[ANN] NiceHash.com - sell & buy hash rate cloud mining service / multipool - page 177.

NiceHashSupport

hero member

Activity: 588

Merit: 501

Quote from: PeaMine on May 31, 2015, 03:14:39 PM

Still having issue with both my S4/S5 using p=0.01 and for the Antminer's #xnsub in the URL
Both only actually show a checkmark on WestHash if no price limit is set (password field left blank).
The #xnsub to the URL on the S4/S5 seems to actually null the price setting as well, as it will never fail over to the other pool even when the price is not being met.

Contact me on PM, I will give you address of special logging proxy and we will see what is actually happening

PeaMine

hero member

Activity: 979

Merit: 510

Wanted to mention with the new URLs:
sha256.usa.nicehash.com:3334
They work, but the #xnsub will always make it show as dead.

poncawarrior

newbie

Activity: 48

Merit: 0

Would somebody plz tell me - Whats the best setting for - ZeusMiner HURRICANE X3 - using bfgminer???

chrysophylax

legendary

Activity: 2912

Merit: 1091

--- ChainWorks Industries ---

Quote from: nicehash on May 30, 2015, 01:14:20 PM

Quote from: chrysophylax on May 29, 2015, 10:15:50 PM

telnet works - but connection to the port via the proxy doesnt with usa - but does with eu ...

all settings are exactly the same except for the address prefix ( x15.usa - x15.eu ) ...

go figure ...

#crysx

Therefore we can rule out networking issues. Obviously when you connect to WestHash your miner is put on some orders, providing your miner with some work that it "doesn't like". What kind of software are you using, ccminer or sgminer? What error exactly does your miner gives you?

no - not at all ...

it is the stratehm proxy that connects to your stratums with the farm behind it ...

a mix of miners - but mainly ccminer-spmod and sgminer-dev ( changing to latest sgminer next week ) ...

it is not the miners ( or mining software ) that is the issue - it is the connectivity of to your site ...

the proxies get disconnected with regularity on nicehash - and since you have whitelisted our ip for the donation / farm proxies - they stay connected more often than not ...

though the proxies still do get disconnected with regularity - they can reconnect and dont get banned now

...

we will be in full swing with the proxies in the next week ... thats when the real test will happen ...

#crysx

nicehash

legendary

Activity: 885

Merit: 1006

NiceHash.com

BitGo is having some intermittent issues right now, deposits are coming through a bit slower than usual. We'll keep you updated.

nicehash

legendary

Activity: 885

Merit: 1006

NiceHash.com

Quote from: chrysophylax on May 29, 2015, 10:15:50 PM

telnet works - but connection to the port via the proxy doesnt with usa - but does with eu ...

all settings are exactly the same except for the address prefix ( x15.usa - x15.eu ) ...

go figure ...

#crysx

Therefore we can rule out networking issues. Obviously when you connect to WestHash your miner is put on some orders, providing your miner with some work that it "doesn't like". What kind of software are you using, ccminer or sgminer? What error exactly does your miner gives you?

chrysophylax

legendary

Activity: 2912

Merit: 1091

--- ChainWorks Industries ---

Quote from: nicehash on May 29, 2015, 04:27:34 PM

Quote from: Prelude on May 29, 2015, 11:49:41 AM

Quote from: chrysophylax on May 29, 2015, 11:48:00 AM

Quote from: Prelude on May 29, 2015, 11:46:12 AM

Is there a problem? Can't connect to either stratum+tcp://sha256.usa.nicehash.com:3334 or stratum+tcp://stratum.westhash.com:3334

we have the same issue with x15 on our end ...

x15.usa stratum - no connect ... x15.eu stratum - is fine ...

#crysx

Confirmed, .eu works but .usa doesn't.

Hmm this should work. Are you using the correct port? Can you please try these commands from Windows command prompt (or Linux shell):

telnet 198.11.195.136 3339

telnet 192.155.218.242 3339

And copy paste output or make print-screen (you can send it to [email protected]).

telnet works - but connection to the port via the proxy doesnt with usa - but does with eu ...

all settings are exactly the same except for the address prefix ( x15.usa - x15.eu ) ...

go figure ...

#crysx

Prelude

legendary

Activity: 1596

Merit: 1000

Quote from: nicehash on May 29, 2015, 04:27:34 PM

Quote from: Prelude on May 29, 2015, 11:49:41 AM

Quote from: chrysophylax on May 29, 2015, 11:48:00 AM

Quote from: Prelude on May 29, 2015, 11:46:12 AM

Is there a problem? Can't connect to either stratum+tcp://sha256.usa.nicehash.com:3334 or stratum+tcp://stratum.westhash.com:3334

we have the same issue with x15 on our end ...

x15.usa stratum - no connect ... x15.eu stratum - is fine ...

#crysx

Confirmed, .eu works but .usa doesn't.

Hmm this should work. Are you using the correct port? Can you please try these commands from Windows command prompt (or Linux shell):

telnet 198.11.195.136 3339

telnet 192.155.218.242 3339

And copy paste output or make print-screen (you can send it to [email protected]).

Just got home and gave usa a try again, it's working now. Guess you guys fixed whatever was wrong?

Let me know if you still need me to run the telnet.

nicehash

legendary

Activity: 885

Merit: 1006

NiceHash.com

Quote from: Prelude on May 29, 2015, 11:49:41 AM

Quote from: chrysophylax on May 29, 2015, 11:48:00 AM

Quote from: Prelude on May 29, 2015, 11:46:12 AM

Is there a problem? Can't connect to either stratum+tcp://sha256.usa.nicehash.com:3334 or stratum+tcp://stratum.westhash.com:3334

we have the same issue with x15 on our end ...

x15.usa stratum - no connect ... x15.eu stratum - is fine ...

#crysx

Confirmed, .eu works but .usa doesn't.

Hmm this should work. Are you using the correct port? Can you please try these commands from Windows command prompt (or Linux shell):

telnet 198.11.195.136 3339

telnet 192.155.218.242 3339

And copy paste output or make print-screen (you can send it to [email protected]).

Prelude

legendary

Activity: 1596

Merit: 1000

Quote from: NiceHashSupport on May 29, 2015, 11:51:09 AM

Quote from: Prelude on May 29, 2015, 11:49:41 AM

Quote from: chrysophylax on May 29, 2015, 11:48:00 AM

Quote from: Prelude on May 29, 2015, 11:46:12 AM

Is there a problem? Can't connect to either stratum+tcp://sha256.usa.nicehash.com:3334 or stratum+tcp://stratum.westhash.com:3334

we have the same issue with x15 on our end ...

x15.usa stratum - no connect ... x15.eu stratum - is fine ...

#crysx

Confirmed, .eu works but .usa doesn't.

Contact [email protected] with your mining IP address.

My IP isn't static, will this be an issue going forward?

NiceHashSupport

hero member

Activity: 588

Merit: 501

Quote from: Prelude on May 29, 2015, 11:49:41 AM

Quote from: chrysophylax on May 29, 2015, 11:48:00 AM

Quote from: Prelude on May 29, 2015, 11:46:12 AM

Is there a problem? Can't connect to either stratum+tcp://sha256.usa.nicehash.com:3334 or stratum+tcp://stratum.westhash.com:3334

we have the same issue with x15 on our end ...

x15.usa stratum - no connect ... x15.eu stratum - is fine ...

#crysx

Confirmed, .eu works but .usa doesn't.

Contact [email protected] with your mining IP address.

Prelude

legendary

Activity: 1596

Merit: 1000

Quote from: chrysophylax on May 29, 2015, 11:48:00 AM

Quote from: Prelude on May 29, 2015, 11:46:12 AM

Is there a problem? Can't connect to either stratum+tcp://sha256.usa.nicehash.com:3334 or stratum+tcp://stratum.westhash.com:3334

we have the same issue with x15 on our end ...

x15.usa stratum - no connect ... x15.eu stratum - is fine ...

#crysx

Confirmed, .eu works but .usa doesn't.

chrysophylax

legendary

Activity: 2912

Merit: 1091

--- ChainWorks Industries ---

Quote from: Prelude on May 29, 2015, 11:46:12 AM

Is there a problem? Can't connect to either stratum+tcp://sha256.usa.nicehash.com:3334 or stratum+tcp://stratum.westhash.com:3334

we have the same issue with x15 on our end ...

x15.usa stratum - no connect ... x15.eu stratum - is fine ...

#crysx

Prelude

legendary

Activity: 1596

Merit: 1000

Is there a problem? Can't connect to either stratum+tcp://sha256.usa.nicehash.com:3334 or stratum+tcp://stratum.westhash.com:3334

coinut

full member

Activity: 253

Merit: 100

ccminer.exe -a quark -d 0 -o quark.usa.nicehash.com:3345

is this correct? can't seem to connect

innerchaos

full member

Activity: 145

Merit: 100

Quote from: vabchgent on May 27, 2015, 10:45:46 AM

Quote from: innerchaos on May 26, 2015, 08:26:51 PM

is there a setting I need that would make my miner switch out of your pool..

I have my min price at p=0.0099

and my miner just freewheeled for hours - I see a ton of discarded and I am assuming the price that I set was not met so it just discarded it.

my second or third pool did not take over as I thought it would switch if my price was not met.

also is there a way to take downgrade the firmware back to 4.8.0. The 4.9.0 is actually worse for me it seems to stop randomly now

What type of miner. I would think some sort of Antminer? Thanks

Yes antminer s5

jstefanop

legendary

Activity: 2174

Merit: 1401

Quote from: NiceHashSupport on May 27, 2015, 01:54:57 PM

Quote from: jstefanop on May 27, 2015, 01:26:48 PM

Im getting a steady 5% reject rate on both my S5's. They are both running with etxtranouncce sub. Other pools these are running with near 0% reject. Ive tried forcing a 1k diff setting but nicehash still keeps changing it to 4k after a few min.

The high diff might be one issue contributing to the high reject rate (other pools with low reject accept a 1k diff for S5s).

Any suggestions?

Where are you from and where do you mine? NH or WH?

US east coast and mine on westhash using sha256.usa.nicehash.com:3334

NiceHashSupport

hero member

Activity: 588

Merit: 501

Quote from: jstefanop on May 27, 2015, 01:26:48 PM

Im getting a steady 5% reject rate on both my S5's. They are both running with etxtranouncce sub. Other pools these are running with near 0% reject. Ive tried forcing a 1k diff setting but nicehash still keeps changing it to 4k after a few min.

The high diff might be one issue contributing to the high reject rate (other pools with low reject accept a 1k diff for S5s).

Any suggestions?

Where are you from and where do you mine? NH or WH?

jstefanop

legendary

Activity: 2174

Merit: 1401

Im getting a steady 5% reject rate on both my S5's. They are both running with etxtranouncce sub. Other pools these are running with near 0% reject. Ive tried forcing a 1k diff setting but nicehash still keeps changing it to 4k after a few min.

The high diff might be one issue contributing to the high reject rate (other pools with low reject accept a 1k diff for S5s).

Any suggestions?

vabchgent

sr. member

Activity: 840

Merit: 251

Quote from: innerchaos on May 26, 2015, 08:26:51 PM

is there a setting I need that would make my miner switch out of your pool..

I have my min price at p=0.0099

and my miner just freewheeled for hours - I see a ton of discarded and I am assuming the price that I set was not met so it just discarded it.

my second or third pool did not take over as I thought it would switch if my price was not met.

also is there a way to take downgrade the firmware back to 4.8.0. The 4.9.0 is actually worse for me it seems to stop randomly now

What type of miner. I would think some sort of Antminer? Thanks

Topic: [ANN] NiceHash.com - sell & buy hash rate cloud mining service / multipool - page 177. (Read 794394 times)