Topic: [ANN] [MINT] Mintcoin (POS / 5%) [NO ICO] [Fair distro, community maintained] - page 107. (Read 1369788 times)

addnodes in the conf file are largely un-needed UNLESS you somehow cannot initiate DNS queries from your computer (very rare, and you'd know if this was the case).

Your wallet is likely verifying a large chunk of received blocks before continuing to download new ones. During this time it'll see that new blocks are being created, hence the increase in number of blocks to download.

That is just one of the great things I like about Mintcoin. It is very fast, scalable, fungible, energy efficient.

IDK about 1600 right now, I think maybe about 140 is the current limit. I we could get up to 1600 if we increased the block size though, which we could do, but I don't think it is necessary at this point though. We are not anywhere near that transaction level right now, we would need to be an order of magnitude higher than the level of transactions on the Bitcoin network currently is to even worry about it. Already the way it is, Mintcoin has the ability to do about 20x the transaction volume as Bitcoin.

Is there a way someone can "stress test" the Mintcoin network to see how many transactions per second it can handle? Some people are wanting to see proof of what it can do. Like a video and evidence on the block explorer. In another thread I mentioned that Mintcoin is able to do up to 1600 transactions per second, which means it is about the most scalable crypto-coin existing right now. But I don't know how to test this. Does anyone know how we could test something like that? Part of the problem I see with even trying to test it, is Mintcoin requires a 0.1 MINT fee for every transaction.

The scalability of Mintcoin is one of the reasons I have invested in it. I think it is great! I just want to be able to show proof to others of what it can do. People need to know what Mintcoin is capable of. The transaction capacity is a major issue with Bitcoin right now, so to prove MINT superior in this aspect would be nice to demonstrate.

I'm on Widows 7 64 bit
I don't use a .conf file at all.

if it looks like it's stuck, check in your mintcoin folder and see if the blockchain file is still getting bigger every few seconds, then you know it is still updating. The GUI will catch up later. That has been my experience anyway.

Download the bootstrap from http://www.mintcoinofficial.com/

I added all these nodes to my config file

addnode=113.135.133.39
addnode=115.28.140.128
addnode=62.233.34.246
addnode=162.243.35.172
addnode=88.164.227.110
addnode=176.14.145.130
addnode=125.39.130.15
addnode=123.53.221.104
addnode=198.144.159.39
addnode=184.75.214.42
addnode=113.69.22.36
addnode=86.26.190.235
addnode=153.19.215.115
addnode=115.28.134.205
addnode=223.152.73.253
addnode=122.178.204.154
addnode=115.28.162.160
addnode=81.108.157.78
addnode=180.112.221.68
addnode=120.144.87.195
addnode=31.53.158.152
addnode=50.102.222.206
addnode=60.182.177.105
addnode=217.118.83.145
addnode=119.119.151.106
addnode=218.77.97.176
addnode=182.112.134.112
addnode=106.68.126.251
addnode=195.38.122.80
addnode=162.243.4.85
addnode=62.221.120.216
addnode=49.66.59.73
addnode=124.168.123.204
addnode=223.198.48.85
addnode=162.223.48.19
addnode=212.247.109.253
addnode=188.162.40.67
addnode=24.49.13.97
addnode=203.208.83.100
addnode=91.2.7.117
addnode=80.123.21.76
addnode=14.148.0.173
addnode=64.58.130.180
addnode=89.168.237.30
addnode=122.224.95.209
addnode=182.112.134.112
addnode=95.89.180.80
addnode=77.254.241.222
addnode=92.13.231.33

but I still cannot sync. I'm connected to ten nodes so it doesn't look like a node issue. Mintcoin is running 50% of my cpu power but  remaining blocks to sync are even growing  (are 5581 now) because my wallet is not confirming anything

