Topic: [ANN] CureCoin 2.0 is live - Mandatory Update is available now - DEC 2018 - page 216. (Read 696254 times)
May 12, 2014, 07:31:06 AM
30 are required for a mined block i checked the code. so a max of 30 should be used. (if they have the funds they could go lower but there arent many sellers on the exchange atm)
May 12, 2014, 07:29:56 AM
how many confirmations for new generated coins?
If you are referring to one of the SHA mining pools you will have to ask the operator of that site if you are having an issue. My first mined Curecoin from a little over 24 hours ago is just beginning to confirm now @ united-miners pool. Not bad for a young blockchain
Oh, yea about that, please pass the word onto them I think they have their pool set to like 120 confirms before payout, only 10 are required, Ahmed went with a happy medium of 30 confirms
May 12, 2014, 07:23:07 AM
Is there a problem with the CryptoBullion pool ? No credit for yesterday's work ? Also the Point counter still low. When checking on official stats or EOC there should be more booked.
Yesterdays work will be credited in roughly 11 hours from now, remember there is only on update per day as of now, due to popular demand Im going to work on making the pool update stats more then once per day, but that is not top priority at the moment.
ChristianFAH 79.35819400 coins earned 5/11/2014
Looks you you got your share of coins yesterday, so later today you will be getting more. You are all set to go, just have to wait for the pool to do its daily update. ( Usually around 6 pm EST )
As far as the point counter, it will always be a bit lower due to the delay in pool updating compared to using something like EOC of the official team pages to see your stats
May 12, 2014, 07:21:43 AM
I dont like the fact that this is a very interesting project yet the lead dev ignores my question about absolutely awfull exchange. Why should we trade curecoins on some tier 5 exchange?
Please get yourself some respect and get curecoin to some renowned exchanges. Greed is great motivation for people to actually start helping. And there wont be any money value without the bigger and proven exchanges.
Or do you own that exchange and promote yourself?
My team is already contacting exchanges and a few exchanges have already contacted me on their own accord. Please allow more than 24 hours for my coin to be placed somewhere famous like cryptsy.
I don't own scifi exchange
cool
I did not want to sound negative...its just that everything looks profi and that exchange is killing it :p
May 12, 2014, 07:19:00 AM
how many confirmations for new generated coins?
If you are referring to one of the SHA mining pools you will have to ask the operator of that site if you are having an issue. My first mined Curecoin from a little over 24 hours ago is just beginning to confirm now @ united-miners pool. Not bad for a young blockchain
May 12, 2014, 07:15:05 AM
Hi!This is very interesting project.I started folging today,but i don't see my work in folding pool,and I can't see me in this sheet -http://fah-web2.stanford.edu/teamstats/team224497.html
Will I see my work next day,or I made something wrong?
Or I need to wait for work progress is 100%?
Will I see my work next day,or I made something wrong?
Or I need to wait for work progress is 100%?
Progress must hit 100% and be successfully uploaded to the collection server. Then allow about an hour or two before you see points here http://fah-web2.stanford.edu/teamstats/team224497.html
It then takes about 24 hours for those points to transfer to https://cryptobullionpools.com
well it's been more like 48 hours, i see myself on the FAH team results page but nothing on the pool? why don't the points transfer more quickly? also i see the cryptobullion pool seems to present my username in full caps on some pages, i entered it all lowercase? however in the edit profile it is all lowercase?
May 12, 2014, 07:14:38 AM
Started folding yesterday but my 2 280x's and 1 I5 are only giving me about 95000 ppd in total.
Any tips on how to improve the ppd?
Try pauzing your cpu. Might be that due fact that your using cpu to fold, gpus not getting the workload they should.Any tips on how to improve the ppd?
Try :Update to catalyst 14.x (but be warned... can up ppd 20%.. can also be buggy and cause you to loose work.. had to learn that myself the hard way =))
Also, can always overclock your cards... Since folding will be less stress / heat on the cards so could push m a bit further then usual when mining
Also wanted to state again.. for the complainers about the exchange... there's no school like old school :
buy & sell thread : https://bitcointalksearch.org/topic/curecoin-buy-and-sell-your-curecoins-here-605734
What would be the optimal engine/memclock settings according to you?
If you search the official folding forums you will see the same answer many times, the F@H software detects your exact type of gpu and factory setting are best. Unlike normal mining where overclocking causes a few hardware errors that do not matter, in the folding world that one little error can mess up the entire work unit. I would go with what the folding pros say and use factory settings to ensure your WU's are not corrupted. If you insist on trying to overclock you will want to do some searching regarding your exact model of card with folding @ home to see if it can be overclocked any without errors.
How can I tell if my WUs are corrupted?
This is something that I think only the people that control the internal F@H servers would be able to detect, which is why overclocking is discouraged for folding. For specifics you will have to search the official folding forum, but make sure you follow their posting rules, or you will get posts deleted very quickly. It is a team neutral site that is focused on the F@H project solely and they do not allow team promotion, among many other rules. I found out the hard way myself.... I had a lot of posts deleted or edited before I figured out they are very straight forward about helping you fold and nothing else. In the long run they are a great community and they will spend a lot of time helping you if you follow posting rules and are polite. There is already a lot of discussion there about overclocking so Id highly recommend doing some searching before asking in a post.
May 12, 2014, 07:07:07 AM
Is there a problem with the CryptoBullion pool ? No credit for yesterday's work ? Also the Point counter still low. When checking on official stats or EOC there should be more booked.
May 12, 2014, 07:03:21 AM
Ah, ok. Just asking since my GPU's are still netting 45kppd each where they should give me around 100k ppd each (According to others.)
Agreed. I would first look at getting your gpu's up to 90k each minimum... only after start looking at oc-ing... Personally i really think its the cpu. On my rig i managed to get my 7950 up to 95k. But then my cpu (dual, not folding) would start bottlenecking bring total of 3 x 7950 down to 130k. Went back to 75k per cards and cpu 90% load and 230k ppdquote from folding forum fyi : ( https://foldingforum.org/viewtopic.php?f=61&t=26289&sid=795b9e9b1c04818403a2c95b63a4f0ee#p263824 )
Quote
Another option that you can use to possibly increase the PPD is by overclocking the GPU. However, you ought to be careful since folding is more stressful than common games so you would have to ensure that it is stable across all assigned Projects (different projects can have varying amounts of stress on the GPU).
May 12, 2014, 07:02:20 AM
I dont like the fact that this is a very interesting project yet the lead dev ignores my question about absolutely awfull exchange. Why should we trade curecoins on some tier 5 exchange?
Please get yourself some respect and get curecoin to some renowned exchanges. Greed is great motivation for people to actually start helping. And there wont be any money value without the bigger and proven exchanges.
Or do you own that exchange and promote yourself?
My team is already contacting exchanges and a few exchanges have already contacted me on their own accord. Please allow more than 24 hours for my coin to be placed somewhere famous like cryptsy.
I don't own scifi exchange
cool
I did not want to sound negative...its just that everything looks profi and that exchange is killing it :p
May 12, 2014, 07:01:00 AM
Started folding yesterday but my 2 280x's and 1 I5 are only giving me about 95000 ppd in total.
Any tips on how to improve the ppd?
Try pauzing your cpu. Might be that due fact that your using cpu to fold, gpus not getting the workload they should.Any tips on how to improve the ppd?
Try :Update to catalyst 14.x (but be warned... can up ppd 20%.. can also be buggy and cause you to loose work.. had to learn that myself the hard way =))
Also, can always overclock your cards... Since folding will be less stress / heat on the cards so could push m a bit further then usual when mining
Also wanted to state again.. for the complainers about the exchange... there's no school like old school :
buy & sell thread : https://bitcointalksearch.org/topic/curecoin-buy-and-sell-your-curecoins-here-605734
What would be the optimal engine/memclock settings according to you?
If you search the official folding forums you will see the same answer many times, the F@H software detects your exact type of gpu and factory setting are best. Unlike normal mining where overclocking causes a few hardware errors that do not matter, in the folding world that one little error can mess up the entire work unit. I would go with what the folding pros say and use factory settings to ensure your WU's are not corrupted. If you insist on trying to overclock you will want to do some searching regarding your exact model of card with folding @ home to see if it can be overclocked any without errors.
Ah, ok. Just asking since my GPU's are still netting 45kppd each where they should give me around 100k ppd each (According to others.)
If you were folding for a while with your cpu going you probably lost some potential QRB ( quick return bonus ), when those WU's finish the next set you get should get you about 100k ppd per card.
