[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 564.

SyRenity

hero member

Activity: 756

Merit: 502

Quote from: dplusf on June 16, 2014, 04:37:02 AM

hello spondoolies,

two of my hosted miners dont work anymore. can you please check?
http://eligius.st/~wizkid057/newstats/userstats.php/1CSYmKzbbgKiEnH2QwAiobztu64X1p6ARV

thanks

We will check this, also please feel free to send a support request to [email protected].

Thanks.

raskul

sr. member

Activity: 434

Merit: 250

today is a GOOD day.
just thought i'd share that. Grin

zvisha

hero member

Activity: 560

Merit: 500

Quote from: murdof on June 16, 2014, 05:30:40 AM

I installed T75... Should I go to 1.4.4?

Roughly my temperatures are in 24C and out 75C...

Nah, don't bother. Your thermal shutdown will be updated with next version.
The thermal limitation in the back should be enough.

murdof

full member

Activity: 196

Merit: 100

I installed T75... Should I go to 1.4.4?

Roughly my temperatures are in 24C and out 75C...

zvisha

hero member

Activity: 560

Merit: 500

Quote from: Bicknellski on June 16, 2014, 04:05:22 AM

Quote from: zvisha on June 16, 2014, 03:33:57 AM

Quote from: murdof on June 15, 2014, 03:44:06 PM

Which version brings back P2Pool support?
1.4.4 Test Version or
1.4.4-t75 Test Version?

1.4.4 is for regular users.
1.4.4-t75 is for immersion cooling version of the board, it has thermal shutdown configuration matching immersion cooling environment.

OooooOoooH ... ? Did you say.... Immmmmersion.

Nice.

Note that immersion cooling will only help if the limitation is temperature (and it brings down the leakage and gives you 60A more for the fans, so one can set the limit to 1320W). In slow corner the leakage is low, and the primary limitation is DC2DC and AC2DC power.

dplusf

sr. member

Activity: 258

Merit: 250

hello spondoolies,

two of my hosted miners dont work anymore. can you please check?
http://eligius.st/~wizkid057/newstats/userstats.php/1CSYmKzbbgKiEnH2QwAiobztu64X1p6ARV

thanks

zvisha

hero member

Activity: 560

Merit: 500

Quote from: jonnybravo0311 on June 15, 2014, 06:00:03 PM

Quote from: murdof on June 15, 2014, 03:44:06 PM

Which version brings back P2Pool support?
1.4.4 Test Version or
1.4.4-t75 Test Version?

I'm running 1.4.4-t75 now; however, 1.4.4 also worked.

I don't recommend running t75 without immersion cooling since your thermal shutdown on incoming air is set to 75C. This is risky.

raskul

sr. member

Activity: 434

Merit: 250

Quote from: Bicknellski on June 16, 2014, 04:09:34 AM

Quote from: raskul on June 16, 2014, 04:07:25 AM

Quote from: Bicknellski on June 16, 2014, 04:05:22 AM

Quote from: zvisha on June 16, 2014, 03:33:57 AM

Quote from: murdof on June 15, 2014, 03:44:06 PM

Which version brings back P2Pool support?
1.4.4 Test Version or
1.4.4-t75 Test Version?

1.4.4 is for regular users.
1.4.4-t75 is for immersion cooling version of the board, it has thermal shutdown configuration matching immersion cooling environment.

OooooOoooH ... Immersion? Did you say.... Immmmmersion.

Nice.

instock now in raskul shop - fish tanks. Grin

get 'em before they sell out!

1.4 MW fish tanks? Grin

not much room for my Gourami in there Undecided

Bicknellski

hero member

Activity: 924

Merit: 1000

Quote from: raskul on June 16, 2014, 04:07:25 AM

Quote from: Bicknellski on June 16, 2014, 04:05:22 AM

Quote from: zvisha on June 16, 2014, 03:33:57 AM

Quote from: murdof on June 15, 2014, 03:44:06 PM

Which version brings back P2Pool support?
1.4.4 Test Version or
1.4.4-t75 Test Version?

1.4.4 is for regular users.
1.4.4-t75 is for immersion cooling version of the board, it has thermal shutdown configuration matching immersion cooling environment.

OooooOoooH ... Immersion? Did you say.... Immmmmersion.

Nice.

instock now in raskul shop - fish tanks. Grin

get 'em before they sell out!

1.4 MW fish tanks or the 240 kW ones? Grin

raskul

sr. member

Activity: 434

Merit: 250

Quote from: Bicknellski on June 16, 2014, 04:05:22 AM

Quote from: zvisha on June 16, 2014, 03:33:57 AM

Quote from: murdof on June 15, 2014, 03:44:06 PM

Which version brings back P2Pool support?
1.4.4 Test Version or
1.4.4-t75 Test Version?

