[ANN] CureCoin 2.0 is live - Mandatory Update is available now - DEC 2018 - page 220.

ChristianVirtual

member

Activity: 71

Merit: 10

Quote from: Burninj on May 11, 2014, 06:38:58 PM

Quote from: ChristianVirtual on May 11, 2014, 06:32:16 PM

Quote from: Daliss on May 11, 2014, 05:55:24 PM

Is there any tutorial for remote control, because I can't manage to conect to my workers even with firewall off Sad

Try here https://fah-web.stanford.edu/projects/FAHClient/wiki/RemoteClients

Already tried this one but I can't get it to work...

managing 20+ rigs with teamviewer is a pain in the ass, I want to be able to switch from folding to mining instantly...

Make sure to enter the same password on the remote client configuration you want to access to and also in the FAHClient on your workstation.
Can you reach via ping ?

cameronpalte

sr. member

Activity: 294

Merit: 250

The pool should be updated for shorter updates even if the payouts are still once a day to keep people from timing their submissions.

FifthGhostbuster

full member

Activity: 153

Merit: 100

Quote from: hardcoreprime on May 11, 2014, 08:34:30 PM

I've been folding for 24hrs using Cryptobullions pool and haven't gotten a single coin. When are coins dispersed?

Payout occur once every 24 hours. give it a little more time if nothing happens in the next 24 hours then contact either via forums or you can message me and ill try to help you get it worked out. Also make sure you are folding for the correct team. if your pulling up on stats your payout will be secure.
check out this folding guide just make sure everything is set up correctly.
https://www.curecoin.us/index.php?topic=3482.0

Thanks FifthGhostbuster

meelvanchris

sr. member

Activity: 336

Merit: 250

Quote from: hardcoreprime on May 11, 2014, 08:34:30 PM

I've been folding for 24hrs using Cryptobullions pool and haven't gotten a single coin. When are coins dispersed?

Look at daily stats, u will see that instead of blocks ther are day's. Coins get paid /divided once per day according to ppd. (fyi before curecoin, pool got paid in rikcoin... (to avoid confusion as to why so many days..)
So you will get paid like everyone, once per day. As for your 24 hours -> takes time to complete first workunits.. then takes time for points to get credited at curecoin team and then some more time for it to be credited and verified b y cryptobullion. Doublecheck to see your stats/PPD on teampage : http://fah-web.stanford.edu/cgi-bin/main.py?qtype=teampage&teamnum=224497 then doublecheck cryptobullion that you indeed used the exact same username as you do on curecointeam. If it matches then all gotta do is be patient. you will get your coins in due time. (not sure exactly how much time, but i can verify that i have gotten coins and have curecoins in my wallet atm)

cameronpalte

sr. member

Activity: 294

Merit: 250

Quote from: hardcoreprime on May 11, 2014, 08:34:30 PM

I've been folding for 24hrs using Cryptobullions pool and haven't gotten a single coin. When are coins dispersed?

They should be dispersed roughly every 24 hours. Does the pool show you as having any balance under the account balance section? Have you finished any workunits? Have you attached your curecoin address?

hardcoreprime

full member

Activity: 147

Merit: 100

I've been folding for 24hrs using Cryptobullions pool and haven't gotten a single coin. When are coins dispersed?

r3animation

hero member

Activity: 756

Merit: 500

Quote from: Daliss on May 11, 2014, 06:52:00 PM

Quote from: meelvanchris on May 11, 2014, 06:42:31 PM

Quote from: Burninj on May 11, 2014, 06:38:58 PM

managing 20+ rigs with teamviewer is a pain in the ass, I want to be able to switch from folding to mining instantly...

How would you switch from folding to mining from within the f@h client? Im pretty sure the remote access in f@h is just to acces the client remotely.... not the whole pc... (altough could ofc be wrong =)) quote standford :

Quote

Congratulations! FAHControl should connect to the remote client in a few seconds, and allow full access to monitor progress and configure settings.

...

I'm not trying mining with f@h client, I just want to be able to pause all my folding from one client...

Well I used to use FAHControl + CGRemote. I didn't need to disable the firewall, just added an exception.

meelvanchris

sr. member

Activity: 336

Merit: 250

Quote from: Daliss on May 11, 2014, 06:52:00 PM

I'm not trying mining with f@h client, I just want to be able to pause all my folding from one client...

I get that. I just meant to say, that to switch to mining, one would still need access to a machine on order to start the mining process. (if so, then might as well use teamviewer to pause the folding and start the mining) Then again, i have a mere 2 rigs... So i don't pretend to know all there is to know about remote mining... could very well be you have a better way to remotely start the mining on your rigs them teamviewer.... As for the remote connection usage in f@h client, check out foldingforum.org for similar problems... Possible hits :

https://foldingforum.org/viewtopic.php?f=0&t=26036&p=261089&hilit=remote+access#p261089
https://foldingforum.org/viewtopic.php?f=67&t=18414&p=184041&hilit=remote+login#p184041
https://foldingforum.org/viewtopic.php?f=67&t=18154&p=181639&hilit=remote+login#p181639
*please note... only did a quick search, and quick browse reading....so not sure if any of the above help at all... just meant to illustrate about the forum. good luck, hope you find a fix...

Daliss

newbie

Activity: 10

Merit: 0

Quote from: meelvanchris on May 11, 2014, 06:42:31 PM

Quote from: Burninj on May 11, 2014, 06:38:58 PM

managing 20+ rigs with teamviewer is a pain in the ass, I want to be able to switch from folding to mining instantly...

How would you switch from folding to mining from within the f@h client? Im pretty sure the remote access in f@h is just to acces the client remotely.... not the whole pc... (altough could ofc be wrong =)) quote standford :

Quote

Congratulations! FAHControl should connect to the remote client in a few seconds, and allow full access to monitor progress and configure settings.

