[ANN] TeamRedMiner v0.10.10 - Ironfish/Kaspa/ZIL/Kawpow/Etchash and More - page 9.

nik-qz

member

Activity: 66

Merit: 45

Quote from: nik-qz on September 07, 2021, 04:33:48 AM

launched a farm profile that worked on version 8.4 to version 8.5 and shows some kind of error -8 on one of the 5700 video cards with ADL fan control and will not start, I had to return version 8.4

when activating the option --fan_control = 63 ::: 50: 1: 90 in version 8.5, the program does not start if there are 5700 video cards , fix it otherwise it is impossible to control the fans

abg00

jr. member

Activity: 288

Merit: 1

Team Red Miner v0.8.5 release

nik-qz

member

Activity: 66

Merit: 45

launched a farm profile that worked on version 8.4 to version 8.5 and shows some kind of error -8 on one of the 5700 video cards with ADL fan control and will not start, I had to return version 8.4

Trietch

newbie

Activity: 6

Merit: 0

Quote from: bghaemi on July 07, 2021, 07:10:00 AM

Quote from: nik-qz on June 16, 2021, 12:30:45 AM

Quote from: Trietch on June 13, 2021, 06:24:36 AM

Hello, since the v0.8.2 update I keep getting "GPU 2 : detected DEAD" every hour on my stable rig.
When I look at the log, the card is still at normal hashrate when detected DEAD Undecided

Tried to reduce overclock and increase voltage, still having this issue.

Can this be caused by the miner detecting the card DEAD when it's not? Thanks Cheesy

you can check the usb cables, riser and finally reinstall the driver

I got the same issue on GPU0, despite of changed all hardware (Rizer, Cable, Motherboard, Power Supply) also the AMD driver from 18.6.1 to 20.11.2 but still was getting Dead GPU message.
Finally downgraded to v0.8.2 and continue mining ETH without hassle.

Finally it was a power cable problem. So everything is fine for me with v0.8.3 Grin

nik-qz

member

Activity: 66

Merit: 45

hi
is this behavior of the TRM miner normal? a lot of jobs are received per second all the time, while on the same pool if I run another miner, for example trex for nvidia, there are no such problems there work is done at normal speed

SergeySS

newbie

Activity: 15

Merit: 0

Quote from: GKumaran on August 20, 2021, 07:24:51 AM

Quote from: SergeySS on August 19, 2021, 03:47:32 AM

Can't connect to pool nicehash

teamredminer.exe -a autolykos2 -o stratum+tcp://autolykos.eu.nicehash.com:3390 -u xxxxxxx.3 -p x

[2021-08-19 10:41:23] Runtime Command Keys: h - help, s - stats, e - enable gpu, d - disable gpu, q - quit
[2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com connecting to address 172.65.200.133.
[2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com successfully connected to address 172.65.200.133.
[2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com connection was closed due to an error.
[2021-08-19 10:41:43] Shutting down...

The stratum for autolykos is :
stratum+tcp://autolykos.eu-west.nicehash.com:3390
stratum+tcp://autolykos.eu-north.nicehash.com:3390

https://www.nicehash.com/stratum-generator

Thanks for the link, it works with it

GKumaran

member

Activity: 204

Merit: 10

Quote from: SergeySS on August 19, 2021, 03:47:32 AM

Can't connect to pool nicehash

teamredminer.exe -a autolykos2 -o stratum+tcp://autolykos.eu.nicehash.com:3390 -u xxxxxxx.3 -p x

[2021-08-19 10:41:23] Runtime Command Keys: h - help, s - stats, e - enable gpu, d - disable gpu, q - quit
[2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com connecting to address 172.65.200.133.
[2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com successfully connected to address 172.65.200.133.
[2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com connection was closed due to an error.
[2021-08-19 10:41:43] Shutting down...

The stratum for autolykos is :
stratum+tcp://autolykos.eu-west.nicehash.com:3390
stratum+tcp://autolykos.eu-north.nicehash.com:3390

https://www.nicehash.com/stratum-generator

SergeySS

newbie

Activity: 15

Merit: 0

Quote from: XUR_TIP on August 19, 2021, 04:49:28 AM

Quote from: SergeySS on August 19, 2021, 03:47:32 AM

Can't connect to pool nicehash

teamredminer.exe -a autolykos2 -o stratum+tcp://autolykos.eu.nicehash.com:3390 -u xxxxxxx.3 -p x

[2021-08-19 10:41:23] Runtime Command Keys: h - help, s - stats, e - enable gpu, d - disable gpu, q - quit
[2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com connecting to address 172.65.200.133.
[2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com successfully connected to address 172.65.200.133.
[2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com connection was closed due to an error.
[2021-08-19 10:41:43] Shutting down...

How do you set this up? Are you mining through windows OS or hiveOS? I got better performance connecting to nicehash pool through HiveOS, the OS already have nicehash settings in place already, when trying to add wallet search nicehash instead

Windows 10

XUR_TIP

member

Activity: 227

Merit: 24

Quote from: SergeySS on August 19, 2021, 03:47:32 AM

Can't connect to pool nicehash

teamredminer.exe -a autolykos2 -o stratum+tcp://autolykos.eu.nicehash.com:3390 -u xxxxxxx.3 -p x

[2021-08-19 10:41:23] Runtime Command Keys: h - help, s - stats, e - enable gpu, d - disable gpu, q - quit
[2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com connecting to address 172.65.200.133.
[2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com successfully connected to address 172.65.200.133.
[2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com connection was closed due to an error.
[2021-08-19 10:41:43] Shutting down...

How do you set this up? Are you mining through windows OS or hiveOS? I got better performance connecting to nicehash pool through HiveOS, the OS already have nicehash settings in place already, when trying to add wallet search nicehash instead

Zotak337

member

Activity: 232

Merit: 10

Quote from: abrgeza on August 13, 2021, 07:22:21 AM

Quote from: Stanlo on August 07, 2021, 03:39:44 AM

I'm still getting low hashrate on my Vega 56 with max settings of core 930 mem clock 900 and 840mv any thing higher than this the GPU will crash in hiveOS, my hashrate is 44mH and here is the tweak settings I use

amdmemtweak --cl 18 --ras 23 --rcdrd 22 --rcdwr 11 --rc 34 --rp 13 --rrds 3 --rrdl 4 --rtp 6 --faw 12 --cwl 7 --wtrs 4 --wtrl 4 --wr 11 --rfc 164 --REF 15000

The memory is hynix memory

44MH/s is not bad. For anything higher you need to raise core clock to 1000MHz or more and mem clock.
Hynix is not good for overclocking on vega56 cards. If you can flash vega64 bios do it and raise mem clock to 950-1000MHz.
Try to lower --rcdrd as much as you can.
This is a basic settings for hynix memory: --RAS 24 --RCDRD 19 --RCDWR 4 --RC 35 --RP 13 --RRDS 4 --RRDL 5 --RFC 148 --REF 15600

Whoever you are thank you, I have a hynix Vega 56 and that RCDRD 19 fixed my issue I am able to get extra hashrate now and also less temp on memory, I will try the others as well 👍👍

SergeySS

newbie

Activity: 15

Merit: 0

Can't connect to pool nicehash

teamredminer.exe -a autolykos2 -o stratum+tcp://autolykos.eu.nicehash.com:3390 -u xxxxxxx.3 -p x

[2021-08-19 10:41:23] Runtime Command Keys: h - help, s - stats, e - enable gpu, d - disable gpu, q - quit
[2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com connecting to address 172.65.200.133.
[2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com successfully connected to address 172.65.200.133.
[2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com connection was closed due to an error.
[2021-08-19 10:41:43] Shutting down...

abrgeza

jr. member

Activity: 117

Merit: 2

Quote from: Stanlo on August 07, 2021, 03:39:44 AM

I'm still getting low hashrate on my Vega 56 with max settings of core 930 mem clock 900 and 840mv any thing higher than this the GPU will crash in hiveOS, my hashrate is 44mH and here is the tweak settings I use

amdmemtweak --cl 18 --ras 23 --rcdrd 22 --rcdwr 11 --rc 34 --rp 13 --rrds 3 --rrdl 4 --rtp 6 --faw 12 --cwl 7 --wtrs 4 --wtrl 4 --wr 11 --rfc 164 --REF 15000

The memory is hynix memory

44MH/s is not bad. For anything higher you need to raise core clock to 1000MHz or more and mem clock.
Hynix is not good for overclocking on vega56 cards. If you can flash vega64 bios do it and raise mem clock to 950-1000MHz.
Try to lower --rcdrd as much as you can.
This is a basic settings for hynix memory: --RAS 24 --RCDRD 19 --RCDWR 4 --RC 35 --RP 13 --RRDS 4 --RRDL 5 --RFC 148 --REF 15600

smilodon

member

Activity: 124

Merit: 10

Quote from: jiang80s on July 10, 2021, 06:45:53 AM

Hi,
I have some issues when using for xhv coin under linux ( RaveOS) comparing with windows.
Under linux my baffin cards like RX 550 2Gb, RX 560 2Gb works only 300 h/s. But it will get 500 h/s more in windows, with same core, mem, and voltage.
Let me know the problem and how to solve it.
Thank you.

try cn_config=6+0AAA 400+ hash its driver bug on baffin.

GKumaran

member

Activity: 204

Merit: 10

Quote from: MegaVlad on August 05, 2021, 01:44:33 PM

Hi
Trying to mine on RaveOS (8708-1983), on TRM 0.8.4 and I get "Bus error".
Lol miner, Phoenix work fine on my rig. Can developers explain such behaviour of TRM 0.8.4?
Thank you in advance. Shocked

It should work fine, i have a feeling raveos is using a diff bus ordering. But it seems like an ez and already solved bug ni rave os if any. Try asking the rave os devs

GKumaran

member

Activity: 204

Merit: 10

Quote from: Cryptoseekert on July 12, 2021, 05:42:34 AM

Quote from: Bokiman on May 26, 2021, 02:25:32 AM

Quote from: Cryptoseekert on May 22, 2021, 07:39:56 PM

Hello guys

i hope you are all doing good

one question:

for ravencoin mining on windows 10, amd rx 570 4gb, what is the best way to control fans, voltages and clocks?

can i do it from the miner (like eth mining on phoenix or old claymore, where i can control temps, fans, etc via a command)

thanks

As far as I know, you cant control voltage and clocks,.. I do it throug OverdriveNTool program.

hi good sir, sorry to bother you.

ive been using overdriveNtool, but when i have a power cut problem or something, and the rig restarts, it will restart on the default clocks, not the overdrive ones.
how can i set them auto at win start?
thanks Cheesy

You can setup overdriventool via its cli commands, once you have a working bat file, set it to autorun on boot via Windows Task Scheduler

Stanlo

full member

Activity: 952

Merit: 110

I'm still getting low hashrate on my Vega 56 with max settings of core 930 mem clock 900 and 840mv any thing higher than this the GPU will crash in hiveOS, my hashrate is 44mH and here is the tweak settings I use

amdmemtweak --cl 18 --ras 23 --rcdrd 22 --rcdwr 11 --rc 34 --rp 13 --rrds 3 --rrdl 4 --rtp 6 --faw 12 --cwl 7 --wtrs 4 --wtrl 4 --wr 11 --rfc 164 --REF 15000

The memory is hynix memory

micax1

hero member

Activity: 708

Merit: 502

Quote from: jiang80s on July 10, 2021, 06:45:53 AM

Hi,
I have some issues when using for xhv coin under linux ( RaveOS) comparing with windows.
Under linux my baffin cards like RX 550 2Gb, RX 560 2Gb works only 300 h/s. But it will get 500 h/s more in windows, with same core, mem, and voltage.
Let me know the problem and how to solve it.
Thank you.

Do you use auto-tune?
Check your auto-tune settings that miner finds. are they same?
if they are not post it here - so we can compare.

MegaVlad

newbie

Activity: 24

Merit: 1

Hi
Trying to mine on RaveOS (8708-1983), on TRM 0.8.4 and I get "Bus error".
Lol miner, Phoenix work fine on my rig. Can developers explain such behaviour of TRM 0.8.4?
Thank you in advance. Shocked

SamaelDNM

member

Activity: 732

Merit: 18

New exchange generation

Quote from: PeaMine on July 16, 2021, 12:02:33 AM

Any ETA on support for 21.6.2 or 21.7.1 ? It supports Smart Memory and such.
XT series seems to work, but not Radeon VII, failed to initialize device.
Downgrading works though, but I like the new features for gaming.

i just saw there is an update already, it works for my rx 580 the drive version 21.7.1

https://github.com/todxx/teamredminer/releases/tag/v0.8.4

PeaMine

hero member

Activity: 979

Merit: 510

Any ETA on support for 21.6.2 or 21.7.1 ? It supports Smart Memory and such.
XT series seems to work, but not Radeon VII, failed to initialize device.
Downgrading works though, but I like the new features for gaming.

Topic: [ANN] TeamRedMiner v0.10.10 - Ironfish/Kaspa/ZIL/Kawpow/Etchash and More - page 9. (Read 211380 times)