1.4.4 is for regular users.
1.4.4-t75 is for immersion cooling version of the board, it has thermal shutdown configuration matching immersion cooling environment.

OooooOoooH ... Immersion? Did you say.... Immmmmersion.

Nice.

instock now in raskul shop - fish tanks. Grin

get 'em before they sell out!

Bicknellski

hero member

Activity: 924

Merit: 1000

Quote from: zvisha on June 16, 2014, 03:33:57 AM

Quote from: murdof on June 15, 2014, 03:44:06 PM

Which version brings back P2Pool support?
1.4.4 Test Version or
1.4.4-t75 Test Version?

1.4.4 is for regular users.
1.4.4-t75 is for immersion cooling version of the board, it has thermal shutdown configuration matching immersion cooling environment.

OooooOoooH ... Immersion? Did you say.... Immmmmersion.

Nice.

zvisha

hero member

Activity: 560

Merit: 500

Quote from: murdof on June 15, 2014, 03:44:06 PM

Which version brings back P2Pool support?
1.4.4 Test Version or
1.4.4-t75 Test Version?

1.4.4 is for regular users.
1.4.4-t75 is for immersion cooling version of the board, it has thermal shutdown configuration matching immersion cooling environment.

Searing

copper member

Activity: 2898

Merit: 1465

Clueless!

Quote from: Zelek Uther on June 16, 2014, 12:29:40 AM

Quote from: QuiveringGibbage on June 15, 2014, 05:22:04 PM

Quote from: Guy Corem on June 15, 2014, 07:33:56 AM

Quote from: QuiveringGibbage on June 15, 2014, 06:18:10 AM

so.. do people who have already made the purchased get to choose which type of PSU to ship with?
or it's completely random?
Cheers,
QG

Random

ah right, i read the doco again and get it now... Simply; for the SP30, I need a standard ICE C13 power lead and it will connect to what ever PSU is supplied.

Cheers,
QG

Sorry, I must be missing something. Don't they need different power cords? C19 vs C13:

Quote

The Emerson PSU support a C19 inlet while the Murata support a C13 one

from what i understand the plug into the power supply itself is different.but the end is your to add ...3prong usa or other

Searing

Zelek Uther

hero member

Activity: 700

Merit: 504

Run a Bitcoin node.

Quote from: QuiveringGibbage on June 15, 2014, 05:22:04 PM

Quote from: Guy Corem on June 15, 2014, 07:33:56 AM

Quote from: QuiveringGibbage on June 15, 2014, 06:18:10 AM

so.. do people who have already made the purchased get to choose which type of PSU to ship with?
or it's completely random?
Cheers,
QG

Random

ah right, i read the doco again and get it now... Simply; for the SP30, I need a standard ICE C13 power lead and it will connect to what ever PSU is supplied.

Cheers,
QG

Sorry, I must be missing something. Don't they need different power cords? C19 vs C13:

Quote

The Emerson PSU support a C19 inlet while the Murata support a C13 one

Searing

copper member

Activity: 2898

Merit: 1465

Clueless!

Quote from: Mabsark on June 15, 2014, 07:43:03 PM

Quote from: RoadStress on June 15, 2014, 03:35:37 PM

Quote from: Powell on June 15, 2014, 02:15:09 PM

RoadStress I've always wondered since you are a bitcoin mining tycoon, how much hashrate do you have right now? The way you talk I am sure you have to have 30-40TH/s at least? I remember awhile back you had 2 SP10s right what else do you have running? How many SP30's do you have on order now? Was trying to do some numbers because the way you make things sound the 17-19TH/s I had running 3 months ago making 1.5+ btc a day is going to be not NOTHING compared to running a single SP30. Which if I took delivery in mid July may make 2btc a jump if we don't see another jump above 11% until then.

I'm not a bitcoin mining tycoon yet, but I hope that someday I will be. The fact that I'm always present in the Mining forum helps me take the best decisions when it comes to mining hardware. Having limited amount of cash from the start gave me no room for errors and that's why I'm trying to stay informed. I started my ASIC adventure with 15 burnin boards with avalon gen1 chips, but right now they are offline.

Right now I'm hashing with 3 Jupiters (1 Sep/Oct that is shared with someone else+2 Nov Jupiters), 3 SP10s (soon to be 5, but 1 will hash for ckolivas and sean's outpost) and I also have 4 SP30s on pre-order(will buy 1 or 2 more from September batch too). That makes it just 6TH/s right now, but I'm proud of how I'm staying ahead of the difficulty curve. My first SP10 doubled my total hashrate and my next 2 SP10s doubled my hashrate again. It will take some time before difficulty will catch me up and the SP30s will just give me another boots so that the difficulty won't be able to catch me.

Just out of curiosity, how much BTC have each of those Jupiters mined so far?

my oct 18th arrived Jupiter 560gh (fairly stable) best estimate End of Life is 50 btc..an't too bad for a 7131.80 investment i'm at 48 now....(the day i got it for a few days briefly it was 1btc per day believe it or not...sigh the good old days or last oct 2013 ..and it was $160 a coin..so pretty much with elec I'm square if i would have just bought coin heh)

but looks like next year even spondoolies units will be to expensive ...it is all going 'industrial' imho at 600 btc you are pretty much even steven minning or buying coin

but spondoolies is 'aggressive' i give them that ..they are hungry and want that market share

Searing

RoadStress

legendary

Activity: 1904

Merit: 1007

Quote from: Mabsark on June 15, 2014, 07:43:03 PM

Just out of curiosity, how much BTC have each of those Jupiters mined so far?

I don't know exactly. I mined them either along with the burnin boards, either separately, but after doing some calculations I would say around 33 bitcoins. This may not be accurate though.

klondike_bar

legendary

Activity: 2128

Merit: 1005

ASIC Wannabe

Quote from: Biodom on June 15, 2014, 12:12:54 PM

Quote from: Guy Corem on June 15, 2014, 06:11:48 AM

SP30 AC/DC Power Supply unit guidelines - SP30 PSU

Thanks, but why C-14 as a plug instead of Nema 5-15 if you have only 1200W? Nema 5-15 is rated up to 12A constant current if I am not mistaken, which should be OK.
Just an additional headache and expense to find C13-nema 5-15p or 5-20p cord. It's not like they are laying around.

^usually they are though, check a thrift store or a firend with some old psus and youll find a 5-15 to c13 cord for free/cheap.

(The C20->C14 is nice though since those square C19/20 plugs and cords are fairly uncommon)

Mabsark

legendary

Activity: 826

Merit: 1004

Quote from: RoadStress on June 15, 2014, 03:35:37 PM

Quote from: Powell on June 15, 2014, 02:15:09 PM

RoadStress I've always wondered since you are a bitcoin mining tycoon, how much hashrate do you have right now? The way you talk I am sure you have to have 30-40TH/s at least? I remember awhile back you had 2 SP10s right what else do you have running? How many SP30's do you have on order now? Was trying to do some numbers because the way you make things sound the 17-19TH/s I had running 3 months ago making 1.5+ btc a day is going to be not NOTHING compared to running a single SP30. Which if I took delivery in mid July may make 2btc a jump if we don't see another jump above 11% until then.

I'm not a bitcoin mining tycoon yet, but I hope that someday I will be. The fact that I'm always present in the Mining forum helps me take the best decisions when it comes to mining hardware. Having limited amount of cash from the start gave me no room for errors and that's why I'm trying to stay informed. I started my ASIC adventure with 15 burnin boards with avalon gen1 chips, but right now they are offline.

Right now I'm hashing with 3 Jupiters (1 Sep/Oct that is shared with someone else+2 Nov Jupiters), 3 SP10s (soon to be 5, but 1 will hash for ckolivas and sean's outpost) and I also have 4 SP30s on pre-order(will buy 1 or 2 more from September batch too). That makes it just 6TH/s right now, but I'm proud of how I'm staying ahead of the difficulty curve. My first SP10 doubled my total hashrate and my next 2 SP10s doubled my hashrate again. It will take some time before difficulty will catch me up and the SP30s will just give me another boots so that the difficulty won't be able to catch me.

Just out of curiosity, how much BTC have each of those Jupiters mined so far?

jonnybravo0311

legendary

Activity: 1344

Merit: 1024

Mine at Jonny's Pool

Quote from: murdof on June 15, 2014, 03:44:06 PM

Which version brings back P2Pool support?
1.4.4 Test Version or
1.4.4-t75 Test Version?

I'm running 1.4.4-t75 now; however, 1.4.4 also worked.

QuiveringGibbage

hero member

Activity: 617

Merit: 543

http://idontALT.com

Quote from: Guy Corem on June 15, 2014, 07:33:56 AM

Quote from: QuiveringGibbage on June 15, 2014, 06:18:10 AM

so.. do people who have already made the purchased get to choose which type of PSU to ship with?
or it's completely random?
Cheers,
QG

Random

ah right, i read the doco again and get it now... Simply; for the SP30, I need a standard ICE C13 power lead and it will connect to what ever PSU is supplied.

Cheers,
QG

Topic: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 564. (Read 1260354 times)