[ANN] TeamRedMiner v0.10.10 - Ironfish/Kaspa/ZIL/Kawpow/Etchash and More - page 14.

Haik

newbie

Activity: 46

Merit: 0

How to config this miner to mine rvn plus zil?

weifa

sr. member

Activity: 776

Merit: 308

GeoCoin Developer - GIS Technologist

I see Etchash support was recently added in version 0.7.18. Just wondering if there is potential to add Ubqhash support to a future release? Ubqhash is another Ethash variant so should be similar process.

Here's some of the technical info: https://blog.ubiqsmart.com/introducing-ubqhash-8fa515befd7

Would adding Ubqhash to TRM be possible?

buraz11

jr. member

Activity: 113

Merit: 4

I have a problem getting the trm to mine nimiq in hiveos i keep getting this message when connecting to pools
Pool us.nimpool.io (PROXY) connection was closed by the pool.

slklylnlelt

newbie

Activity: 3

Merit: 0

To get into B mode when mining ravencoin, would you still put --eth_config=B or would it change to something else.

nik-qz

member

Activity: 66

Merit: 45

Quote from: Akyboy on March 20, 2021, 12:45:10 PM

Hi Guys

Is there way to setup this miner to overclock rx580 similar to phoenix miner ( -gt 68 -cclock 1130 -mclock 2200 -cvddc 850 -mvddc 850 )
I have tried adding this line but it doesn't work

see here for an example of the required programs and commands, if i'm not mistaken, the analogue of the -gt parameter, in TRM it is --eth_config=A which is selected by itself
https://bitcointalksearch.org/topic/m.56418010

Akyboy

jr. member

Activity: 90

Merit: 1

Hi Guys

Is there way to setup this miner to overclock rx580 similar to phoenix miner ( -gt 68 -cclock 1130 -mclock 2200 -cvddc 850 -mvddc 850 )
I have tried adding this line but it doesn't work

zelenui

newbie

Activity: 2

Merit: 0

Hi.
Why is there no miner development for 4G GPU. Algorithm that uses DDR4 processor memory. Lolminer was able to make it work even in the 440 epoch. The decline starts after the 430 epoch.
https://cdn1.radikalno.ru/uploads/2021/3/20/45f027ec9e2616ab14d04c57f5401700-full.jpg
https://cdn1.radikalno.ru/uploads/2021/3/20/91abcc88231830045fcef69cc6c1e68a-full.jpg

Littlegrand

jr. member

Activity: 104

Merit: 5

What is a good hashrate from TRM on haven with a RX570 4gb?

I am getting around 900h/s. Trying to tweak but not much seems to make a difference...

alizali

newbie

Activity: 197

Merit: 0

hi guys
i have RX470 4GB Sapphire (Elpida EDW4032BABG · 113-7E353FU-M78)
os: hiveos
OC: core1126 with 800~810MV memory:1900
miner: teamredminer
coin: RVN
i got 13.5 MH for GPU with 57C with fan 50~60% with 80-85 watt report on hiveos
(if i increase memory to 1975 i have 14.5 for each card but temperature goes up and not idle for me)

any suggestion for better hash with lower temperature?

thanks for your great opinion

reza_irani

newbie

Activity: 2

Merit: 0

Quote from: Littlegrand on March 18, 2021, 07:48:45 AM

Quote from: reza_irani on March 18, 2021, 06:57:25 AM

hi everyone
I've faced an issue recently
when I'm mining eth with team reader 0.8.0 on ethermine pool everything is ok but when I want to move to 2miners pool the bellow error appear
I'm mining with simple mining os and all configuration is ok

Pool asia-eth.2miners.com rpc method _mining.authorize_ timed out after 69 seconds. Reconnecting.

I've tried all pool addresses and SSL connection but the problem is still arise
can anyone help me?

Best to show your launch line with more information:)

Your line should look something like this for windows if thats what you are using:

teamredminer.exe -a ethash -o stratum+tcp://us-eth.2miners.com:2020 -u ADDRESS.MINERNAME -p x --enable_compute --watchdog_script

thanks
the lunch line is
-a ethash -o stratum+tcp://us-eth.2miners.com:2020 -u *****.$rigName -p x --api_listen --watchdog_script
in windows we need teamredminer.exe and enable_compute which is not necessary in Linux

I don't have any problem when mining on ethermine which this lunch line but on 2miners I have the error which I have mentioned

Cabeimac

newbie

Activity: 1

Merit: 0

Good afternoon everyone,

I was mining steadily with a solid rate of 200mh/s. I tried to overclock a bit more my cards but now I am not able to make RaveOs to recognise my seven cards. I have deleted all OC settings from the platform. Maybe there is something that I can set in order to reboot the miner every time my cards are not recognised?

Cards are not even recognised as "DEAD", they are just not being recognised by TRM nor RaveOs.

Many thanks in advance.

Kind regards,

Cabeimac.

Littlegrand

jr. member

Activity: 104

Merit: 5

Quote from: reza_irani on March 18, 2021, 06:57:25 AM

hi everyone
I've faced an issue recently
when I'm mining eth with team reader 0.8.0 on ethermine pool everything is ok but when I want to move to 2miners pool the bellow error appear
I'm mining with simple mining os and all configuration is ok

Pool asia-eth.2miners.com rpc method _mining.authorize_ timed out after 69 seconds. Reconnecting.

I've tried all pool addresses and SSL connection but the problem is still arise
can anyone help me?

Best to show your launch line with more information:)

Your line should look something like this for windows if thats what you are using:

teamredminer.exe -a ethash -o stratum+tcp://us-eth.2miners.com:2020 -u ADDRESS.MINERNAME -p x --enable_compute --watchdog_script

reza_irani

newbie

Activity: 2

Merit: 0

hi everyone
I've faced an issue recently
when I'm mining eth with team reader 0.8.0 on ethermine pool everything is ok but when I want to move to 2miners pool the bellow error appear
I'm mining with simple mining os and all configuration is ok

Pool asia-eth.2miners.com rpc method _mining.authorize_ timed out after 69 seconds. Reconnecting.

I've tried all pool addresses and SSL connection but the problem is still arise
can anyone help me?

lxspector

newbie

Activity: 3

Merit: 0

Is it possible to add the ability to switch mining from ETH to ZIL by a timer inside the miner, as implemented in Nanominer? Using a proxy is not good at all. Please make a syntax in which you can specify more than just the 0x address. but login for example from MRR [user.123456]. Lolminer removes the "." as a mistake

Littlegrand

jr. member

Activity: 104

Merit: 5

Quote from: nik-qz on March 15, 2021, 03:22:08 PM

Quote from: Littlegrand on March 15, 2021, 03:13:58 PM

That was the issue. Ive not used amdmemtweak. Do you use amdmemtweak or amdmemtweakxl? Would you have an example command line in windows for the 5700 for core/mem/volt?

Thanks

amdmemtweak for Polaris
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 0 --ref 30

amdmemtweakxl for Navi10 in test mode windows
https://fastpic.ru/view/114/2021/0315/_27af50bd914220b59f4a8176512eeeb5.png.html

Is there a way to set Navi/Polaris clocks/mem/volt from the command line such as(and this is made up):
amdmemtweakxl -i 0 --vddci 718 --mvdd 1264 --SOC 825

Thanks

nik-qz

member

Activity: 66

Merit: 45

Quote from: Littlegrand on March 15, 2021, 03:13:58 PM

That was the issue. Ive not used amdmemtweak. Do you use amdmemtweak or amdmemtweakxl? Would you have an example command line in windows for the 5700 for core/mem/volt?

Thanks

amdmemtweak for Polaris
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 0 --ref 30

amdmemtweakxl for Navi10 in test mode windows
https://fastpic.ru/view/114/2021/0315/_27af50bd914220b59f4a8176512eeeb5.png.html

Littlegrand

jr. member

Activity: 104

Merit: 5

Quote from: nik-qz on March 15, 2021, 02:34:19 PM

Quote from: Littlegrand on March 15, 2021, 02:28:28 PM

Quote from: nik-qz on March 15, 2021, 02:08:22 PM

Quote from: Littlegrand on March 15, 2021, 12:52:44 PM

I am trying to switch to TRM from Phoenix.

I am using Windows 10 Driver 20.11.1

This is my current config:
teamredminer.exe -a ethash -o stratum+tcp://pool -u EthAddress.Miner1 -p x -d 2,3,5 --enable_compute --eth_aggr_mode --fan_control=65::::20:80,65::::20:80,65::::20:80,65::::20:80,65::::20:80,65::::20:80

I use overdriven to change the cards clock/mem/volt

I have 1 RX5700Xt and 2 RX570. The rx570s work fine but when I start, TRM detects the 5700 DEAD for a while then starts loading the dag and then mines at around 1k/h second or so.

I am trying the suggested speeds of 1275 core, 1750mem and 850 volts.

Any ideas why this is doing it? This card can run up to 57mh/s on Phoenix

Thanks

when you use the AMD_Memory_Tweak or AMD_Memory_Tweak_XL program?, it must be run before the start of mining, so that it will enter the necessary parameters, if you run it during operation, then the 5700 video card will fall off (this is what happens to me), if this is not the case, try removing the --eth_aggr_mode parameter and instead choose a softer mode --eth_config=A

I am not using amdmemtweak, I flashed the bios and then I used the Overdriven GUI tool to change the core/mem/volt and started TRM. I have tried it without the --eth_aggr_mode and same thing.

then try not to run Overdriven GUI and see what happens
and also this program amdmemtweak is still needed, even if not for 5700 video cards, but for 570 by raising the -tref parameter that cannot be flashed into the BIOS
for video cards 5700 amdmemtweak can change the voltage parameters of the memory controller and the memory itself, as well as SOK

That was the issue. Ive not used amdmemtweak. Do you use amdmemtweak or amdmemtweakxl? I looked it up and most posts are for the GUI and/or just timings but I flashed the timings. Would you have an example command line in windows for the 5700 for core/mem/volt?

Thanks

nik-qz

member

Activity: 66

Merit: 45

Quote from: Littlegrand on March 15, 2021, 02:28:28 PM

Quote from: nik-qz on March 15, 2021, 02:08:22 PM

Quote from: Littlegrand on March 15, 2021, 12:52:44 PM

I am trying to switch to TRM from Phoenix.

I am using Windows 10 Driver 20.11.1

This is my current config:
teamredminer.exe -a ethash -o stratum+tcp://pool -u EthAddress.Miner1 -p x -d 2,3,5 --enable_compute --eth_aggr_mode --fan_control=65::::20:80,65::::20:80,65::::20:80,65::::20:80,65::::20:80,65::::20:80

I use overdriven to change the cards clock/mem/volt

I have 1 RX5700Xt and 2 RX570. The rx570s work fine but when I start, TRM detects the 5700 DEAD for a while then starts loading the dag and then mines at around 1k/h second or so.

I am trying the suggested speeds of 1275 core, 1750mem and 850 volts.

Any ideas why this is doing it? This card can run up to 57mh/s on Phoenix

Thanks

when you use the AMD_Memory_Tweak or AMD_Memory_Tweak_XL program?, it must be run before the start of mining, so that it will enter the necessary parameters, if you run it during operation, then the 5700 video card will fall off (this is what happens to me), if this is not the case, try removing the --eth_aggr_mode parameter and instead choose a softer mode --eth_config=A

I am not using amdmemtweak, I flashed the bios and then I used the Overdriven GUI tool to change the core/mem/volt and started TRM. I have tried it without the --eth_aggr_mode and same thing.

then try not to run Overdriven GUI and see what happens
and also this program amdmemtweak is still needed, even if not for 5700 video cards, but for 570 by raising the -tref parameter that cannot be flashed into the BIOS
for video cards 5700 amdmemtweak can change the voltage parameters of the memory controller and the memory itself, as well as SOK

Littlegrand

jr. member

Activity: 104

Merit: 5

Quote from: nik-qz on March 15, 2021, 02:08:22 PM

Quote from: Littlegrand on March 15, 2021, 12:52:44 PM

I am trying to switch to TRM from Phoenix.

I am using Windows 10 Driver 20.11.1

This is my current config:
teamredminer.exe -a ethash -o stratum+tcp://pool -u EthAddress.Miner1 -p x -d 2,3,5 --enable_compute --eth_aggr_mode --fan_control=65::::20:80,65::::20:80,65::::20:80,65::::20:80,65::::20:80,65::::20:80

I use overdriven to change the cards clock/mem/volt

I have 1 RX5700Xt and 2 RX570. The rx570s work fine but when I start, TRM detects the 5700 DEAD for a while then starts loading the dag and then mines at around 1k/h second or so.

I am trying the suggested speeds of 1275 core, 1750mem and 850 volts.

Any ideas why this is doing it? This card can run up to 57mh/s on Phoenix

Thanks

when you use the AMD_Memory_Tweak or AMD_Memory_Tweak_XL program?, it must be run before the start of mining, so that it will enter the necessary parameters, if you run it during operation, then the 5700 video card will fall off (this is what happens to me), if this is not the case, try removing the --eth_aggr_mode parameter and instead choose a softer mode --eth_config=A

I am not using amdmemtweak, I flashed the bios and then I used the Overdriven GUI tool to change the core/mem/volt and started TRM. I have tried it without the --eth_aggr_mode and same thing.

nik-qz

member

Activity: 66

Merit: 45

Quote from: Littlegrand on March 15, 2021, 12:52:44 PM

I am trying to switch to TRM from Phoenix.

I am using Windows 10 Driver 20.11.1

This is my current config:
teamredminer.exe -a ethash -o stratum+tcp://pool -u EthAddress.Miner1 -p x -d 2,3,5 --enable_compute --eth_aggr_mode --fan_control=65::::20:80,65::::20:80,65::::20:80,65::::20:80,65::::20:80,65::::20:80

I use overdriven to change the cards clock/mem/volt

I have 1 RX5700Xt and 2 RX570. The rx570s work fine but when I start, TRM detects the 5700 DEAD for a while then starts loading the dag and then mines at around 1k/h second or so.

I am trying the suggested speeds of 1275 core, 1750mem and 850 volts.

Any ideas why this is doing it? This card can run up to 57mh/s on Phoenix

Thanks

when you use the AMD_Memory_Tweak or AMD_Memory_Tweak_XL program?, it must be run before the start of mining, so that it will enter the necessary parameters, if you run it during operation, then the 5700 video card will fall off (this is what happens to me), if this is not the case, try removing the --eth_aggr_mode parameter and instead choose a softer mode --eth_config=A

Topic: [ANN] TeamRedMiner v0.10.10 - Ironfish/Kaspa/ZIL/Kawpow/Etchash and More - page 14. (Read 211432 times)