[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 426.

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

Quote from: jpass022 on August 20, 2014, 03:18:11 PM

Quote from: Guy Corem on August 20, 2014, 02:16:30 PM

Quote from: jpass022 on August 20, 2014, 10:53:23 AM

Price went up for late October SP31...

Calculate $/GHs

August Group Buy
4500 / 6000 = 0.75 $/GHs Original
4500 / 4500 = 1.00 $/GHs Reality

September Price
3895 / 4500 = 0.87 $/GHs

End of October Price
3920 / 5500 = 0.71 $/GHs

All depends on the difficulty growth of course...

I would appreciate being able to apply whatever compensation you are offering for the August orders towards the now available late October units?

Original will equal Reality. Please contact sales@

RoadStress

legendary

Activity: 1904

Merit: 1007

Quote from: ?? on ??

Who would ever believe RoadStress' numbers? He has been in the KnC thread with negative garbage far more than I've been here and he slants everything in every possible way into a biased POV. I totally don't believe his findings.

However, I don't say his assertion is not factual. Maybe someone who knows how to take decent measurements and without a Spondoolies dick to suck, might come to the same conclusion. That would be worth learning about.

Check my post history. I have praised KnC last autumn. I have opposed Avenger many times, but the situation was different. Late 2013 KnC was king same as Avalon was in early 2013. In 2014 situation has changed. I chose to refund my Neptune pre-order and with the money spent on 3Th/s hardware I got 9Th/s from Spondoolies Tech. It took more than 3 weeks to get a refund from KnC and around 50 e-mails sent to their support team. Yes KnC sucks and everyone should know this. While Neptunes are bursting into flames my SP30 bundle is happily hashing with 3x more hashpower.

0.578W/Gh

Quote from: ?? on ??

But +18.5 BTC for RoadStress

The money were donated, check GB OP.

jpass022

member

Activity: 65

Merit: 10

Quote from: Guy Corem on August 20, 2014, 02:16:30 PM

Quote from: jpass022 on August 20, 2014, 10:53:23 AM

Price went up for late October SP31...

Calculate $/GHs

August Group Buy
4500 / 6000 = 0.75 $/GHs Original
4500 / 4500 = 1.00 $/GHs Reality

September Price
3895 / 4500 = 0.87 $/GHs

End of October Price
3920 / 5500 = 0.71 $/GHs

All depends on the difficulty growth of course...

I would appreciate being able to apply whatever compensation you are offering for the August orders towards the now available late October units?

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

Quote from: TheJuice on August 20, 2014, 02:28:48 PM

Quote from: Guy Corem on August 20, 2014, 02:16:30 PM

Quote from: jpass022 on August 20, 2014, 10:53:23 AM

Price went up for late October SP31...

Calculate $/GHs

Calculate BTC/GHs

Looking better and better ...

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

Quote from: tempestb on August 20, 2014, 03:04:51 PM

Quote from: newguy05 on August 20, 2014, 02:24:53 PM

Hi does anyone know below:

1) if the first august sp30 orders have shipped

2) how come the power consumption is higher than the total output of the 2x power supply (sorry newbie question) ? How will that even work/

Power Supply
2 x 1200 W - Drawing 1500 W "at the wall" (approved by the manufacturer)

Nominal Power Consumption
3000 W

thanks

1. Yes - But not from the Group Buy

2. The PSU's are capable of 1500 watts and have been approved by the manufacturer to operate over their recommended spec without issue.

1200 W is the output rating. It actually can output 1350 W. When outputting 1350 W, the consumption at the wall is 1500 W

Collider

hero member

Activity: 714

Merit: 500

Also, nominal power is always 12V power, so it is at least 10% more at the wall.

tempestb

hero member

Activity: 729

Merit: 500

Quote from: newguy05 on August 20, 2014, 02:24:53 PM

Hi does anyone know below:

1) if the first august sp30 orders have shipped

2) how come the power consumption is higher than the total output of the 2x power supply (sorry newbie question) ? How will that even work/

Power Supply
2 x 1200 W - Drawing 1500 W "at the wall" (approved by the manufacturer)

Nominal Power Consumption
3000 W

thanks

1. Yes - But not from the Group Buy

2. The PSU's are capable of 1500 watts and have been approved by the manufacturer to operate over their recommended spec without issue.

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

Quote from: wpgdeez on August 20, 2014, 02:49:51 PM

Why do you keep getting slow corner batches? This was a problem with the SP10 as well.

Several lots of the Hammers were indeed slow. The problem is much more acute with the first lots of RockerBox.
In general, TSMC 40G Gaussian is much more narrower than TSMC 28 HPM Gaussian.
Which means that 28 HPM ASICs can be extreme slow but still within TSMC acceptance criteria.

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

Quote from: ?? on ??

...
But +18.5 BTC for RoadStress
...

Most of it was contributed for good causes. Go find the GB and read the OP

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

What a great tweet: https://twitter.com/thinkcrypto/status/502085864441524224 Wink

Think Crypto forgot to include the cost of the (burnt...) PSUs: https://imgur.com/a/1mDek#0 Grin

RawDog

legendary

Activity: 1596

Merit: 1026

Quote from: wpgdeez on August 20, 2014, 02:49:51 PM

Quote from: Guy Corem on August 20, 2014, 02:14:59 PM

Quote from: RoadStress on August 20, 2014, 12:30:09 PM

Quote from: dplusf on August 20, 2014, 02:47:46 AM

so anybody have any information about underclocking and extending the sp30 lifetime in light of the giant difficulty increases?

Max voltage 0.67 (can't set it lower from the web GUI) and I'm getting 3.62Th/s and 0.58W/GH!

Once I figure out how to navigate and edit the "mg_custom_mode" file will post again about this.

I found it very amusing that our extreme slow corner 28nm ASICs outperform the competition 20nm
Can't wait for October ASICs

Why do you keep getting slow corner batches? This was a problem with the SP10 as well.

The corners of Israel have been problematic since 1948. With Gaza and Lebanon being particularly slow to accept power.

wpgdeez

hero member

Activity: 728

Merit: 500

Quote from: Guy Corem on August 20, 2014, 02:14:59 PM

Quote from: RoadStress on August 20, 2014, 12:30:09 PM

Quote from: dplusf on August 20, 2014, 02:47:46 AM

so anybody have any information about underclocking and extending the sp30 lifetime in light of the giant difficulty increases?

Max voltage 0.67 (can't set it lower from the web GUI) and I'm getting 3.62Th/s and 0.58W/GH!

Once I figure out how to navigate and edit the "mg_custom_mode" file will post again about this.

I found it very amusing that our extreme slow corner 28nm ASICs outperform the competition 20nm
Can't wait for October ASICs

Why do you keep getting slow corner batches? This was a problem with the SP10 as well.

TheJuice

hero member

Activity: 845

Merit: 609

Quote from: Guy Corem on August 20, 2014, 02:16:30 PM

Quote from: jpass022 on August 20, 2014, 10:53:23 AM

Price went up for late October SP31...

Calculate $/GHs

Calculate BTC/GHs

newguy05

hero member

Activity: 1316

Merit: 503

Someone is sitting in the shade today...

Hi does anyone know below:

1) if the first august sp30 orders have shipped

2) how come the power consumption is higher than the total output of the 2x power supply (sorry newbie question) ? How will that even work/

Power Supply
2 x 1200 W - Drawing 1500 W "at the wall" (approved by the manufacturer)

Nominal Power Consumption
3000 W

thanks

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

Quote from: jpass022 on August 20, 2014, 10:53:23 AM

Price went up for late October SP31...

Calculate $/GHs

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

Quote from: RoadStress on August 20, 2014, 12:30:09 PM

Quote from: dplusf on August 20, 2014, 02:47:46 AM

so anybody have any information about underclocking and extending the sp30 lifetime in light of the giant difficulty increases?

Max voltage 0.67 (can't set it lower from the web GUI) and I'm getting 3.62Th/s and 0.58W/GH!

Once I figure out how to navigate and edit the "mg_custom_mode" file will post again about this.

I found it very amusing that our extreme slow corner 28nm ASICs outperform the competition 20nm
Can't wait for October ASICs

wh00per

hero member

Activity: 572

Merit: 500

Quote from: RawDog on August 20, 2014, 12:39:07 PM

Not that stupid. Since SP30 can't +ROI, this guy saved a ton of money getting out of this abortion early.

I'm happy that you're keeping this "Can't ROI" stance up for this long. Stupid and poorly managed businesses can't ROI. And they die. I agree with that. Once you get out of that group, you might see the light.

RawDog

legendary

Activity: 1596

Merit: 1026

Quote from: dplusf on August 20, 2014, 06:36:46 AM

i remember the 185 machine reservation. too stupid for him or her lost 18.5 btc for the reservation.

Not that stupid. Since SP30 can't +ROI, this guy saved a ton of money getting out of this abortion early.

RoadStress

legendary

Activity: 1904

Merit: 1007

Quote from: dplusf on August 20, 2014, 02:47:46 AM

so anybody have any information about underclocking and extending the sp30 lifetime in light of the giant difficulty increases?

Max voltage 0.67 (can't set it lower from the web GUI) and I'm getting 3.62Th/s and 0.58W/GH!

Once I figure out how to navigate and edit the "mg_custom_mode" file will post again about this.

RawDog

legendary

Activity: 1596

Merit: 1026

Quote from: Guy Corem on August 19, 2014, 09:08:57 PM

Quote from: Marvell1 on August 19, 2014, 03:50:22 PM

Well diff just jumped ~17% highest percentage jump in a while I hope sptech isn't mining withe the August gb hardware

You know we don't.
GB machines weren't produce yet. They'll be produced and shipped during next week.
We're producing and shipping 50-100 miners a day.

This isn't the first thing Guy said which didn't come true you know. Shipping on September 15th as I said earlier. They're will be some very good explanation coming with that and maybe some kind of a certificate with a shiny gold seal too.

Topic: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 426. (Read 1260354 times)