Mint lack of more applications


[
{
"addr" : "62.203.178.91:12788",
"services" : "00000001",
"lastsend" : 1443355499,
"lastrecv" : 1443355517,
"conntime" : 1443345897,
"version" : 60007,
"subver" : "/MintCoin:0.7.2/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 1917011,
"banscore" : 0
},
{
"addr" : "86.21.96.45:12788",
"services" : "00000001",
"lastsend" : 1443355456,
"lastrecv" : 1443355522,
"conntime" : 1443345920,
"version" : 60007,
"subver" : "/MintCoin:0.7.2/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 1917011,
"banscore" : 0
},
{
"addr" : "95.76.145.187:12788",
"services" : "00000001",
"lastsend" : 1443355382,
"lastrecv" : 1443355519,
"conntime" : 1443345943,
"version" : 60007,
"subver" : "/MintCoin:0.7.2/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 1917012,
"banscore" : 0
},
{
"addr" : "184.100.120.147:12788",
"services" : "00000001",
"lastsend" : 1443355465,
"lastrecv" : 1443355516,
"conntime" : 1443345943,
"version" : 60007,
"subver" : "/MintCoin:0.7.2/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 1917012,
"banscore" : 0
},
{
"addr" : "24.77.217.46:12788",
"services" : "00000001",
"lastsend" : 1443354974,
"lastrecv" : 1443355496,
"conntime" : 1443346128,
"version" : 60007,
"subver" : "/MintCoin:0.7.2/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 1917017,
"banscore" : 0
},
{
"addr" : "201.43.239.138:12788",
"services" : "00000001",
"lastsend" : 1443355454,
"lastrecv" : 1443355518,
"conntime" : 1443346145,
"version" : 60007,
"subver" : "/MintCoin:0.7.2/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 1917017,
"banscore" : 0
},
{
"addr" : "96.33.146.182:12788",
"services" : "00000001",
"lastsend" : 1443355454,
"lastrecv" : 1443355519,
"conntime" : 1443346700,
"version" : 60007,
"subver" : "/MintCoin:0.7.2/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 1917041,
"banscore" : 0
},
{
"addr" : "184.164.191.103:12788",
"services" : "00000001",
"lastsend" : 1443355334,
"lastrecv" : 1443355518,
"conntime" : 1443347170,
"version" : 60007,
"subver" : "/MintCoin:0.7.2/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 1917058,
"banscore" : 0
},
{
"addr" : "73.235.53.110:12788",
"services" : "00000001",
"lastsend" : 1443354838,
"lastrecv" : 1443354838,
"conntime" : 1443347630,
"version" : 60007,
"subver" : "/MintCoin:0.7.2/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 1746227,
"banscore" : 0
},
{
"addr" : "109.51.189.141:12788",
"services" : "00000001",
"lastsend" : 1443355214,
"lastrecv" : 1443355515,
"conntime" : 1443348774,
"version" : 60007,
"subver" : "/MintCoin:0.7.2/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 1917108,
"banscore" : 0
},
{
"addr" : "198.50.243.84:12788",
"services" : "00000001",
"lastsend" : 1443355486,
"lastrecv" : 1443355515,
"conntime" : 1443349888,
"version" : 60007,
"subver" : "/MintCoin:0.7.2/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 1917143,
"banscore" : 0
},
{
"addr" : "176.37.23.74:12788",
"services" : "00000001",
"lastsend" : 1443355515,
"lastrecv" : 1443355515,
"conntime" : 1443354041,
"version" : 60007,
"subver" : "/MintCoin:0.7.2/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 1917283,
"banscore" : 0
}
]

post getpeerinfo

1)2.0.0.1
2)win 7 64 bit
3)last 2 rows are "getblocks 1574924 to f525efc7a5eec817156e limit 500
  getblocks stopping at 1574960 f525efc7a5eec817156e"
4)1912290 received 6 hours ago.

What version? What OS? What is shown in the debug.log file? What is the last block number and date you have?

My wallet doesn't sync. Stuck with 4768 blocks remaining. wallet is using 760mb ram and 30% cpu power then I think it's working
Do I need more nodes in config file?

I will be porting MultiSend over to XRA within the next few days. You can see that commit for inspiration

Donation sent. Not much but something, i hope other will do the same.

https://chainz.cryptoid.info/mint/tx.dws?7b2f698ec432c7e1a9e25dfa740e288a19f4bb856ca8374da8978e982bdf2782.htm

@cryptomommy
Please check you PM.

Thanks for the support.

Recurring Send is something that is on my list of things to look at, but will not be changed for this upcoming release. There are some fundamental limits to the Recurring Send feature that make it mutually exclusive with Coin Control (something that I personally enable on every PoS coin). It makes sense though, If a user wants the refined level of control that Coin Control offers, having an automated system come in and arbitrarily interfere with that could introduce some pretty unwanted results.

Sending a % of one's stake to another address is pretty much what some other coins label as "MultiSend" and it too is on my list of things that can be added to Mint.

Just minted some coins, will send 10% to devs. Thanks for the active development

EDIT: is it possible to provide an option in recurring send that sends a % of minted coins whenever i mint instead of days. It will be great to share my minted coins with devs automatically.

Next release will probably be a bit more than a couple days away. Supasonic and myself have been working on it and while the GUI overhaul is pretty much done, the under-the-hood updates require a bit more time.

Just here to remind everyone. Please keep donating to devs & block explorer. Dev wallet is empty & block explorer has only 44 days left. although one positive thing is

I think it is a matter of a few days.