May 12, 2014, 06:59:11 AM
Started folding yesterday but my 2 280x's and 1 I5 are only giving me about 95000 ppd in total.
Any tips on how to improve the ppd?
Try pauzing your cpu. Might be that due fact that your using cpu to fold, gpus not getting the workload they should.Any tips on how to improve the ppd?
Try :Update to catalyst 14.x (but be warned... can up ppd 20%.. can also be buggy and cause you to loose work.. had to learn that myself the hard way =))
Also, can always overclock your cards... Since folding will be less stress / heat on the cards so could push m a bit further then usual when mining
Also wanted to state again.. for the complainers about the exchange... there's no school like old school :
buy & sell thread : https://bitcointalksearch.org/topic/curecoin-buy-and-sell-your-curecoins-here-605734
What would be the optimal engine/memclock settings according to you?
If you search the official folding forums you will see the same answer many times, the F@H software detects your exact type of gpu and factory setting are best. Unlike normal mining where overclocking causes a few hardware errors that do not matter, in the folding world that one little error can mess up the entire work unit. I would go with what the folding pros say and use factory settings to ensure your WU's are not corrupted. If you insist on trying to overclock you will want to do some searching regarding your exact model of card with folding @ home to see if it can be overclocked any without errors.
How can I tell if my WUs are corrupted?
May 12, 2014, 06:58:30 AM
Whats the difference between a mining pool and a folding pool ?
The mining pool is built for the best suited hardware, the ASIC, which does SHA algo mining to secure the blockchain. The folding pool is what rewards you for for folding work units that can help scientists solve cures for diseases of many types, including cancer. GPU's and CPU's are best for these operations. GPU being the better option due to the parallel computing abilities associated with have 1000's of cores. Please refer to the how to fold guide in the OP to learn more about folding to earn Curecoins.
Thanks,
Already folding..
So mining contribute nothing besides some coins to trade ?
It helps to secure the block chain also, which is an important part in a crypto currency. That being said, since the folding fund is premined and the coin is pow/pos hybrid, its unlikely to fall to a 51% attack.
May 12, 2014, 06:55:13 AM
Started folding yesterday but my 2 280x's and 1 I5 are only giving me about 95000 ppd in total.
Any tips on how to improve the ppd?
Try pauzing your cpu. Might be that due fact that your using cpu to fold, gpus not getting the workload they should.Any tips on how to improve the ppd?
Try :Update to catalyst 14.x (but be warned... can up ppd 20%.. can also be buggy and cause you to loose work.. had to learn that myself the hard way =))
Also, can always overclock your cards... Since folding will be less stress / heat on the cards so could push m a bit further then usual when mining
Also wanted to state again.. for the complainers about the exchange... there's no school like old school :
buy & sell thread : https://bitcointalksearch.org/topic/curecoin-buy-and-sell-your-curecoins-here-605734
What would be the optimal engine/memclock settings according to you?
If you search the official folding forums you will see the same answer many times, the F@H software detects your exact type of gpu and factory setting are best. Unlike normal mining where overclocking causes a few hardware errors that do not matter, in the folding world that one little error can mess up the entire work unit. I would go with what the folding pros say and use factory settings to ensure your WU's are not corrupted. If you insist on trying to overclock you will want to do some searching regarding your exact model of card with folding @ home to see if it can be overclocked any without errors.
Ah, ok. Just asking since my GPU's are still netting 45kppd each where they should give me around 100k ppd each (According to others.)
May 12, 2014, 06:50:13 AM
Started folding yesterday but my 2 280x's and 1 I5 are only giving me about 95000 ppd in total.
Any tips on how to improve the ppd?
Try pauzing your cpu. Might be that due fact that your using cpu to fold, gpus not getting the workload they should.Any tips on how to improve the ppd?
Try :Update to catalyst 14.x (but be warned... can up ppd 20%.. can also be buggy and cause you to loose work.. had to learn that myself the hard way =))
Also, can always overclock your cards... Since folding will be less stress / heat on the cards so could push m a bit further then usual when mining
Also wanted to state again.. for the complainers about the exchange... there's no school like old school :
buy & sell thread : https://bitcointalksearch.org/topic/curecoin-buy-and-sell-your-curecoins-here-605734
What would be the optimal engine/memclock settings according to you?
If you search the official folding forums you will see the same answer many times, the F@H software detects your exact type of gpu and factory setting are best. Unlike normal mining where overclocking causes a few hardware errors that do not matter, in the folding world that one little error can mess up the entire work unit. I would go with what the folding pros say and use factory settings to ensure your WU's are not corrupted. If you insist on trying to overclock you will want to do some searching regarding your exact model of card with folding @ home to see if it can be overclocked any without errors.
May 12, 2014, 06:45:04 AM
Started folding yesterday but my 2 280x's and 1 I5 are only giving me about 95000 ppd in total.
Any tips on how to improve the ppd?
Any tips on how to improve the ppd?
Looks like someone beat me to a good answer , nice take on "there's no school like old school". Thanks for posting a trading thread, truly old school, brings me back to the early days of alt coins
+1 meelvanchrisStarted folding yesterday but my 2 280x's and 1 I5 are only giving me about 95000 ppd in total.
Any tips on how to improve the ppd?
Try pauzing your cpu. Might be that due fact that your using cpu to fold, gpus not getting the workload they should.Any tips on how to improve the ppd?
Try :Update to catalyst 14.x (but be warned... can up ppd 20%.. can also be buggy and cause you to loose work.. had to learn that myself the hard way =))
Also, can always overclock your cards... Since folding will be less stress / heat on the cards so could push m a bit further then usual when mining
Also wanted to state again.. for the complainers about the exchange... there's no school like old school :
buy & sell thread : https://bitcointalksearch.org/topic/curecoin-buy-and-sell-your-curecoins-here-605734
May 12, 2014, 06:44:31 AM
Started folding yesterday but my 2 280x's and 1 I5 are only giving me about 95000 ppd in total.
Any tips on how to improve the ppd?
Try pauzing your cpu. Might be that due fact that your using cpu to fold, gpus not getting the workload they should.Any tips on how to improve the ppd?
Try :Update to catalyst 14.x (but be warned... can up ppd 20%.. can also be buggy and cause you to loose work.. had to learn that myself the hard way =))
Also, can always overclock your cards... Since folding will be less stress / heat on the cards so could push m a bit further then usual when mining
Also wanted to state again.. for the complainers about the exchange... there's no school like old school :
buy & sell thread : https://bitcointalksearch.org/topic/curecoin-buy-and-sell-your-curecoins-here-605734
What would be the optimal engine/memclock settings according to you?
May 12, 2014, 06:39:35 AM
Started folding yesterday but my 2 280x's and 1 I5 are only giving me about 95000 ppd in total.
Any tips on how to improve the ppd?
Try pauzing your cpu. Might be that due fact that your using cpu to fold, gpus not getting the workload they should.Any tips on how to improve the ppd?
Try :Update to catalyst 14.x (but be warned... can up ppd 20%.. can also be buggy and cause you to loose work.. had to learn that myself the hard way =))
Also, can always overclock your cards... Since folding will be less stress / heat on the cards so could push m a bit further then usual when mining
Also wanted to state again.. for the complainers about the exchange... there's no school like old school :
buy & sell thread : https://bitcointalksearch.org/topic/curecoin-buy-and-sell-your-curecoins-here-605734
May 12, 2014, 06:39:24 AM
Hi!This is very interesting project.I started folging today,but i don't see my work in folding pool,and I can't see me in this sheet -http://fah-web2.stanford.edu/teamstats/team224497.html
Will I see my work next day,or I made something wrong?
Or I need to wait for work progress is 100%?
Will I see my work next day,or I made something wrong?
Or I need to wait for work progress is 100%?
Progress must hit 100% and be successfully uploaded to the collection server. Then allow about an hour or two before you see points here http://fah-web2.stanford.edu/teamstats/team224497.html
It then takes about 24 hours for those points to transfer to https://cryptobullionpools.com
May 12, 2014, 06:36:11 AM
Hey cygnusxi,
what is the max amount of coins to be produced ??
what is the max amount of coins to be produced ??
Max coins approx ~28692524.3220615
Link also in OP
https://docs.google.com/spreadsheet/ccc?key=0AvPoRrj3QF5sdGlxUzdKVVgyaWZvZGlaT195OEFKZmc&usp=sharing
Obviously the extra decimals can be ignored, this is just the math we used to put the coin base together.
Jump to: