Pages:
Author

Topic: [ANN] TeamRedMiner v0.10.10 - Ironfish/Kaspa/ZIL/Kawpow/Etchash and More - page 21. (Read 211432 times)

jr. member
Activity: 98
Merit: 6
2-nd day mining ETH with TRM:

Polaris 8GB - uptime 30h @ 30+ MH/s and power consumption is low!  Good job!

Polaris 4GB - crash after crash after hang after crash and so on...
Rig is not broken: tested it with ETC and all good.
Can someone please share basic Linux command line and oc/uv settings for 4GB RX470/570 cards to mine ETH?

For mining Ethereum on 4 GB cards I recommend lolminer. My rig also crashes random within 5-15 mins with TRM on 4 GB cards.
newbie
Activity: 142
Merit: 0
2-nd day mining ETH with TRM:

Polaris 8GB - uptime 30h @ 30+ MH/s and power consumption is low!  Good job!

Polaris 4GB - crash after crash after hang after crash and so on...
Rig is not broken: tested it with ETC and all good.
Can someone please share basic Linux command line and oc/uv settings for 4GB RX470/570 cards to mine ETH?
jr. member
Activity: 148
Merit: 5
I cant get proper hashrate on the GPU connected to the monitor.
That one gets 1mhs, while the others get 53mh/s.

(3x 5700xt, win10, latest amd driver)

If you have to leave the gpu connected to the monitor, add argument --eth_big_mode_adjust=1024. It's a resolution issue and the miner can overallocate VRAM unless you add this argument. Will be addressed in a future release.
full member
Activity: 1264
Merit: 138
I cant get proper hashrate on the GPU connected to the monitor.
That one gets 1mhs, while the others get 53mh/s.

(3x 5700xt, win10, latest amd driver)

If you have an igpu on the proc/mobo use it and mine on the gpus. 
legendary
Activity: 1796
Merit: 1028
I'm using Claymore monitoring API and every few days on several LInux rigs I have error "CM API Maximum connection limit reached, closing new connection". Miner is working but monitoring is stopped. What is the problem?
Get this error on Windows too

CM API MAXIMUM CONNECTION LIMIT REACHED ERROR--

I get this same error.  The result is a redline in EthMan, reporting a dead miner.  However, TRM is functional and mining on the reported rig.  This is a bug!  Can it be removed, or turned off with a command line flag?

--scryptr
hero member
Activity: 968
Merit: 624
Still a manic miner
I cant get proper hashrate on the GPU connected to the monitor.
That one gets 1mhs, while the others get 53mh/s.

(3x 5700xt, win10, latest amd driver)
newbie
Activity: 41
Merit: 0
I'm using Claymore monitoring API and every few days on several LInux rigs I have error "CM API Maximum connection limit reached, closing new connection". Miner is working but monitoring is stopped. What is the problem?
Get this error on Windows too
member
Activity: 618
Merit: 21
I'm using Claymore monitoring API and every few days on several LInux rigs I have error "CM API Maximum connection limit reached, closing new connection". Miner is working but monitoring is stopped. What is the problem?
newbie
Activity: 6
Merit: 0
I cannot seem to start TRM with my setup. I have a mixed rig, I wanted to use TRM and T-REX respectively for each set of cards. Right now I am using lolminer that is handling all cards with no issues, but perhaps unoptimally.

I get a failed to initialize device error. If I list devices I seem to get them all.

          Team Red Miner version 0.8.0
[2021-01-27 00:52:56] Auto-detected AMD OpenCL platform 1
[2021-01-27 00:53:04] Initializing GPU 0.
[2021-01-27 00:53:04] Failed to initialize device idx 0 (-13)
[2021-01-27 00:53:04] Successful clean shutdown.

