptopia)

An extra DCR block reward was distributed to the users as compensation for the down time... Decred pool should be back online this evening

scryptr

legendary

Activity: 1797

Merit: 1028

Quote from: rednoW on April 13, 2017, 04:42:56 PM

Quote from: scryptr on April 13, 2017, 04:39:12 PM

YIIMP IS DOWN--

My miners cannot connect, and the website won't display. --scryptr

yes, and the latest 4 decred blocks were orphaned ... 1 day work in vain ((

YIIMP IS UP--

Maybe some changes, too. --scryptr

rednoW

legendary

Activity: 1510

Merit: 1003

Quote from: scryptr on April 13, 2017, 04:39:12 PM

YIIMP IS DOWN--

My miners cannot connect, and the website won't display. --scryptr

yes, and the latest 4 decred blocks were orphaned ... 1 day work in vain ((

scryptr

legendary

Activity: 1797

Merit: 1028

YIIMP IS DOWN--

My miners cannot connect, and the website won't display. --scryptr

agente

full member

Activity: 239

Merit: 100

Quote from: rednoW on April 09, 2017, 11:57:01 PM

Is there any reason or user experience why I am getting only 50-60% of miner-shown speed on MPOS pools like miningpoolhub or theblocksfactory? One day graph on the also show ~60% of miner shown speed.
I was trying myr-groestl and lyra2z algos and was very disappointed with the results - only half from expected ((
I am using latest ccminer 2.0 and ccminer-alexis 1.0 with gtx1070 and gtx750

Same problem here. I know many users have problems with miningpoolhub lyra2z and ccminer 2.0

Topic: [ANN] ccminer 2.3 - opensource - GPL (tpruvot) - page 90. (Read 500193 times)