Topic: |ANN| DAS - Decentralized and Secure. Private Send. Masternodes. - page 85. (Read 153952 times)

Thanks for the updated MN guide.

This is where I am running into trouble:

"dasd -daemon

das-cli getinfo

or

./das-cli getinfo

its not running? i changed some lines up there without testing xD
try to launch it like this ./dasd -daemon"


All 4 of those commands give two errors.  I'm not proficient in Linux so I"m following the guide to the tee.  I'm assuming that the last command ./dasd -daemon is the correct one.  

I am getting this:  

./dasd:  line 7:  syntax error near unexpected token 'newline'
./dasd:  line 7:  `'

I don't know how it thinks the document type is HTML . . or maybe that isn't what that error means.  Any assistance would be appreciated.  

yes
and 3,4,5,20.....

I had to close and restart a couple times, then it synced up.  Now it seems to be working just fine. 

Polylogic that was a very thorough guide for how to run a masternode. Could you please set up a guide for how to sync the windows wallet. Mine will not sync and I cannot for the life of me figure out how to sync it.

Hello,

Is it possible to run 2 Linux MN with 1 windows wallet?

Thanks.

@polylogic awesome guide work, very impressive

use 1 wallet for each masternode and use different rpcport for each wallet

dont really understand how in 2017 x11 still poping up ? Lazy devs who are only now catching up ? I dont see any unique ability of this coin neither industry this will enter.

Best case scenario that some CHC hype happens again on this coin or something as I really find it hard how and when this project could possibly succeed, especially with one man team...

P.S. At least its not an ICO

any one managed to run more than one masternode on windows local ?  need help please cant start the next masternode

I'm sure the dev is working very hard, but any recent updates from him?

I am getting a similar error. Any update on the situation?

I decided to compile my own by following part 03.2.

here is the error after the command "./configure".

this is the ending part :

configure: WARNING: Qt dependencies not found; das-qt frontend will not be built
checking whether to build Das Core GUI... no (Qt5)
checking for boostlib >= 1.20.0... configure: We could not detect the boost libr                 aries (version 1.20 or higher). If you have a staged boost library (still not in                 stalled) please specify $BOOST_ROOT in your environment and do not give a PATH t                 o --with-boost option.  If you are sure you have boost installed, then check you                 r version number looking in . See http://randspringer.de/boos                 t for more documentation.
checking whether the Boost::System library is available... no
checking whether the Boost::Filesystem library is available... no
checking whether the Boost::Program_Options library is available... no
checking whether the Boost::Thread library is available... no
checking whether the Boost::Chrono library is available... no
checking whether the Boost::Unit_Test_Framework library is available... no
checking for dynamic linked boost test... no
configure: error: No working boost sleep implementation found.



anyone has the same error ?

@polylogic Thanks for the great instructions.

I chose the lazy route (part 03.1) and encounter an error after ./dasd -daemon

das@vultr:~$ ./dasd -daemon
./dasd: line 7: syntax error near unexpected token `newline'
./dasd: line 7: `'


any idea ??


TIA

yes the transaction with your exactly 1000 das need 15 confirmation

I can confirm that if your WiFi is not stable, running a MN is no fun!

thanks, it should work, maybe you will run into some problems with dependencies, ive read it somewhere



you can use wifi, but make sure it is stable

Dear Forum readers,

I have a Windows  masternode related question :

Can I use a WIFI connected Windows PC as masternode or it must be connected to the internet via LAN ethernet cable ?


Thanks in advance for your help.

Happy staking.

 

Great work Polylogic!!! Really good guide!
Can i also set up my MN with this guide on a Ubuntu 14.04 OS?

Polylogic - DAS - Masternode Guide - Windows/Linux Cold Wallet + Ubuntu 16.x VPS Masternode LINK

Part 01

---

Lets prepare the Cold Storage (this should work with any OS)

---

- Install the (Windows) Wallet and sync with Network
- Send 1000.01 DAS from Exchange to your 0 address (send 0.01 DAS more than nessesary because of fees)
- Encrypt Wallet with Strong Password
- Backup Wallet.dat File
- Open Debug Console and type without ":
- Save the Private Key to a txt file and type:
- This is your Masternode Key, save it aswell.
- Save This Data too. Its your Transaction ID and IDX. We need all those keys later.
- now backup your wallet.dat

if you want to manage 2+ masternodes you have to:
 - close the wallet delete the wallet .dat in /%appdata%/.das/
 - open wallet and a you will get new address 0
 - repeat the first steps of the tutorial.
 - now import the old address 0 by typing "importprivkey
 - this part of the tutorial is still incomlete, to be continued but all the important steps are here xD

Part 02

---

Prepare the Linux VPS (Ubuntu 16.x)

---

WARNING - WARNING - WARNING - WARNING - WARNING - WARNING

if you dont know how to operate a Linux Server,
then you should think twice about setting up a Masternode Server.
Masternodes have a Public IP Address and may be subject to Intruders and Hacking attemts.
We have to properly secure the server and keep it updated.
For now, this Tutorial will provide you with a basic security but it is highly advised to
take the proper precautions and stay alert.

i will update this guide to my best knowlege, maybe one of you can give some iptables tips
and how we get fail2ban goin.

WARNING - WARNING - WARNING - WARNING - WARNING - WARNING

if you dont know what you are doing and still want to participate just copy paste the commands.

- log into your vps via ssh (i use putty)

- now we change the ssh port to some number you like
change the port from 22 to your lucky number.
if you have never worked with nano:
look at the bottom, it shows the menu, press CTRL + X to Exit & Save

- restart the ssh service

- now disconnect and log back in, use your new port.

- lets setup the firewall and open ports for ssh and DAS (Port 9399)

enable the firewall:

use _{ufw status} and _{ufw disable} if you need to disable the firewall.

- reboot the vps and log back in.

- check the internet on how to secure your vps, there is still much to learn.


Part 03

---

Install DAS

---

WARNING - WARNING - WARNING - WARNING - WARNING - WARNING

there are currently two ways to install DAS.
build the application from source-code or use a already build and compiled version.
the only available build is by a community member and you should know that he could have changed some code.
i am going to trust whywefight that he didnt.
but normaly you should never trust a compiled version by a 3rd Party, especially in the crypto scene.

i will also you provide with the steps to build DAS from Source yourself,
this maybe doesnt work, if you dont complie things on a daily basis you forget stuff like that.
feel free to provide us with the correct steps.

WARNING - WARNING - WARNING - WARNING - WARNING - WARNING


you only need to do one of those two steps:

Part 03.1

---

Install and launch DAS by downloading the Build:

---

 - you should be logged into your vps as root


this is it. now DAS is running, started by user das.
verify that DAS is connected with:

its not running? i changed some lines up there without testing xD
try to launch it like this _{./dasd -daemon}



Part 03.2

---

Install and launch DAS by building the source:

---

for more information check the wiki


this may take a while, grab some tea.



and launch:

either way you got DAS synced and running...


Part 04

---

Enable masternode and point it to our wallet:

---

we now edit the configuration file, copy paste the following, edit with your data and save.

we are almost done, all we need to do now is start DAS again.


Part 05

---

BTCBTCBTC Start the Masternode-Service and earn DAS! BTCBTCBTC

---

congratulations, you have come a long way, now its time to earn some money

The last step has to be done with the Cold Wallet,
edit the masternode config and add:

now restart the wallet to load the config file.
unlock wallet
enter debug console


this is it, simple right?
your masternode is running and earning 24/7.
you can close the wallet or keep it open and synced.
Windows 10 gives you Notifications on Incomming Transactions.

here are some more tips:

Cold Wallet:
- use the debug console, try _help or _{help masternode}
- take a look at the masternode list and look up your Transactions ID with _{masternode list} you can also see the status there.

VPS Masternode:
try _{masternode status} once everything has been done to verify your node working.


sit back, enjoy and donate some DAS

---

i am goin to add some credits later

Would appreciate that, too. Would be very helpful!