Pages:
Author

Topic: [ANN] [CHC] Chaincoin - Network Upgrade 16.1 - SegWit Activated - page 64. (Read 321645 times)

newbie
Activity: 64
Merit: 0
The fact that you are crying about the same thing in different channels, without giving us details on what happend makes it really hard to judge the whole situation Smiley

Also i find it very hard to believe that you were banned only cause you asked a simple support question, what are you not telling us? Cheesy

Haha I agree! You simple just have to use the correct support channel in the slack and no worries. Lot's of helpful people there! Smiley
member
Activity: 103
Merit: 10
Guys, can you do something about that brakmic guy that rules the slack? He is totally out of control. I cant ask a simple support question without having my accounts banned. Would be great to have face outward that is not a lunatic!!



The fact that you are crying about the same thing in different channels, without giving us details on what happend makes it really hard to judge the whole situation Smiley

Also i find it very hard to believe that you were banned only cause you asked a simple support question, what are you not telling us? Cheesy
newbie
Activity: 2
Merit: 0
Guys, can you do something about that brakmic guy that rules the slack? He is totally out of control. I cant ask a simple support question without having my accounts banned. Would be great to have face outward that is not a lunatic!!
member
Activity: 111
Merit: 10
is this coin still alive , has the masternode been updateds , or is it still random rewards , pls fix it , every one should get a fair share

Everyone is getting a fair share. It is still random. People just don't know how to setup their MNs properly and are blaming the system. Dash changed the reward system in v0.12 so CHC will probably have the same change after v0.12 is implemented. It was on the roadmap last time I checked. But this new system will be even worse for people who don't know how to setup their MN.   
m33
legendary
Activity: 1064
Merit: 1000
Never invest with borrowed coins
is this coin still alive , has the masternode been updateds , or is it still random rewards , pls fix it , every one should get a fair share
newbie
Activity: 6
Merit: 0
Hi all,
I am having  trouble compiling my first masternode and have the following error immediately before the 'make' command is used. (My swapfile size seems large enough...)

Code:
checking whether bswap_16 is declared... yes
checking whether bswap_32 is declared... yes
checking whether bswap_64 is declared... yes
checking whether __builtin_clz is declared... yes
checking whether __builtin_clzl is declared... yes
checking whether __builtin_clzll is declared... yes
checking for SSL... yes
checking for CRYPTO... yes
checking for EVENT... no
configure: error: libevent not found.
****************@**************** :~/chaincoin$ make
make: *** No targets specified and no makefile found.  Stop.

Hi! You need to install the libevent dependency in order to compile the latest chaincoin build. Run the following command and then you should be ready to compile! Smiley

Code:
sudo apt-get install libevent-dev

Hi guys.
Tell me please how to disconnect the Masternode and withdraw funds from the wallet?
newbie
Activity: 64
Merit: 0
Hi all,
I am having  trouble compiling my first masternode and have the following error immediately before the 'make' command is used. (My swapfile size seems large enough...)

Code:
checking whether bswap_16 is declared... yes
checking whether bswap_32 is declared... yes
checking whether bswap_64 is declared... yes
checking whether __builtin_clz is declared... yes
checking whether __builtin_clzl is declared... yes
checking whether __builtin_clzll is declared... yes
checking for SSL... yes
checking for CRYPTO... yes
checking for EVENT... no
configure: error: libevent not found.
****************@**************** :~/chaincoin$ make
make: *** No targets specified and no makefile found.  Stop.

Hi! You need to install the libevent dependency in order to compile the latest chaincoin build. Run the following command and then you should be ready to compile! Smiley

Code:
sudo apt-get install libevent-dev
newbie
Activity: 3
Merit: 0
Hi all,
I am having  trouble compiling my first masternode and have the following error immediately before the 'make' command is used. (My swapfile size seems large enough...)

Code:
checking whether bswap_16 is declared... yes
checking whether bswap_32 is declared... yes
checking whether bswap_64 is declared... yes
checking whether __builtin_clz is declared... yes
checking whether __builtin_clzl is declared... yes
checking whether __builtin_clzll is declared... yes
checking for SSL... yes
checking for CRYPTO... yes
checking for EVENT... no
configure: error: libevent not found.
****************@**************** :~/chaincoin$ make
make: *** No targets specified and no makefile found.  Stop.
newbie
Activity: 64
Merit: 0
Hi Guys
is there any telegram group for this coin, i was blocked by the admin 

Hello! Chain coin's official Telegram group is here https://t.me/chaincoin.

Where did you get blocked at? The slack group?
newbie
Activity: 2
Merit: 0
Hi Guys
is there any telegram group for this coin, i was blocked by the admin 
full member
Activity: 224
Merit: 100


the dev team and the work they made so far are one big fat joke and only ignorant cant understand why this coin is dead.
GTFO please.
I'm really tired of your entire bullshit. I'm not a fan or a con of CHC, I mined it for a week and I'm following this topic. Just that.
 For over 1 month or more, I've read your posts and I'm disgusted. Not because of your shitty posts, but of your insistence. If you see no one is taking your advice seriously, just please stop spreading shits.

Thank you.
Now bye!

Hi! Cheesy Try not to let these trolls get to you if possible. Seems like they exist everywhere and we're just gonna have to learn to ignore them until they want to be constructive. They have sour attitudes sure, but they could change in the future and be a good little boy or girl lol. So I stay light hearted and just chuckle at what haters say unless they can support their claims with good, solid evidence then I'll listen. But until then they're just like court jesters to me! :p

Cheers!

yup, buy more CHC and lose more money, always listen to people who run or OWN CHC Smiley Smiley
newbie
Activity: 6
Merit: 0
I fixed it and ran it, how to check it works?

You can check to see if your masternode is enabled by running
Code:
chaincoind masternodelist status your-masternode-ip-address-here

It should then tell you it's enabled. Smiley


I started the masternode, it was written masternode started, after 4 hours on the account as before 1000 (CHC), I suspect that it does not work.
Who can write briefly what to write in the Configuration file?
Pleaseee

It can take up to a week to get your first payout. I'm running 7 masternodes and they are all paying out every 1-2 days. Just wait a little bit longer to see if you get any payout. Cheesy

Send an example filled with Chaincoin.conf please
newbie
Activity: 64
Merit: 0
Good news! The social tab has finally been updated on coinmarketcap for CHC -> https://coinmarketcap.com/currencies/chaincoin/#social Woot woot!

Make sure to follow them if you're not already!  Grin
newbie
Activity: 64
Merit: 0


the dev team and the work they made so far are one big fat joke and only ignorant cant understand why this coin is dead.
GTFO please.
I'm really tired of your entire bullshit. I'm not a fan or a con of CHC, I mined it for a week and I'm following this topic. Just that.
 For over 1 month or more, I've read your posts and I'm disgusted. Not because of your shitty posts, but of your insistence. If you see no one is taking your advice seriously, just please stop spreading shits.

Thank you.
Now bye!

Hi! Cheesy Try not to let these trolls get to you if possible. Seems like they exist everywhere and we're just gonna have to learn to ignore them until they want to be constructive. They have sour attitudes sure, but they could change in the future and be a good little boy or girl lol. So I stay light hearted and just chuckle at what haters say unless they can support their claims with good, solid evidence then I'll listen. But until then they're just like court jesters to me! :p

Cheers!
newbie
Activity: 64
Merit: 0
I fixed it and ran it, how to check it works?

You can check to see if your masternode is enabled by running
Code:
chaincoind masternodelist status your-masternode-ip-address-here

It should then tell you it's enabled. Smiley


I started the masternode, it was written masternode started, after 4 hours on the account as before 1000 (CHC), I suspect that it does not work.
Who can write briefly what to write in the Configuration file?
Pleaseee

It can take up to a week to get your first payout. I'm running 7 masternodes and they are all paying out every 1-2 days. Just wait a little bit longer to see if you get any payout. Cheesy
full member
Activity: 224
Merit: 100


the dev team and the work they made so far are one big fat joke and only ignorant cant understand why this coin is dead.
GTFO please.
I'm really tired of your entire bullshit. I'm not a fan or a con of CHC, I mined it for a week and I'm following this topic. Just that.
 For over 1 month or more, I've read your posts and I'm disgusted. Not because of your shitty posts, but of your insistence. If you see no one is taking your advice seriously, just please stop spreading shits.

Thank you.
Now bye!

cool story bro, almost interesting. Oh, and Im not going anywhere Wink
member
Activity: 70
Merit: 10
I fixed it and ran it, how to check it works?

You can check to see if your masternode is enabled by running
Code:
chaincoind masternodelist status your-masternode-ip-address-here

It should then tell you it's enabled. Smiley


I started the masternode, it was written masternode started, after 4 hours on the account as before 1000 (CHC), I suspect that it does not work.
Who can write briefly what to write in the Configuration file?
Pleaseee
Here's a copy of my chaincoin.conf, which is working:

Code:
rpcuser=ubuntu
rpcpassword=
server=1
listen=1
masternode=1
masternodeprivkey=
masternodeaddr=54.183.162.131:11994


One other thing you can do is check your debug.log file, do this:

cd ~\.chaincoin
cat debug.log | grep "capable"

You should see a log line with the phrase "capable masternode!" signalling that you have the correct number of CHC in your wallet.  You may also see that the system is still waiting for out of 15 confirmations, which is necessary before the masternode is deemed "capable".
member
Activity: 131
Merit: 10


the dev team and the work they made so far are one big fat joke and only ignorant cant understand why this coin is dead.
GTFO please.
I'm really tired of your entire bullshit. I'm not a fan or a con of CHC, I mined it for a week and I'm following this topic. Just that.
 For over 1 month or more, I've read your posts and I'm disgusted. Not because of your shitty posts, but of your insistence. If you see no one is taking your advice seriously, just please stop spreading shits.

Thank you.
Now bye!
newbie
Activity: 6
Merit: 0
I fixed it and ran it, how to check it works?

You can check to see if your masternode is enabled by running
Code:
chaincoind masternodelist status your-masternode-ip-address-here

It should then tell you it's enabled. Smiley


I started the masternode, it was written masternode started, after 4 hours on the account as before 1000 (CHC), I suspect that it does not work.
Who can write briefly what to write in the Configuration file?
Pleaseee
newbie
Activity: 64
Merit: 0
I fixed it and ran it, how to check it works?

You can check to see if your masternode is enabled by running
Code:
chaincoind masternodelist status your-masternode-ip-address-here

It should then tell you it's enabled. Smiley
Pages:
Jump to: