Topic: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 566. (Read 1260354 times)

Moving on to my other lame brain choice NOT to host my sp30 beg of sept batch unit

cooling (upper midwest usa minnesota)

won't come till August ..which gets plenty hot...I assume? (although may have been hottest last year ever)

that my basement where I plan to put the units will not go above 35c (or if i am correct 95F) but ...it could

I got 2 $35 dual side by side temp controlled fans to put in the basement windows (usual 15" by 29" if i remember correctly vinyl replacement)

so (knowing nothing) I assume I can have one blowing air out and other dual fan setup blowing air out of the bsmt for air flow

also fan blowing over the sp30 ..maybe something like this accross the case perpendicular to the fans blowing thru ..just to get the heat away

http://www.amazon.com/Lasko-Pro-Performance-Blower-4900/dp/B001DNGSCM

again the sp30 front would be facing towards me (as you look at your screen) the fan above would be on the side blowing across sp30 right to left (you'd see its side from
your current screen postion)

so would that be enough air flow? to keep the dang thing cool?

I could build a 'high ladder like shelf" and place a small window a/c unit to blow directly on the sp30 placed on the shelf in front and/or still have a dual fan or two blowing
air out as well at the other side of the bsmt as well ..but quite frankly that feels like overkill

I know I know i probably should host it..but sept unit   oct/nov/dec will use the thing to heat the house and my elec rate was equiv to hosting rate...decided to be cheap

(and i do like my 'precious ...er i mean toys..nearby"

likely last hurrah..i really don't see me getting 5k miners next year...prob better just to buy coin...but this year I can still play 'stupid' and treat them like the
speed boat I (may/could/likely/should have) gotten for sh*ts/giggles rather then this seductive bitcoin hobby

anyway solutions/options etc

er almost forgot also will have a Titan in this mix (1250w) with the sp30 (2600w) that is (3850w)

yeah again stupid ..but just have to limp thru august maybe 1/2 of oct at worse

ah the webs we weave when we mine btc to receive ....(should prob say deceive in that i want to receive more then i coulda got buying btc but whatever)

anyway hope i get some replies to this or gonna have a 'cool' sauna in the bsmt in august

Searing



jumped early sept shoulda said sept rather then august but have the Titan in august same diff need to start planning wiring and cooling

Searing


will probably run it at 220v should look and see if they have an equiv am using the isobar 120v on my oct knc jupiter nice
little unit want to find something equiv in 220v

this looks pretty good 220v wise am very pleased with their 110v version..you look at the unit funny it shuts down exactly
what I want in a surge protector

amazon has this one looks good

http://www.amazon.com/Tripp-Lite-Isobar-suppressor-connector/dp/B00KOHV9EU/ref=sr_1_3?ie=UTF8&qid=1402834722&sr=8-3&keywords=isobar+220v


I heard the sp30's are more eff at 220v right? so whatever I can do to help the cause

(Titan and sp30 I gotta be outta my frigging mind)

Searing

I managed to wire up my old farmhouse in France a few years ago, and the mayor gave it a big pass when he got it checked to pass the building safe to live in.
Dunno how I managed it, I'd never touched electrics in my life. Funny how when needs must, things just; get done!

Did you order from Spondoolies yet Brad? thought you were having a sabbatical from purchasing after your kfc shambles?

You can easily plug your country´s specific power cord into the provided "extensions" cords.

Alternatively, you can directly plug them into one of these
http://www.tripplite.com/power-strip-12-outlets-15-ft-cord-1u-rack-mount~RS1215/

well looking at this I can't tell

https://bitcointalksearch.org/topic/m.7322968

ok never mind i see now...was thinking they were the other way around like a PC and the open 3 prong went into the power units..it is the 3 prong is always
at the one at the end of the cable for you to choose your plug

duh

I was an 'apprentice electrican' like 40 years ago ..thought maybe things had gotten odd at 220v or some such for 220v end

best to be safe..it has been 40 years

( I can however manage to wire in house anywhere I want w/o an issue that much has not changed...but equip ends..well had to ask)

Searing

they don't come with the cable anyway, so you just get your own kettle lead to fit your country specific socket. (i think that's what you are asking?)

up and down arrows beside each pool line, to move already registered pools up and down in the list would be a good idea.
If not for SP10 (since the new f/w seems spot-on), something to introduce in the UI of SP30 perhaps?

from the above i get you need something from the psu cord to the wall outlet and not really sure of this extension needed to the plug on the wall
either 220v or 120v (i plan on 220v) but the cords shipped depending on the unit you get are completely different from my google search

*unless units shipped to USA will have a standard 3 prong plug that can be used for 120v and or a 220v equiv plug*


dumb question...the one cord looks like you plug a standard outlet in to it....(usa type) 3 prong plug...the other outlet all the stuff is sideways --- type

i assume a simple cord to extend to standard 3 prong plug in usa is all that is needed should you want to run the power supplies at 120v/60 in usa
that comes with one of the pair of power supplies i may get?

and such a conversion plug to 220v for the --- plug on the other units power supply should i get that pair instead... such for running it at 220v

don't care which I will likely run it at 220v ..just wondering if I gonna get caught up with an 'odd' cable or have to have one made on the --- type plug

should i get that device for 220v usa that matches either of these plugs and with either unit...if so a link to such extensions would be helpful to just
get both ahead of time in that i've no idea which power supply pair will come with my unit (sept)

the 220v power outlet is fairly standard in USA i can put one of those in with no issue...just need to find out if i need something special to convert
the units power supply extension (this is from what I saw on the spec sheet quote

see below
Each SP30 package will include as a default 2 power cords according to the PSU vendor type: a SP30 with 2 Emerson PSUs will include 2 IEC C19-C14 power cords while a SP30 supporting Murata will have 2 IEC C13-C14 power cords

end quote


hope the above is clear? may as well be prepared for the extension to the 220v plug for both? (assuming I am from google figuring out the above cords shipped)

Searing

Yeah, but it always is a pain to switch everything in the pool settings thing so i thought a button "switch to this pool" would be nice.

You wouldn´t have to wait for the whole cgminer to restart again either.

Nearly as good as my SP10
+1 for the idea about switching pools easier, since you need to get off ghash lol

Take a lookt at my sp10



Also, i have a suggestion: You could add a button to the UI to switch pools from the ones in the list.

A normal PC power cord, which you can get for around 2$ usually.

For SP10 what kind of spec power cord do we need?

so.. do people who have already made the purchased get to choose which type of PSU to ship with?

or it's completely random?

Cheers,
QG

SP30 AC/DC Power Supply unit guidelines - SP30 PSU

Hosting will start after your physical device will be manufactured in September.

How long to get the host mining after buying the SP30 ?

If you really think that was FUD then it means that you will take the 0.5BTC bet for Neptunes shipping this month right?

TBH RoadStress I looked at the SP30 when they were 3 for $20K (April offer) and thought at the time that might be worth thinking about. I thought about it and decided against it because it was a pre-order and because of uncertainly around the price of BTC and the network hash rate. Then you did the GB for $4500 each and I thought … I am so glad I didn't go for that April deal because I would have been really screwed. Then you and Raskul started doing the team shill thing and intentionally spreading FUD around the other threads and I got less and less interested. Then … when you and Raskul started pulling the old 'get 'em while they last' act I realized that this was just another pump and dump. The SP30 may be an ok machine, and it might even produce a small return on my investment if I got lucky, but I'd never buy one from a company with associates like you and Raskul.

Sorry bud.

Yes, but only for you if you buy a SP30.


I know, but it's a ROI that suits you the best meaning that the ROI guarantee is only for the unit, not for shipping or PSUs or any additional costs that might occur to the customer and it's only a desperate way of selling the low efficiency and big weight spaghetti monsters because you know they won't sell otherwise. I am sure that even with the dumping price and with the ROI guarantee there won't be so many client available. 32kgs for 2.4Th/s is just a big joke.

I hate to be that guy (not really) but rockminer R60 plan guarantees ROI within 60 days or your money back.