.\teamredminer.exe --list_devices
          Team Red Miner version 0.8.0
[2021-01-27 00:54:25] Auto-detected AMD OpenCL platform 1
[2021-01-27 00:54:30] Detected 3 devices, listed in pcie bus id order:
[2021-01-27 00:54:30] Miner Platform OpenCL BusId    Name          Model                     Nr CUs
[2021-01-27 00:54:30] ----- -------- ------ -------- ------------- ------------------------- ------
[2021-01-27 00:54:30]     0        1      1 03:00.0  gfx900        Radeon RX Vega                64
[2021-01-27 00:54:30]     1        1      2 06:00.0  gfx1010       AMD Radeon RX 5700 XT         20
[2021-01-27 00:54:30]     2        1      0 10:00.0  gfx1030       AMD Radeon RX 6800 XT         36
[2021-01-27 00:54:30] Successful clean shutdown.

Any idea what's up?
hero member
Activity: 711
Merit: 500
Have anyone got any gains on RX5700? I find Poenix to be better here
For me, the hashrate has remained the same, but electricity consumption has been reduced. I have 310 MH / s for 6 x MSI 5700XT GAMING X, the power consumption measured in the socket is about 770 - 780 W.
newbie
Activity: 24
Merit: 0
Upgraded to TRM 0.8.0, then discovered I had to upgrade my AMD driver from 20.4.2, too, in order to get the new config mode B work with my RX5700s.
Then discovered I had to upgrade Overdriventool from 0.2.8 to 0.2.9, since the old version didn't work with the newer driver.  
I tried AMD driver version 20.9.1, since that was the lowest recommended, but found this to be flaky.  And overdriventool would not apply settings.  In the end I reverted back to AMD driver 20.4.2 and am now running the miner with A576 config on all my RX5700s.



amd driver 20.5.1 works with overdriventool 0.2.9.  So this will all work with TRM 0.8.0
newbie
Activity: 142
Merit: 0
Hello everyone!

First day with TRM  Smiley
Can I use Phoenix settings with my RX470 8GB Samsung rigs or can I get more energy saving & shares with different settings?
Atm using B-mode  1106/2100 @ 868mV  (was rock stabla with Phoenix)

And what about RX470 4GB Elpida/Hynix rig?
Atm using max_alloc 4076   1106/1900 @ 850mV

OS: SMOS 5.4.52-sm10
Driver: amd20.30r5.6.7
legendary
Activity: 1766
Merit: 1002
dang rig drop 50watt on 8 vegas config with small bump on hashrate, need new ont v3.1b to support newer amd driver

lets see how stable this new version, hopefully no weird happen, any news on rx6000 series from TRM support?
member
Activity: 66
Merit: 45
How to use this option in SMOS
Quote
--fan_control(=CFG1,CFG2,...)
example
--fan_control=61:::50:1:100 --fan_default_polaris=61:::50:1:100 --fan_default_navi=61:80:80:50:1:100

--fan_control=core:junc:mem:start fan:min fan:max fan
newbie
Activity: 61
Merit: 0
gyus i mine with a 5700 xt but i get low hashrate about 18 mhs why?i mine in win 10,team red miner 0.8.
newbie
Activity: 24
Merit: 1
Hello!

What commands can be used to set the core and memory voltages in the TRM 8.0? (With no third party utilities). For example, Phoenix has very convenient commands -cvddc  -mvddc.
newbie
Activity: 21
Merit: 0
How to use this option in SMOS
Quote
--fan_control(=CFG1,CFG2,...)
newbie
Activity: 55
Merit: 0
Have anyone got any gains on RX5700? I find Poenix to be better here
member
Activity: 66
Merit: 45
The power consumption on version 0.8 on Polaris video cards is excellent! returned to the values that were before the 4-gigabit DAG
chicardos
member
Activity: 317
Merit: 12
I have about 95 mh/s on Windows with my Radeon VII, have not played much with timings as I think this quite good. But is it worth moving to Linux? If so, which one? Not sure I'm ready to pay for anyting.

which country do you buy your radeon vii?

I bought mine on Ebay, early this autum (10x). 11x was 3060 TI. It's impossible to almost buy any new gpu these days.
yeah thats why I am having to make do with rx 580 and 480
Pages:
Jump to: