Fee 1% / Payout interval: 30 min
Code:
-o stratum+tcp://steeppool.com:4233 -u-p c=HAL
Telegramm Live Chat: @steppool
Forum topic: BitcoinTalk
Topic: [ANN] Halcyon v1.1.0.2 ~ NeoScrypt PoW and up to 100% PoS - page 7. (Read 73471 times)
Fee 1% / Payout interval: 30 min
Telegramm Live Chat: @steppool
Forum topic: BitcoinTalk
I cannot solo mine.
I rearrange the conf file and i got connected to the network.
But no hashes ... and if i mine in the pool, the funds don't raise.
What i can do ??
Thanks !!
Only this is appearing in the miner (ccminer neoscrypt win 1.5.80)
[2017-12-27 14:21:40] Binding thread 0 to cpu 0 (mask 1)
[2017-12-27 14:22:42] GPU #0: GeForce GTX 1060 3GB, 592
[2017-12-27 14:22:47] GPU #0: GeForce GTX 1060 3GB, 595
[2017-12-27 14:22:52] GPU #0: GeForce GTX 1060 3GB, 592
I rearrange the conf file and i got connected to the network.
But no hashes ... and if i mine in the pool, the funds don't raise.
What i can do ??
Thanks !!
Only this is appearing in the miner (ccminer neoscrypt win 1.5.80)
[2017-12-27 14:21:40] Binding thread 0 to cpu 0 (mask 1)
[2017-12-27 14:22:42] GPU #0: GeForce GTX 1060 3GB, 592
[2017-12-27 14:22:47] GPU #0: GeForce GTX 1060 3GB, 595
[2017-12-27 14:22:52] GPU #0: GeForce GTX 1060 3GB, 592
Use NSGminer for now, it's better than an old CCminer.
Well, except when it isn't. On linux with cuda8 at least, your own ccminer-neoscrypt 1.5.80 is still better than nsgminer 0.9.4 by 35% (djm34 1.5.79 is best by ~50% over nsgminer). I even tested them with 1060 3GB cards too...
Not picking a fight, man! Just pointing out some real-world numbers. I doubt the windows versions are significantly different, maybe a few percent here or there...
I cannot solo mine.
I rearrange the conf file and i got connected to the network.
But no hashes ... and if i mine in the pool, the funds don't raise.
What i can do ??
Thanks !!
Only this is appearing in the miner (ccminer neoscrypt win 1.5.80)
[2017-12-27 14:21:40] Binding thread 0 to cpu 0 (mask 1)
[2017-12-27 14:22:42] GPU #0: GeForce GTX 1060 3GB, 592
[2017-12-27 14:22:47] GPU #0: GeForce GTX 1060 3GB, 595
[2017-12-27 14:22:52] GPU #0: GeForce GTX 1060 3GB, 592
I rearrange the conf file and i got connected to the network.
But no hashes ... and if i mine in the pool, the funds don't raise.
What i can do ??
Thanks !!
Only this is appearing in the miner (ccminer neoscrypt win 1.5.80)
[2017-12-27 14:21:40] Binding thread 0 to cpu 0 (mask 1)
[2017-12-27 14:22:42] GPU #0: GeForce GTX 1060 3GB, 592
[2017-12-27 14:22:47] GPU #0: GeForce GTX 1060 3GB, 595
[2017-12-27 14:22:52] GPU #0: GeForce GTX 1060 3GB, 592
Use NSGminer for now, it's better than an old CCminer.
Ok Ghost, the lastes version is 0.9.4 ??
I realize that i've that miner, i'll look here in dl section.
I'll edit here, ok ?
@Edit²
Man, i think i get it !!
[17:37:41] Detected a new block 0x0434C82824DA4181
I cannot solo mine.
I rearrange the conf file and i got connected to the network.
But no hashes ... and if i mine in the pool, the funds don't raise.
What i can do ??
Thanks !!
Only this is appearing in the miner (ccminer neoscrypt win 1.5.80)
[2017-12-27 14:21:40] Binding thread 0 to cpu 0 (mask 1)
[2017-12-27 14:22:42] GPU #0: GeForce GTX 1060 3GB, 592
[2017-12-27 14:22:47] GPU #0: GeForce GTX 1060 3GB, 595
[2017-12-27 14:22:52] GPU #0: GeForce GTX 1060 3GB, 592
I rearrange the conf file and i got connected to the network.
But no hashes ... and if i mine in the pool, the funds don't raise.
What i can do ??
Thanks !!
Only this is appearing in the miner (ccminer neoscrypt win 1.5.80)
[2017-12-27 14:21:40] Binding thread 0 to cpu 0 (mask 1)
[2017-12-27 14:22:42] GPU #0: GeForce GTX 1060 3GB, 592
[2017-12-27 14:22:47] GPU #0: GeForce GTX 1060 3GB, 595
[2017-12-27 14:22:52] GPU #0: GeForce GTX 1060 3GB, 592
Use NSGminer for now, it's better than an old CCminer.
I cannot solo mine.
I rearrange the conf file and i got connected to the network.
But no hashes ... and if i mine in the pool, the funds don't raise.
What i can do ??
Thanks !!
Only this is appearing in the miner (ccminer neoscrypt win 1.5.80)
[2017-12-27 14:21:40] Binding thread 0 to cpu 0 (mask 1)
[2017-12-27 14:22:42] GPU #0: GeForce GTX 1060 3GB, 592
[2017-12-27 14:22:47] GPU #0: GeForce GTX 1060 3GB, 595
[2017-12-27 14:22:52] GPU #0: GeForce GTX 1060 3GB, 592
I rearrange the conf file and i got connected to the network.
But no hashes ... and if i mine in the pool, the funds don't raise.
What i can do ??
Thanks !!
Only this is appearing in the miner (ccminer neoscrypt win 1.5.80)
[2017-12-27 14:21:40] Binding thread 0 to cpu 0 (mask 1)
[2017-12-27 14:22:42] GPU #0: GeForce GTX 1060 3GB, 592
[2017-12-27 14:22:47] GPU #0: GeForce GTX 1060 3GB, 595
[2017-12-27 14:22:52] GPU #0: GeForce GTX 1060 3GB, 592
Prices on the floor are quite impressive 0.00000370BTC
It's low volume and I don't see a point in selling below 1000 sats. I better wait and keep staking.
Prices on the floor are quite impressive 0.00000370BTC
should we not just glue this and pxc together so the dev can work on one new outstanding project with a chance of getting noticed and taken to the top 100?
There is new pool:
http://hashpool.eu
http://hashpool.eu
Looks interesting worth a check
Guys, you can check the profitability of the coin at https://www.crypto-coinz.net/crypto-calculator/
100% PoS? How many coins are needed for having a daily stake?
80% PoS, 20% PoW. Interest depends on difficulty. For daily stake, a couple thousand coins or so, split into parts of a hundred coins each.
100% PoS? How many coins are needed for having a daily stake?
🛠 NEW MINING POOL ADDED - OVER 1.000 MINERS 🛠
https://altminer.net
Low latency, scalable and secure mining pool infrastructure
Automatic payouts every 120 minutes
No registration required
Low latency, scalable and secure mining pool infrastructure
Automatic payouts every 120 minutes
No registration required
▶️▶️▶️ How to mine❓
Use the following parameters at your preferred mining software (replace WALLET with your wallet address):
Code:
-a neoscrypt -o stratum+tcp://eu1.altminer.net:4233 -u WALLET -p c=HAL
▶️▶️▶️ How to use a different difficulty❓
You can use the parameter d=? in your password to set the desired difficulty, good for NiceHash etc.
Code:
-a neoscrypt -o stratum+tcp://eu1.altminer.net:4233 -u WALLET -p c=HAL,d=8
▶️▶️▶️ Coininfo
https://altminer.net/info/HAL
▶️▶️▶️ Explorer
https://altminer.net/explorer/HAL
▶️▶️▶️ Nodelist
https://altminer.net/explorer/peers?id=500
▶️▶️▶️ Benchmarks and tuning settings
https://altminer.net/bench?algo=neoscrypt
Hi guys,
I am pleased to announce that HALCYON has been added to https://www.crypto-coinz.net and from now on you will be able to see the Global Hash Rate and Difficulty of the coin and to calculate your Profitability.
If you have any other issues with using the calculator or site please let me know.
I am pleased to announce that HALCYON has been added to https://www.crypto-coinz.net and from now on you will be able to see the Global Hash Rate and Difficulty of the coin and to calculate your Profitability.
If you have any other issues with using the calculator or site please let me know.
This coin is just a joke right? How will you have a yield of 100% per year on the POS system? How do you intend to sustain this and avoid devaluation?
It's up to 100% per year. Depends on difficulty. The issue rate cannot exceed 5 coins per block. 1 PoS block every 2.5 minutes. You do the math.
This seems interesting, thinking about joining the project.
Hello HALCYON team,
I'm happy to announce that your coin has been listed to ItalYiiMP 2.0 for mining,
to get paid in HAL just set c=HAL as password in your configuration.
visit italyiimp.com.
best regards.
bitfawkes
I'm happy to announce that your coin has been listed to ItalYiiMP 2.0 for mining,
to get paid in HAL just set c=HAL as password in your configuration.
visit italyiimp.com.
best regards.
bitfawkes
Right now, at what stage is your project?
Wow! Very informative wp, good description
Jump to: