[ANN] TeamRedMiner v0.10.10 - Ironfish/Kaspa/ZIL/Kawpow/Etchash and More - page 17.

nik-qz

member

Activity: 66

Merit: 45

Quote from: OrangePower on February 20, 2021, 03:07:56 PM

Quote from: nik-qz on February 09, 2021, 01:01:33 PM

Quote from: OrangePower on February 08, 2021, 08:35:39 AM

Hi

I`m new to mining with TRM and I want to try it.

How do I setup TRM with these options I have in phoenix miner?

I`m using 8pcs rx580 8GB cards with hynix memory and i`m getting 32mhs in phoenixminer with this setup:

-lidag 2 -tt 55 -fanmin 40 -fanmax 75 -rxboost 1 -cclock 1200 -mclock 2250 -cvddc 840 -mvddc 860 -r 1

Thank you for help!

C:\Miner\AMD_Memory\WinAMDTweak.exe --i 0 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 1 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 2 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 3 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 4 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 5 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 6 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 7 --ref 30

C:\Miner\ATIWinFlashBios2.9.3\OverdriveNTool2.9.exe -ac1 GPU_P7=1200;840 MEM_P2=2250;860 -ac2 GPU_P7=1200;840 MEM_P2=2250;860 -ac3 GPU_P7=1200;840 MEM_P2=2250;860 -ac4 GPU_P7=1200;840 MEM_P2=2250;860 -ac5 GPU_P7=1200;840 MEM_P2=2250;860 -ac6 GPU_P7=1200;840 MEM_P2=2250;860 -ac7 GPU_P7=1200;840 MEM_P2=2250;860 -ac8 GPU_P7=1200;840 MEM_P2=2250;860

the countdown starts with -ac1 if you have a graphics core built into the processor, or with -ac0 if there is none

C:\Miner\TeamRedMiner\teamredminer.exe --enable_compute --uac -a ethash --pool_force_ensub -o stratum+tcp://your_pool:port -u 0x***********.your_name_rig -p x --init_style=1 or 2 or 3 --eth_dag_slowdown=4 (0-9 similar to -lidag) --eth_worker your_name_rig --eth_stratum_mode=(ethproxy or nicehash or stratum) --eth_variant_mode=ethash --eth_alloc_epoch=10 --eth_config=A --temp_limit=63 --temp_resume=50 --fan_control=58:70:80:50:1:100 --fan_default_polaris=58:70:80:50:1:100

where --fan_control=core:junc:mem:fan start:fan min:fan max

Thank you for advice but I cant set up miner, one big problem is that google translate does not translate from rusian language.

I see that I need one SW for setting tunning and then miner to mine. But in miner there is also a lot of options activated and I dont know if I must use all of them.

you will need several programs in this minus TRM, but otherwise only pluses, the ATI driver is not higher than 20.5.1 otherwise OverdriveNTool2. 9 will not work, all the commands in this file are described USAGE.txt, also, before starting, you will need to run the file register windows_tdr_fix.reg once , an example of the commands below. The presented commands are almost the minimum necessary set, i.e. it is better to use them

Littlegrand

jr. member

Activity: 104

Merit: 5

Quote from: Dr_Victor on February 22, 2021, 02:00:47 PM

Quote from: Littlegrand on February 21, 2021, 06:49:02 AM

Ive bought a new card (have not in a long time) and was wondering where people get there bios mods now? The site I used before is no longer active.

Thanks

People can mod their cards by Red BIOS Editor.

I looked it up but I am not sure the average person such as myself would have any clue what to do and therefore could damage a card easily. There used to be sites where people had your card/memory type bios posted and you could download a bios(all rated) and flash that one. I take it these do not exist any longer?

Thanks

Dr_Victor

sr. member

Activity: 954

Merit: 250

Quote from: Littlegrand on February 21, 2021, 06:49:02 AM

Ive bought a new card (have not in a long time) and was wondering where people get there bios mods now? The site I used before is no longer active.

Thanks

People can mod their cards by Red BIOS Editor.

Danz0r77

hero member

Activity: 574

Merit: 504

Who had a thread with a problem with a constant miner crash?

Littlegrand

jr. member

Activity: 104

Merit: 5

Ive bought a new card (have not in a long time) and was wondering where people get there bios mods now? The site I used before is no longer active.

Thanks

powvex

newbie

Activity: 47

Merit: 0

Im using this miner for my ravencoins. is there any way I could read gpu temps from web service or my server ip remotely?

filo1992

newbie

Activity: 32

Merit: 0

Hi, I'm trying TRM, but I can't keep coreclock and vddc constants.

and why is socMHZ at 0?

for gpu settings use overdrive

https://ibb.co/646vdkY

OrangePower

newbie

Activity: 2

Merit: 0

Quote from: nik-qz on February 09, 2021, 01:01:33 PM

Quote from: OrangePower on February 08, 2021, 08:35:39 AM

Hi

I`m new to mining with TRM and I want to try it.

How do I setup TRM with these options I have in phoenix miner?

I`m using 8pcs rx580 8GB cards with hynix memory and i`m getting 32mhs in phoenixminer with this setup:

-lidag 2 -tt 55 -fanmin 40 -fanmax 75 -rxboost 1 -cclock 1200 -mclock 2250 -cvddc 840 -mvddc 860 -r 1

Thank you for help!

лeнь пepeвoдить coopeнтиpyйтecь caми, вaм пoтpeбyeтcя pяд пpoгpaмм в этoм минyc TRM, нo в ocтaльнoм тoлькo плюcы, дpaйвep ATI нe вышe 20.5.1 инaчe нe бyдeт paбoтaть OverdriveNTool2.9, вce кoмaнды oпиcaны в фaйлe USAGE.txt, тaк жe пepeд зaпycкoм пoтpeбyeтcя зaпycтить oдин paз фaйл peгиcтp windows_tdr_fix.reg, пpимep кoмaнд нижe

C:\Miner\AMD_Memory\WinAMDTweak.exe --i 0 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 1 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 2 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 3 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 4 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 5 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 6 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 7 --ref 30

C:\Miner\ATIWinFlashBios2.9.3\OverdriveNTool2.9.exe -ac1 GPU_P7=1260;887 MEM_P2=2300;750 -ac2 GPU_P7=1240;1000 MEM_P2=2280;750 -ac3 GPU_P7=1240;875 MEM_P2=2300;750 -ac4 GPU_P7=1260;1000 MEM_P2=2300;750 -ac5 GPU_P7=1240;1006 MEM_P2=2300;750 -ac6 GPU_P7=1240;1000 MEM_P2=2300;750 -ac7 GPU_P7=1240;905 MEM_P2=2280;750 -ac8 GPU_P7=1240;987 MEM_P2=2280;750

C:\Miner\TeamRedMiner\teamredminer.exe --enable_compute --uac -a ethash --pool_force_ensub -o stratum+tcp://your_pool:port -u 0x***********.your_name_rig -p x --init_style=1 or 2 or 3 --eth_dag_slowdown=4 (0-9 similar to -lidag) --eth_worker your_name_rig --eth_stratum_mode=(ethproxy or nicehash or stratum) --eth_variant_mode=ethash --eth_alloc_epoch=10 --eth_config=A --temp_limit=63 --temp_resume=50 --fan_control=58:70:80:50:1:100 --fan_default_polaris=58:70:80:50:1:100
гдe --fan_control=core:junc:mem:fan start:fan min:fan max

Thank you for advice but I cant set up miner, one big problem is that google translate does not translate from rusian language.

I see that I need one SW for setting tunning and then miner to mine. But in miner there is also a lot of options activated and I dont know if I must use all of them.

Riptide_NVN

member

Activity: 294

Merit: 16

Hi team. Sorry for the ignorant question.

When downloading the miner client archive file from git there doesn't seem to be any checksums to compare against. Is there any way to verify the file is valid? I am running on a personal computer and not a rig so am trying to be as careful as I can be to avoid malware.

TIA

slklylnlelt

newbie

Activity: 3

Merit: 0

I switched my rig over from ETH a week ago to try ravencoin out, got teamredminer. I have 3 RX480 8GB and they are running at 9.6, 9.6, and 13.3 MH/s. I have been seeing that the 480 4GB get about this same hashrate, so its making me wondering if mine is a bit low. I tried putting them in mode B, but the stats are showing A576 for each. This is my bat file:

teamredminer.exe -a kawpow -o stratum+tcp://us-solo-rvn.2miners.com:7070 -u RBtMNRyq2QxJxF***fuLJ1WENbdjWzw.cryptodyne -p x --cn_config 9+9 --prog_config=B576 --enable_compute

Am i missing something or doing something stupid?
thanks

https://prnt.sc/100d6vw

peterboy1

newbie

Activity: 168

Merit: 0

Have anyone get a lot of stales in eth sparkpool? Jobs are coming too fast. My latency is fine. Is there any remedy?

ivomm

legendary

Activity: 1891

Merit: 3096

All good things to those who wait

I can't make TRM kawpow to work for RX 560 cards on SMOS. It starts with 0 hash no matter the OC values. Is there a way to make it work?

lncm

member

Activity: 388

Merit: 13

CN/R is the algo, coin is Lethean.

FP91G

legendary

Activity: 1834

Merit: 1131

Quote from: lncm on February 15, 2021, 04:27:36 PM

Quote from: lncm on February 13, 2021, 02:18:27 PM

Hi there, help me here with linux version.

Using Mint 20.1, Vega 56, amdgpu-pro 20.45.

Trying to mine a cnr coin, but all I get is

Code:

~/teamredminer-v0.8.1-linux$ ./start_cnr.sh
          Team Red Miner version 0.8.1
[2021-02-13 19:04:22] Failed to list OpenCL platforms.
[2021-02-13 19:04:22] Successful clean shutdown.

Are those AMD drivers not supported?

Thanks.

Anyone? It's a bit annoying to have to use windows to mine. Embarrassed

Have you tried mining other coins?
If they have the same error, then download the latest hive os for AMD Vega
https://hiveos.farm/install/
What is cnr coin Huh

I didn't find it in the list of coins to mine

lncm

member

Activity: 388

Merit: 13

Quote from: lncm on February 13, 2021, 02:18:27 PM

Hi there, help me here with linux version.

Using Mint 20.1, Vega 56, amdgpu-pro 20.45.

Trying to mine a cnr coin, but all I get is

Code:

~/teamredminer-v0.8.1-linux$ ./start_cnr.sh
          Team Red Miner version 0.8.1
[2021-02-13 19:04:22] Failed to list OpenCL platforms.
[2021-02-13 19:04:22] Successful clean shutdown.

Are those AMD drivers not supported?

Thanks.

Anyone? It's a bit annoying to have to use windows to mine. Embarrassed

FP91G

legendary

Activity: 1834

Merit: 1131

I have the same problem. I upgraded BIOS 3 times. After increasing the memory frequencies I have a lot of rejected shares.
MSI Armor RX470 4Gb . TeamRedMiner latest ver.Hive OS.
If you have any proven straps or bios, please share.

Guigs321

newbie

Activity: 41

Merit: 0

Quote from: Sebahl on February 14, 2021, 10:45:44 AM

What are the overclock setting you guys are using for RX470/480/570/580 for KAWPOW?

1100 Mhz for GPU, 2000 Mhz for VRAM, you have to wait a little before the Mh/s stabilize.

Sebahl

jr. member

Activity: 146

Merit: 4

What are the overclock setting you guys are using for RX470/480/570/580 for KAWPOW?

Guigs321

newbie

Activity: 41

Merit: 0

Quote from: Dowper_ on February 14, 2021, 05:29:58 AM

RX580 4GB (Kawpow Hashrate) with TRM - https://www.youtube.com/watch?v=Otl0MwZcbuU

I switched since a week all my RX470 4GB on Ravencoin, around 13,8 Mh/s for each.

Dowper_

member

Activity: 221

Merit: 12

RX580 4GB (Kawpow Hashrate) with TRM - https://www.youtube.com/watch?v=Otl0MwZcbuU

Topic: [ANN] TeamRedMiner v0.10.10 - Ironfish/Kaspa/ZIL/Kawpow/Etchash and More - page 17. (Read 211903 times)