...

I'm not trying mining with f@h client, I just want to be able to pause all my folding from one client...

meelvanchris

sr. member

Activity: 336

Merit: 250

Quote from: Burninj on May 11, 2014, 06:38:58 PM

managing 20+ rigs with teamviewer is a pain in the ass, I want to be able to switch from folding to mining instantly...

How would you switch from folding to mining from within the f@h client? Im pretty sure the remote access in f@h is just to acces the client remotely.... not the whole pc... (altough could ofc be wrong =)) quote standford :

Quote

Congratulations! FAHControl should connect to the remote client in a few seconds, and allow full access to monitor progress and configure settings.

Burninj

legendary

Activity: 1148

Merit: 1000

Quote from: ChristianVirtual on May 11, 2014, 06:32:16 PM

Quote from: Daliss on May 11, 2014, 05:55:24 PM

Is there any tutorial for remote control, because I can't manage to conect to my workers even with firewall off Sad

Try here https://fah-web.stanford.edu/projects/FAHClient/wiki/RemoteClients

Already tried this one but I can't get it to work...

managing 20+ rigs with teamviewer is a pain in the ass, I want to be able to switch from folding to mining instantly...

cameronpalte

sr. member

Activity: 294

Merit: 250

Quote from: ktbken on May 11, 2014, 06:34:40 PM

Quote from: cygnusxi on May 11, 2014, 03:28:17 PM

We have two more pools updated in OP and Curecoin is on an exchange also updated in OP

Pools
Mining pool 1: http://cure.cryptopools.com/
Mining pool 2: https://cure.united-miners.com/
Mining pool 3: https://www.minep.it/pool/cur/
Mining pool 4: http://betahash.com/getting_started

Exchanges: https://www.scificryptoexchange.com/#/trade/exchange/41

I can not see a cure coin pool at betahash.com

Confirmed I can't see it either.

ktbken

full member

Activity: 158

Merit: 100

Quote from: cygnusxi on May 11, 2014, 03:28:17 PM

We have two more pools updated in OP and Curecoin is on an exchange also updated in OP

Pools
Mining pool 1: http://cure.cryptopools.com/
Mining pool 2: https://cure.united-miners.com/
Mining pool 3: https://www.minep.it/pool/cur/
Mining pool 4: http://betahash.com/getting_started

Exchanges: https://www.scificryptoexchange.com/#/trade/exchange/41

I can not see a cure coin pool at betahash.com

meelvanchris

sr. member

Activity: 336

Merit: 250

Quote from: Daliss on May 11, 2014, 05:55:24 PM

Is there any tutorial for remote control, because I can't manage to conect to my workers even with firewall off Sad

Might sound silly.. but why try to setup remote control f@h client...?Wouldnt it be easier to just have something like teamviewer on all rigs? (i already had that on my rig...works just find for the occational checkup...)

Quote from: mafia on May 11, 2014, 05:40:54 PM

How do you mine with ASIC? Is there any point mining with CPU?

f@h doesnt support asic's. But you can send those hashes to the mining-part of the coin. And get a share of the coins that way.
Cpu can fold. for example. My Amd x4 phenom II 955 yields about 5k PPD. Its not a lot compared to 110k high end gpu can easily get. But still counts in the end. Also, cpu's get different workunits then gpus.. (worth less points obviously) But still manage te complete couple a day. So either way contributing to a cure

ChristianVirtual

member

Activity: 71

Merit: 10

Quote from: Daliss on May 11, 2014, 05:55:24 PM

Is there any tutorial for remote control, because I can't manage to conect to my workers even with firewall off Sad

Try here https://fah-web.stanford.edu/projects/FAHClient/wiki/RemoteClients

Daliss

newbie

Activity: 10

Merit: 0

Is there any tutorial for remote control, because I can't manage to conect to my workers even with firewall off Sad

cameronpalte

sr. member

Activity: 294

Merit: 250

Quote from: mafia on May 11, 2014, 05:40:54 PM

HOw do you mine with ASIC? Is there any point mining with CPU?

ASIC mining is for securing the block chain. There are various pools for it posted on the homepage. CPU mining works but you wouldn't use a CPU for securing the block chain you would use it for folding. A decent CPU can get like 1/6 the PPD of a mid-high end GPU like a 7950 but it's up to you decide if it's worth it.

Philll90

full member

Activity: 238

Merit: 100

Quote from: mafia on May 11, 2014, 05:40:54 PM

HOw do you mine with ASIC? Is there any point mining with CPU?

ASIC -> standard mining in one of the sha-pools
CPU -> folding with the folding-pool

mafia

hero member

Activity: 641

Merit: 500

HOw do you mine with ASIC? Is there any point mining with CPU?

Fastpow

full member

Activity: 322

Merit: 102

Quote from: Philll90 on May 11, 2014, 05:37:23 PM

Quote from: Fastpow on May 11, 2014, 05:01:42 PM

Quote from: Vorksholk on May 11, 2014, 04:52:15 PM

Quote from: kqpahv on May 11, 2014, 02:04:25 PM

Is it normal that two out of four gpus are stuck at 99.99% for half a day ? the other two are finishing projects and starting new things from 0% but those two just stay at 99.99% forever Huh

I find that happening occasionally when I leave a folder on for more than week or two without a reboot. Try rebooting your system.

Could you give an estimate of what 2 280x's should net each day in points? I'd like to know if my settings are right

I get ~110k PPD with one 280x.

I see, then my settings must be way off. I'll look into it tomorrow

Topic: [ANN] CureCoin 2.0 is live - Mandatory Update is available now - DEC 2018 - page 220. (Read 696267 times)