Author

Topic: [ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 658. (Read 3426976 times)

sr. member
Activity: 308
Merit: 250
Hello all,

I have a very strange problem i'm hoping somebody can help with.

I set up a bitcoin miner in my basement last week with 2 750tis getting about 570 khash. Would like to squeeze more out of the system but for now I have a bigger problem.

I decided with that system running right below my tv with a 400 dollar HTPC why not just hook up the bitcoin miner and sell the HTPC. So i hooked it up via HDMI, everything was going fine until I ran cudaminer. The program opens and after about 4-5 seconds my mouse and keyboard stop working. I even tried a hard wired mouse and keyboard but still nothing. If I plug in a monitor via dvi along with the hdmi I can control the mouse on the screen with dvi, but still nothing on the big screen via hdmi.

I troubleshot hundreds of problems, but this one has me stumped big time!

Any help would be greatly appreciated!!

Thanks

Hey,
which one of your cards is doing the display? Try setting the -d flag to 0 or 1 so that only 1 card is being mined on. The display on your HDMI should work then. Alternate with the other card as well and see if that works as well. Then maybe you can narrow down the problem. I'm not sure why your mouse and keyboard stop working though. It could just be that the display adapter resets itself so the whole system locks down and resets. (maybe sort of like an unstable OC).
legendary
Activity: 1400
Merit: 1050
@Christian

Does ccminer 0.2 have speed improvements in HVC as well?

I don't think it does...barely any difference here. Fugue yeah, 2x on 750 ti.

No,it doesn't. If you read the thread,Christian mentioned it should be more or less the same,but some people seem to have lower hashes with v0.2,while for others it's the same.

I get lower hashes with both now...not sure why. pissing me off

Is it right after you start the ccminer or after 10~20min ?
I had a problem like that (drop of power to 37%) with my 780ti...
I recompiled the code to turn-off the shared memory feature in the kernel and the problem was solved.

edit: I had the problem with fugue256 (I didn't run on HVC with that version)
sr. member
Activity: 308
Merit: 250
Restart your computer. I dunno if it'll help,but it worked for me a couple of times when the OC settings are reset. Oh,and start with and use only v.0.1 if your hashrate dropped only after using v.0.2. What card are you using?
hero member
Activity: 812
Merit: 1000
@Christian

Does ccminer 0.2 have speed improvements in HVC as well?

I don't think it does...barely any difference here. Fugue yeah, 2x on 750 ti.

No,it doesn't. If you read the thread,Christian mentioned it should be more or less the same,but some people seem to have lower hashes with v0.2,while for others it's the same.

I get lower hashes with both now...not sure why. pissing me off

sr. member
Activity: 308
Merit: 250
@Christian

Does ccminer 0.2 have speed improvements in HVC as well?

I don't think it does...barely any difference here. Fugue yeah, 2x on 750 ti.

No,it doesn't. If you read the thread,Christian mentioned it should be more or less the same,but some people seem to have lower hashes with v0.2,while for others it's the same.
hero member
Activity: 812
Merit: 1000
Any interest in groestlcoin ? https://bitcointalksearch.org/topic/anngrs-groestlcoin-1st-to-activate-segwit-building-lightning-network-525926

Was cpu only for about 2 hours...
There's a bounty for an nvidia gpu miner: standalone gpu miner (NVidia)     120*512=61440

Tried it, blocks don't come easily

stop thinking that we aren't already all over it Wink

because we are.

However this time we ran into technical glitches due to last minute changes to their CPU mining
software. They changed the code on release, which we did not notice.

Christian



Yeah, dark x11 algo, and the sub sha3 candidates would be awesome...we already have great keccak speed with 750 tis.
Big props!
sr. member
Activity: 434
Merit: 250
Im on http://airpool.org/

And i want undermine aircoin , What should I write in. bat .

And

which program to use? ( Cudaminer ?, Or other ? )

I've never used X-11 , its the first .

I Have Nvidia card ( 750 ti ) .


Im use cudaminer.exe -o stratum+tcp://airpool.org:3333 -u WORKER_NAME -p PASSWORD

im go at 310 kh/s for board ( Total now 2 board and im go at 620 kh/s ) Its bad or good ? .


I don't think there is an X11 (darkcoin) algo in cudaminer... maybe you should stick to some coin for a while either than hopping from coin to coin... (difficult, I don't use a lot my own advise)

Lol,no. Aircoin is scrypt. But he's doing ok-ish.
yes, I read a bit too fast... it is in developpement for the future (can you change the algo once it has been release ? or are they planning something like myriad ?)

Yes sorry

I also read in a hurry, to top x11 I read and I had not realized it would be implemented in the future.

damn my bad english Smiley .
hero member
Activity: 812
Merit: 1000
@Christian

Does ccminer 0.2 have speed improvements in HVC as well?

I don't think it does...barely any difference here. Fugue yeah, 2x on 750 ti.
legendary
Activity: 1400
Merit: 1050
Im on http://airpool.org/

And i want undermine aircoin , What should I write in. bat .

And

which program to use? ( Cudaminer ?, Or other ? )

I've never used X-11 , its the first .

I Have Nvidia card ( 750 ti ) .


Im use cudaminer.exe -o stratum+tcp://airpool.org:3333 -u WORKER_NAME -p PASSWORD

im go at 310 kh/s for board ( Total now 2 board and im go at 620 kh/s ) Its bad or good ? .


I don't think there is an X11 (darkcoin) algo in cudaminer... maybe you should stick to some coin for a while either than hopping from coin to coin... (difficult, I don't use a lot my own advise)

Lol,no. Aircoin is scrypt. But he's doing ok-ish.
yes, I read a bit too fast... it is in developpement for the future (can you change the algo once it has been release ? or are they planning something like myriad ?)
full member
Activity: 199
Merit: 100
@Christian

Does ccminer 0.2 have speed improvements in HVC as well?
sr. member
Activity: 308
Merit: 250
Im on http://airpool.org/

And i want undermine aircoin , What should I write in. bat .

And

which program to use? ( Cudaminer ?, Or other ? )

I've never used X-11 , its the first .

I Have Nvidia card ( 750 ti ) .


Im use cudaminer.exe -o stratum+tcp://airpool.org:3333 -u WORKER_NAME -p PASSWORD

im go at 310 kh/s for board ( Total now 2 board and im go at 620 kh/s ) Its bad or good ? .


I don't think there is an X11 (darkcoin) algo in cudaminer... maybe you should stick to some coin for a while either than hopping from coin to coin... (difficult, I don't use a lot my own advise)

Lol,no. Aircoin is scrypt. But he's doing ok-ish.
legendary
Activity: 1400
Merit: 1050
Im on http://airpool.org/

And i want undermine aircoin , What should I write in. bat .

And

which program to use? ( Cudaminer ?, Or other ? )

I've never used X-11 , its the first .

I Have Nvidia card ( 750 ti ) .


Im use cudaminer.exe -o stratum+tcp://airpool.org:3333 -u WORKER_NAME -p PASSWORD

im go at 310 kh/s for board ( Total now 2 board and im go at 620 kh/s ) Its bad or good ? .


I don't think there is an X11 (darkcoin) algo in cudaminer... maybe you should stick to some coin for a while either than hopping from coin to coin... (difficult, I don't use a lot my own advise)
sr. member
Activity: 434
Merit: 250
Im on http://airpool.org/

And i want undermine aircoin , What should I write in. bat .

And

which program to use? ( Cudaminer ?, Or other ? )

I've never used X-11 , its the first .

I Have Nvidia card ( 750 ti ) .


Im use cudaminer.exe -o stratum+tcp://airpool.org:3333 -u WORKER_NAME -p PASSWORD

im go at 310 kh/s for board ( Total now 2 board and im go at 620 kh/s ) Its bad or good ? .

legendary
Activity: 1400
Merit: 1050
Christian, I think there is an airdrop waiting for you (germanycoin airdroping today)

Aren't there two of them?  Tongue
I think I also saw one for netherlands today...
sr. member
Activity: 308
Merit: 250
Christian, I think there is an airdrop waiting for you (germanycoin airdroping today)

Aren't there two of them?  Tongue
legendary
Activity: 1400
Merit: 1050
Christian, I think there is an airdrop waiting for you (germanycoin airdroping today)
sr. member
Activity: 308
Merit: 250
Christian,did you sell all your fugue?  Shocked

no, locked out of my nxt-e account...

What?!  Huh Is all of it in the exchange? Damn...
sr. member
Activity: 308
Merit: 250
Sold my 2 rotoCoins at 0.032, now they are going for 0.05, oh well  Roll Eyes
Fuguecoin price is currently slumping  Angry

 Sad IKR. So much for all those days spent on solo-mining fugue. I'm hoping for an uptrend soon.
hero member
Activity: 756
Merit: 502
Christian,did you sell all your fugue?  Shocked

no, locked out of my nxt-e account...
sr. member
Activity: 434
Merit: 250
Im on http://airpool.org/

And i want undermine aircoin , What should I write in. bat .

And

which program to use? ( Cudaminer ?, Or other ? )

I've never used X-11 , its the first .

I Have Nvidia card ( 750 ti ) .
Jump to: