[ANN] NiceHash.com - sell & buy hash rate cloud mining service / multipool - page 176.

NiceHashSupport

hero member

Activity: 588

Merit: 501

Quote from: cryptodevil on June 06, 2015, 04:46:05 AM

Quote from: NiceHashSupport on June 06, 2015, 03:06:30 AM

Quote from: cryptodevil on June 06, 2015, 02:39:52 AM

You'll probably find the reason for the dropping hashrate is because the front-end has been down for a couple of days and miners don't like to leave their machines hashing when they can't see how much, or if, they are getting paid for their hashpower.

There was no down time. Can you elabore what kind of down time you are talking about?

The total SHA256 hashpower hasn't decreased, but moved to WestHash market. You might check it out.

Well whenever I try to view the nicehash.com website I have been getting this these last couple of days:

[edit] now that's interesting. This is the message I've been getting from google Chrome but because you said it hasn't been down I just checked in Firefox and it loads fine. What could have caused that?

Your browser cache - try pressing F5. We sometimes do restart the frontend, because we are putting on updates, but the downtime is the only a minute or two.

cryptodevil

legendary

Activity: 2240

Merit: 1254

Thread-puller extraordinaire

Quote from: NiceHashSupport on June 06, 2015, 03:06:30 AM

Quote from: cryptodevil on June 06, 2015, 02:39:52 AM

You'll probably find the reason for the dropping hashrate is because the front-end has been down for a couple of days and miners don't like to leave their machines hashing when they can't see how much, or if, they are getting paid for their hashpower.

There was no down time. Can you elabore what kind of down time you are talking about?

The total SHA256 hashpower hasn't decreased, but moved to WestHash market. You might check it out.

Well whenever I try to view the nicehash.com website I have been getting this these last couple of days:

[edit] now that's interesting. This is the message I've been getting from google Chrome but because you said it hasn't been down I just checked in Firefox and it loads fine. What could have caused that?

NiceHashSupport

hero member

Activity: 588

Merit: 501

Quote from: cryptodevil on June 06, 2015, 02:39:52 AM

You'll probably find the reason for the dropping hashrate is because the front-end has been down for a couple of days and miners don't like to leave their machines hashing when they can't see how much, or if, they are getting paid for their hashpower.

There was no down time. Can you elabore what kind of down time you are talking about?

The total SHA256 hashpower hasn't decreased, but moved to WestHash market. You might check it out.

cryptodevil

legendary

Activity: 2240

Merit: 1254

Thread-puller extraordinaire

You'll probably find the reason for the dropping hashrate is because the front-end has been down for a couple of days and miners don't like to leave their machines hashing when they can't see how much, or if, they are getting paid for their hashpower.

GoRDoN-ChoU

newbie

Activity: 39

Merit: 0

hashrate is decreasing these days, I think it would help if admin set a lower fee rate so that buyer would offer a better price for hashes and more miners would join.

http://i.imgur.com/9y3W7UEl.png

TracerX

hero member

Activity: 918

Merit: 1002

Quote from: vabchgent on June 04, 2015, 12:58:13 PM

Quote from: PeaMine on June 04, 2015, 12:41:49 AM

Quote from: PeaMine on May 31, 2015, 03:39:55 PM

The Antminer S5/S4 will keep the pool shown as Alive using #xnsub on the old URL (new url does not work with #xnsub on all of my miners).
If the price is not met, the pool stays Alive, but does no work and submits no work, and will not failover to the 2nd pool.
SP20 does not have this problem.
I am using Wed Jan 7 14:05:02 CST 2015 Firmware on the S5.
Also tried Wed Apr 15 15:17:03 CST 2015 on the S5.
Tried all Firmware on the S4, same issue.
Leaving them without the #xnsub on the old or new URL works properly and fails over to 2nd pool when price is not met, but no extra nonce subscribe of course.
Thanks for the attention to this issue! Love your site.

Anyone else have this issue for Antminer S4/S5?
If not, how did you fix it?

For the S4 I set up a stratum proxy on a raspberry PI. The S4 does not like when Nicehash drops below the profit. The S4 will drop or lock up. So the fix is create a Stratum proxy in your network -point your machines at it. Then out to Nicehash.

Full instruction can be found here
https://github.com/Stratehm/stratum-proxy

This is a solid technique--I struggled with the same issue. Kudos!

vabchgent

sr. member

Activity: 840

Merit: 251

Quote from: PeaMine on June 04, 2015, 12:41:49 AM

Quote from: PeaMine on May 31, 2015, 03:39:55 PM

The Antminer S5/S4 will keep the pool shown as Alive using #xnsub on the old URL (new url does not work with #xnsub on all of my miners).
If the price is not met, the pool stays Alive, but does no work and submits no work, and will not failover to the 2nd pool.
SP20 does not have this problem.
I am using Wed Jan 7 14:05:02 CST 2015 Firmware on the S5.
Also tried Wed Apr 15 15:17:03 CST 2015 on the S5.
Tried all Firmware on the S4, same issue.
Leaving them without the #xnsub on the old or new URL works properly and fails over to 2nd pool when price is not met, but no extra nonce subscribe of course.
Thanks for the attention to this issue! Love your site.

Anyone else have this issue for Antminer S4/S5?
If not, how did you fix it?

For the S4 I set up a stratum proxy on a raspberry PI. The S4 does not like when Nicehash drops below the profit. The S4 will drop or lock up. So the fix is create a Stratum proxy in your network -point your machines at it. Then out to Nicehash.

Full instruction can be found here
https://github.com/Stratehm/stratum-proxy

nicehash

legendary

Activity: 885

Merit: 1006

NiceHash.com

Quote from: PeaMine on June 04, 2015, 12:41:49 AM

Quote from: PeaMine on May 31, 2015, 03:39:55 PM

The Antminer S5/S4 will keep the pool shown as Alive using #xnsub on the old URL (new url does not work with #xnsub on all of my miners).
If the price is not met, the pool stays Alive, but does no work and submits no work, and will not failover to the 2nd pool.
SP20 does not have this problem.
I am using Wed Jan 7 14:05:02 CST 2015 Firmware on the S5.
Also tried Wed Apr 15 15:17:03 CST 2015 on the S5.
Tried all Firmware on the S4, same issue.
Leaving them without the #xnsub on the old or new URL works properly and fails over to 2nd pool when price is not met, but no extra nonce subscribe of course.
Thanks for the attention to this issue! Love your site.

Anyone else have this issue for Antminer S4/S5?
If not, how did you fix it?

Are you using original firmware or optimized by smith (available here: https://www.nicehash.com/index.jsp?p=software#asic)?

PeaMine

hero member

Activity: 979

Merit: 510

Quote from: PeaMine on May 31, 2015, 03:39:55 PM

The Antminer S5/S4 will keep the pool shown as Alive using #xnsub on the old URL (new url does not work with #xnsub on all of my miners).
If the price is not met, the pool stays Alive, but does no work and submits no work, and will not failover to the 2nd pool.
SP20 does not have this problem.
I am using Wed Jan 7 14:05:02 CST 2015 Firmware on the S5.
Also tried Wed Apr 15 15:17:03 CST 2015 on the S5.
Tried all Firmware on the S4, same issue.
Leaving them without the #xnsub on the old or new URL works properly and fails over to 2nd pool when price is not met, but no extra nonce subscribe of course.
Thanks for the attention to this issue! Love your site.

Anyone else have this issue for Antminer S4/S5?
If not, how did you fix it?

NiceHashSupport

hero member

Activity: 588

Merit: 501

Quote from: jelin1984 on June 03, 2015, 04:40:56 AM

link for europe?

what i must put as stratum? Huh

scrypt.eu.nicehash.com:3333

jelin1984

legendary

Activity: 2408

Merit: 1004

link for europe?

what i must put as stratum? Huh

NiceHashSupport

hero member

Activity: 588

Merit: 501

Quote from: jelin1984 on June 03, 2015, 03:42:13 AM

any news server for

titan miner??? Grin

We recommend you to try NH/WH again and see how it goes. Titans should be affected too (with better performance of course).

jelin1984

legendary

Activity: 2408

Merit: 1004

any news server for

titan miner??? Grin

chrysophylax

legendary

Activity: 2912

Merit: 1091

--- ChainWorks Industries ---

Quote from: nicehash on June 02, 2015, 04:16:29 PM

We've established two new stratum server entry-points locations: China - Hong Kong and Japan - Tokyo. Take a look at https://www.nicehash.com/index.jsp?p=gstarted

Also, all stratum servers are now even more optimized for better efficiency when mining with modern miners such as AntMiner S5, etc.

Thank you for using our service and keep on hashing Wink

great ...

we will add those to the list in the proxies for failover ...

will these also have the current whitelist running also? ... as we dont want to add them only to be rejected from the stratums ...

tanx for your great work so far ...

#crysx

nicehash

legendary

Activity: 885

Merit: 1006

NiceHash.com

We've established two new stratum server entry-points locations: China - Hong Kong and Japan - Tokyo. Take a look at https://www.nicehash.com/index.jsp?p=gstarted

Also, all stratum servers are now even more optimized for better efficiency when mining with modern miners such as AntMiner S5, etc.

Thank you for using our service and keep on hashing Wink

toptek

legendary

Activity: 1274

Merit: 1000

My question

Why does the nice hash bot just stop and say in yellow letters there is not enough founds to use it but when i go to the site there it is still running i usually have more then enough to keep using the BOT. and CS here suX, so I'm asking if others might no, not CS .

toptek

legendary

Activity: 1274

Merit: 1000

Quote from: poncawarrior on May 31, 2015, 03:03:33 PM

Would somebody plz tell me - Whats the best setting for - ZeusMiner HURRICANE X3 - using bfgminer???

--scrypt -S all -o stratum+tcp://scrypt.usa.nicehash.com:3333 -u your btc adresss -p x --set-device zeus:clock=328 --set-device zeus:chips=64 --set zus:ignore_golden_nonce=1

that's work with any version of BFG that supports ZeusMiner, the version i would use for ZeusMiner is http://blog.rastating.com/mining-dogecoin-with-a-zeusminer-blizzard-and-a-raspberry-pi/ ...... or get it here https://litecointalk.org/index.php?topic=20477.0

or use ZoomHASH http://zoomhash.com/pages/raspberry-pi-software-update this one has 4.30 BFG . OR use MINERA later this week once the new version is released he fixed the Calculation bug in MINERA with any version over 4.3.1 i was told .

you just won't have extranonoce.subscribe subscription Support with BFG 4.3.1. I have run my hurricane for hours on westhash without using extranonoce.subscribe subscription with out one issue ever .

NiceHashSupport

hero member

Activity: 588

Merit: 501

Stratum proxy code on WestHash has been improved. Hopefully, this shall improve mining performance for Antminer S5 users. Let us know if you notice any irregularities, and also if you notice any improvements.

PeaMine

hero member

Activity: 979

Merit: 510

The Antminer S5/S4 will keep the pool shown as Alive using #xnsub on the old URL (new url does not work with #xnsub on all of my miners).
If the price is not met, the pool stays Alive, but does no work and submits no work, and will not failover to the 2nd pool.
SP20 does not have this problem.
I am using Wed Jan 7 14:05:02 CST 2015 Firmware on the S5.
Also tried Wed Apr 15 15:17:03 CST 2015 on the S5.
Tried all Firmware on the S4, same issue.
Leaving them without the #xnsub on the old or new URL works properly and fails over to 2nd pool when price is not met, but no extra nonce subscribe of course.
Thanks for the attention to this issue! Love your site.

PeaMine

hero member

Activity: 979

Merit: 510

Quote from: NiceHashSupport on May 31, 2015, 03:31:13 PM

Quote from: PeaMine on May 31, 2015, 03:14:39 PM

Still having issue with both my S4/S5 using p=0.01 and for the Antminer's #xnsub in the URL
Both only actually show a checkmark on WestHash if no price limit is set (password field left blank).
The #xnsub to the URL on the S4/S5 seems to actually null the price setting as well, as it will never fail over to the other pool even when the price is not being met.

Contact me on PM, I will give you address of special logging proxy and we will see what is actually happening

Sorry, this issue seems to have been fixed, I am still testing, but confirmed the SP20 is working 100% as intended with the old URLs. The new URLs however do not seem to accept the #xnsub at all.

Topic: [ANN] NiceHash.com - sell & buy hash rate cloud mining service / multipool - page 176. (Read 794394 times)