ok here we go:
COuld you please share the download with the rest of us windows users? Thanks
+1
Topic: [ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 938. (Read 3426921 times)
February 06, 2014, 10:12:38 AM
COuld you please share the download with the rest of us windows users? Thanks
+1
February 06, 2014, 10:11:21 AM
Thanks for the reply. That will be 1:00 AM for me. Looks like a long night for me. Thanks for cudaminer 
February 06, 2014, 10:07:22 AM
from where can I download the wallet for maxcoin? Also, can I solo mine using only cudaminer and wallet?
7:30 PM UTC the wallet will be available for Windows, Mac OS and Linux (source code only?)
February 06, 2014, 10:05:48 AM
I settled for maxrregcount=96 in keccak.cu. Using __launch_bounds__ directives I make sure the other keccak512 kernels (for scrypt-jane) remain at 64 registers so they keep working.
Maybe some guys will want to test the Linux based Makefile.am (run ./autogen.sh) and run it on their GTX 780's, Titans, 780 Ti's and GT 640 with Compute 3.5 ? You can go up to x20 or x21 launch configurations with this register count on Compute 3.5 devices. And hopefully we'll get into the >400 kHash/s range
Maybe some guys will want to test the Linux based Makefile.am (run ./autogen.sh) and run it on their GTX 780's, Titans, 780 Ti's and GT 640 with Compute 3.5 ? You can go up to x20 or x21 launch configurations with this register count on Compute 3.5 devices. And hopefully we'll get into the >400 kHash/s range
February 06, 2014, 10:05:16 AM
Get a GTX780 tomorrow !!!
COuld you please share the download with the rest of us windows users? Thanks
ok here we go:
COuld you please share the download with the rest of us windows users? Thanks
February 06, 2014, 10:04:40 AM
from where can I download the wallet for maxcoin? Also, can I solo mine using only cudaminer and wallet?
February 06, 2014, 10:04:11 AM
oke cbuchner1 thanks for updating, do you have perhaps a good setting for my poor Evga GT610 2 GB card ? i cant get it higher then 7.5 khash/s !
I do not think this device can be much faster. 48 CUDA cores on what I believe to be a single Compute 2.1 multiprocessor.
As you see it's already putting out more heat than your fan (or passive cooling) can transport away.
February 06, 2014, 09:55:38 AM
Available kernel prefixes are:
•L – Legacy cards (Compute 1.x)
•F – Fermi cards (Compute 2.x)
•S – Kepler cards (currently compiled for Compute 1.2) – formerly best for Kepler
•K – Kepler cards (Compute 3.0) – based on Dave Andersen’s work. Now best for Kepler.
•T – Titan, GTX 780 and GK208 based cards (Compute 3.5)
•X – Experimental kernel. Currently requires Compute 3.5
Examples:
•L27x3 is a launch configuration that works well on GTX 260
•F28x4 is a launch configuration that works on Geforce GTX 460
•K290x2 is a launch configuration that works on Geforce GTX 660Ti
•T30x16 is a launch configuration that works on GTX 780Ti.
This is outdated since the 2014-02-02 release. Kernels were swapped out (taking the ones submitted by nVidia now as default). The X kernel also is a different one now, running on Fermi. S and L kernels were removed.
oke cbuchner1 thanks for updating, do you have perhaps a good setting for my poor Evga GT610 2 GB card ? i cant get it higher then 7.5 khash/s !
[ beside you need a verry good cooler becouse it jumps to 104 degrees ! ]
thanks in advanced
February 06, 2014, 09:50:53 AM
ok here we go:
COuld you please share the download with the rest of us windows users? Thanks
February 06, 2014, 09:50:32 AM
Me want! Christian I think something must be throttling back the 780 to the 780ti. There isnt that much performance difference and right now its over a 300Mhash/s difference
February 06, 2014, 09:50:05 AM
What should i put in bat file for gt640 2gb??
I try with this but it wont work. Where is the problem?
cudaminer --algo=keccak -d gt640 -l K2x32 --benchmark
Thank you!
I try with this but it wont work. Where is the problem?
cudaminer --algo=keccak -d gt640 -l K2x32 --benchmark
Thank you!
February 06, 2014, 09:45:13 AM
ok here we go:
February 06, 2014, 09:44:36 AM
Code:
[2014-02-06 14:30:20] GPU #0: GeForce GTX 670, 86719 khash/s
[2014-02-06 14:30:20] Total: 86719 khash/s
[2014-02-06 14:30:25] GPU #0: GeForce GTX 670, 85890 khash/s
[2014-02-06 14:30:25] Total: 85890 khash/s
I dont know how to see gpu work percentage. I am using proprietary drivers.
(Last night I had ~45000 khash/s, alomst doubled over night
) February 06, 2014, 09:41:35 AM
hi all, if we are talking about maxcoin then can someone explain what it has to do with cloud server and PuTTY?
mining in the cloud is one option. You rent a bunch of virtual servers, install mining software on all of them via remote login (PUTTY from windows, ssh from Linux).
Or you just outmine them with one GTX 780. Your choice.
So it is not mandatory if you want to solomine.
February 06, 2014, 09:40:09 AM
hi all, if we are talking about maxcoin then can someone explain what it has to do with cloud server and PuTTY?
mining in the cloud is one option. You rent a bunch of virtual servers, install mining software on all of them via remote login (PUTTY from windows, ssh from Linux).
Or you just outmine them with one GTX 780. Your choice.
February 06, 2014, 09:39:19 AM
Are you sure its 450Mhash/s?
?
Screen shot please :-p
If you tell me how to do this...?Screen shot please :-p
Or take a pic with your smartphone, upload it to some social media site (twitter, facebook whatever) and post a link
February 06, 2014, 09:38:54 AM
hi all, if we are talking about maxcoin then can someone explain what it has to do with cloud server and PuTTY?
February 06, 2014, 09:31:26 AM
Are you sure its 450Mhash/s??
Screen shot please :-p
If you tell me how to do this... ?Screen shot please :-p
February 06, 2014, 09:31:17 AM
You mean the bit before the x32 and increase the L value?
EDIT:
cudaminer --algo=keccak -d gtx780 -L 128 -l K1000x32 --benchmark
129Mhash/s
and you need to upload the image to say imageshack, copy their image link here
EDIT:
cudaminer --algo=keccak -d gtx780 -L 128 -l K1000x32 --benchmark
129Mhash/s
and you need to upload the image to say imageshack, copy their image link here
February 06, 2014, 09:31:07 AM
Can nvidia geforce 7300 GT use this to mine?
no CUDA. A 7300 GT is good for minesweeper though.
Jump to: