Topic: [ANN] NiceHash.com - sell & buy hash rate cloud mining service / multipool - page 175. (Read 794394 times)
June 10, 2015, 10:46:56 AM
adress for titan for wh?
June 10, 2015, 10:46:11 AM
why 2 days now
scypt pool
for titans
is awful?
low speed
and connect
and disconnect at pool
scypt pool
for titans
is awful?
low speed
and connect
and disconnect at pool
We are working on some performance improvements and trying to solve a bug. You can use WH for the time being until this is over.
June 10, 2015, 10:41:41 AM
why 2 days now
scypt pool
for titans
is awful?
low speed
and connect
and disconnect at pool
scypt pool
for titans
is awful?
low speed
and connect
and disconnect at pool
June 10, 2015, 01:14:10 AM
@nicehash can u clear something for me ?
Sorry for my english.
I bought a ticket in "Blockchain Lottery" about 15 hours ago in westhash pool. it opened a 500th speed in solo.nicehash with my chunk nicehash address: 3Q4ASpeFwSCvNpcFLGNr4tDgq41epCWqkx
https://solo.nicehash.com/bitcoin/user/3Q4ASpeFwSCvNpcFLGNr4tDgq41epCWqkx.htm
If you look in pool graph state in solo.nicehash i was the only one with big hashrate about 12 hours. when i was hashing a block found by pool. with this bitcoin address: 1PN9XH9pPXtYHeupDAiFeFrkgXiwKZVUVe
but there is no clue in the pool that shows this address was mining:
https://solo.nicehash.com/bitcoin/user/1PN9XH9pPXtYHeupDAiFeFrkgXiwKZVUVe.htm NOT FOUND!
what happened?
Sorry for my english.
I bought a ticket in "Blockchain Lottery" about 15 hours ago in westhash pool. it opened a 500th speed in solo.nicehash with my chunk nicehash address: 3Q4ASpeFwSCvNpcFLGNr4tDgq41epCWqkx
https://solo.nicehash.com/bitcoin/user/3Q4ASpeFwSCvNpcFLGNr4tDgq41epCWqkx.htm
If you look in pool graph state in solo.nicehash i was the only one with big hashrate about 12 hours. when i was hashing a block found by pool. with this bitcoin address: 1PN9XH9pPXtYHeupDAiFeFrkgXiwKZVUVe
but there is no clue in the pool that shows this address was mining:
https://solo.nicehash.com/bitcoin/user/1PN9XH9pPXtYHeupDAiFeFrkgXiwKZVUVe.htm NOT FOUND!
what happened?
June 09, 2015, 07:30:21 PM
@nicehash I decided to switch to the new urls all of which seemed to be working just fine until I checked my account on your website, my rigs were mining x11 yet my x11 hashrate showed 0.00 on your website and my bitcoins were not increasing. I immediately switched back to the "old" urls and my hashrate instantly appeared. Anybody using the new urls may want to check to see that your hashrate is showing up on the website because my rigs connected and were mining just fine, I just wasn't being paid for it.
June 09, 2015, 12:31:24 PM
what you mean with "order"
i'm a miner, not rented or something
just mining on, i think my miner working but stuck on progress, when i look for it than restarting miner and work lke usually
now i just setup my miner auto restart in 30 minutes to avoid that (stuck on minng process)
sometimes server get loss or disconneted at all, if miner not auto restart than will stuck if we not restart it
i'm a miner, not rented or something
just mining on, i think my miner working but stuck on progress, when i look for it than restarting miner and work lke usually
now i just setup my miner auto restart in 30 minutes to avoid that (stuck on minng process)
sometimes server get loss or disconneted at all, if miner not auto restart than will stuck if we not restart it
If there is no work for the miner, the miner gets disconnected. This may happen on some particular algorithms. We suggest you to use best-profit multi-algo mining which will enable you to get best profits. More info here: https://www.nicehash.com/index.jsp?p=multialgo
June 09, 2015, 10:31:48 AM
I was on Asia/Indonesia
using westhash stratum without state (stratum+tcp://stratum.westhash.com:3336), working good
when set on (stratum+tcp://x11.usa.nicehash.com:3336), often waiting for work to be available..... on my sgminer
what is the best stratum on my location
when i used stratum without state, whats server connected/used on my stratum
why cannot connected to whirlpoolx and x15 westhash
1 year used nice/westhash service, thats nice be with you
using westhash stratum without state (stratum+tcp://stratum.westhash.com:3336), working good
when set on (stratum+tcp://x11.usa.nicehash.com:3336), often waiting for work to be available..... on my sgminer
what is the best stratum on my location
when i used stratum without state, whats server connected/used on my stratum
why cannot connected to whirlpoolx and x15 westhash
1 year used nice/westhash service, thats nice be with you
Please read this FAQ, should help you choose best location.
https://www.nicehash.com/index.jsp?p=faq#faqs12
how to whirlpolx, why can not mined
hk is fastest server but often RTO, even today from 9 am to 5 pm my miner is running but not connected with westhash pool
If there are no orders to work on, then your miner will not be able to connect.
https://www.westhash.com/index.jsp?p=allorders&a=10
what you mean with "order"
i'm a miner, not rented or something
just mining on, i think my miner working but stuck on progress, when i look for it than restarting miner and work lke usually
now i just setup my miner auto restart in 30 minutes to avoid that (stuck on minng process)
sometimes server get loss or disconneted at all, if miner not auto restart than will stuck if we not restart it
June 09, 2015, 07:02:42 AM
I was on Asia/Indonesia
using westhash stratum without state (stratum+tcp://stratum.westhash.com:3336), working good
when set on (stratum+tcp://x11.usa.nicehash.com:3336), often waiting for work to be available..... on my sgminer
what is the best stratum on my location
when i used stratum without state, whats server connected/used on my stratum
why cannot connected to whirlpoolx and x15 westhash
1 year used nice/westhash service, thats nice be with you
using westhash stratum without state (stratum+tcp://stratum.westhash.com:3336), working good
when set on (stratum+tcp://x11.usa.nicehash.com:3336), often waiting for work to be available..... on my sgminer
what is the best stratum on my location
when i used stratum without state, whats server connected/used on my stratum
why cannot connected to whirlpoolx and x15 westhash
1 year used nice/westhash service, thats nice be with you
Please read this FAQ, should help you choose best location.
https://www.nicehash.com/index.jsp?p=faq#faqs12
how to whirlpolx, why can not mined
hk is fastest server but often RTO, even today from 9 am to 5 pm my miner is running but not connected with westhash pool
If there are no orders to work on, then your miner will not be able to connect.
https://www.westhash.com/index.jsp?p=allorders&a=10
June 09, 2015, 06:14:03 AM
I was on Asia/Indonesia
using westhash stratum without state (stratum+tcp://stratum.westhash.com:3336), working good
when set on (stratum+tcp://x11.usa.nicehash.com:3336), often waiting for work to be available..... on my sgminer
what is the best stratum on my location
when i used stratum without state, whats server connected/used on my stratum
why cannot connected to whirlpoolx and x15 westhash
1 year used nice/westhash service, thats nice be with you
using westhash stratum without state (stratum+tcp://stratum.westhash.com:3336), working good
when set on (stratum+tcp://x11.usa.nicehash.com:3336), often waiting for work to be available..... on my sgminer
what is the best stratum on my location
when i used stratum without state, whats server connected/used on my stratum
why cannot connected to whirlpoolx and x15 westhash
1 year used nice/westhash service, thats nice be with you
Please read this FAQ, should help you choose best location.
https://www.nicehash.com/index.jsp?p=faq#faqs12
how to whirlpolx, why can not mined
hk is fastest server but often RTO, even today from 9 am to 5 pm my miner is running but not connected with westhash pool
June 09, 2015, 04:10:21 AM
since yesterday all eu servers are reporting dead in my sgminer. I didn't change the configuration and had it working before without any problems.
Example for an server configured:
Is anything wrong?
Example for an server configured:
Code:
Pool: stratum+tcp://quark.eu.nicehash.com:3345
Code:
# resolveip x11.eu.nicehash.com
IP address of x11.eu.nicehash.com is 159.8.42.123
IP address of x11.eu.nicehash.com is 37.58.117.214
Code:
# resolveip quark.eu.nicehash.com
IP address of quark.eu.nicehash.com is 37.58.117.214
IP address of quark.eu.nicehash.com is 159.8.42.123
Code:
# telnet quark.eu.nicehash.com 3345
Trying 37.58.117.214...
Connected to quark.eu.nicehash.com.
Escape character is '^]'.
Connection closed by foreign host.
Is anything wrong?
June 09, 2015, 02:39:47 AM
Why does the difficulty change even when I manually set it with the d=16384 command?
I'm using some KNC Titans to connect to the scrypt server and never had problems, until today.
Nothing changed on my end, but when I look at the status page with my address, it shows a CRAZY high reject rate after the difficulty goes past my set amount.
For a few minutes while it's at the 16384 set amount, it's fine, then the difficulty shoots up and up to 60% reject rates.
This is happening on 2 KNC titans.
ANy clue?
I'm using some KNC Titans to connect to the scrypt server and never had problems, until today.
Nothing changed on my end, but when I look at the status page with my address, it shows a CRAZY high reject rate after the difficulty goes past my set amount.
For a few minutes while it's at the 16384 set amount, it's fine, then the difficulty shoots up and up to 60% reject rates.
This is happening on 2 KNC titans.
ANy clue?
With d, you can only adjust starting diff. Diff will shoot up if diff is too low, eg when your miners are sending a lot of shares. 16384 is very low for Titan - about 1 share per 2 seconds. That is why diff is increased.
To reduce reject issues, you should use never software.
June 08, 2015, 09:26:36 PM
Why does the difficulty change even when I manually set it with the d=16384 command?
I'm using some KNC Titans to connect to the scrypt server and never had problems, until today.
Nothing changed on my end, but when I look at the status page with my address, it shows a CRAZY high reject rate after the difficulty goes past my set amount.
For a few minutes while it's at the 16384 set amount, it's fine, then the difficulty shoots up and up to 60% reject rates.
This is happening on 2 KNC titans.
ANy clue?
I'm using some KNC Titans to connect to the scrypt server and never had problems, until today.
Nothing changed on my end, but when I look at the status page with my address, it shows a CRAZY high reject rate after the difficulty goes past my set amount.
For a few minutes while it's at the 16384 set amount, it's fine, then the difficulty shoots up and up to 60% reject rates.
This is happening on 2 KNC titans.
ANy clue?
June 08, 2015, 06:43:10 AM
I was on Asia/Indonesia
using westhash stratum without state (stratum+tcp://stratum.westhash.com:3336), working good
when set on (stratum+tcp://x11.usa.nicehash.com:3336), often waiting for work to be available..... on my sgminer
what is the best stratum on my location
when i used stratum without state, whats server connected/used on my stratum
why cannot connected to whirlpoolx and x15 westhash
1 year used nice/westhash service, thats nice be with you
using westhash stratum without state (stratum+tcp://stratum.westhash.com:3336), working good
when set on (stratum+tcp://x11.usa.nicehash.com:3336), often waiting for work to be available..... on my sgminer
what is the best stratum on my location
when i used stratum without state, whats server connected/used on my stratum
why cannot connected to whirlpoolx and x15 westhash
1 year used nice/westhash service, thats nice be with you
Please read this FAQ, should help you choose best location.
https://www.nicehash.com/index.jsp?p=faq#faqs12
June 08, 2015, 06:38:27 AM
I was on Asia/Indonesia
using westhash stratum without state (stratum+tcp://stratum.westhash.com:3336), working good
when set on (stratum+tcp://x11.usa.nicehash.com:3336), often waiting for work to be available..... on my sgminer
what is the best stratum on my location
when i used stratum without state, whats server connected/used on my stratum
why cannot connected to whirlpoolx and x15 westhash
1 year used nice/westhash service, thats nice be with you
using westhash stratum without state (stratum+tcp://stratum.westhash.com:3336), working good
when set on (stratum+tcp://x11.usa.nicehash.com:3336), often waiting for work to be available..... on my sgminer
what is the best stratum on my location
when i used stratum without state, whats server connected/used on my stratum
why cannot connected to whirlpoolx and x15 westhash
1 year used nice/westhash service, thats nice be with you
June 08, 2015, 04:39:05 AM
Seller speaking here.....I would be happy to come back if the buyers price went up.....or the fee was lower.
Just my $.02
the fee is truly too high, 3% for buyer and 3% for seller... Just my $.02
June 07, 2015, 04:45:06 PM
Seller speaking here.....I would be happy to come back if the buyers price went up.....or the fee was lower.
Just my $.02
Just my $.02
June 07, 2015, 12:24:29 PM
There was no down time. Can you elabore what kind of down time you are talking about?
We did stratum restart too this time, which caused all miners to be disconnected.
As always, we are improving the service, constantly putting in small adjustments and fixes to offer the best mining experience to all customers.
June 07, 2015, 11:48:45 AM
There was no down time. Can you elabore what kind of down time you are talking about?
June 06, 2015, 07:02:15 AM
Ok, but it's possible that a bunch of other people experienced the same thing. You might want to put something in place for when the front-end comes back online it doesn't rely on visitors to try F5'ing.
Already forwarded this issue to dev. department.
June 06, 2015, 05:15:18 AM
Ok, but it's possible that a bunch of other people experienced the same thing. You might want to put something in place for when the front-end comes back online it doesn't rely on visitors to try F5'ing.
Jump to: