Using R-Mode with 5700(XT) Seems to be quite unstable, at least for me..
EDIT: Even RX580 keeps crashing, totally random with cards, Rig was stable 9 months with LoL and now with TRM crashing all the time.
Maybe i will change back, i lose 100w but get stable rig...
Topic: [ANN] TeamRedMiner v0.10.10 - Ironfish/Kaspa/ZIL/Kawpow/Etchash and More - page 5. (Read 211852 times)
May 30, 2022, 02:22:33 PM
May 26, 2022, 03:51:13 PM
My newest video:
RX 5700 - Testing R-mode TeamRedMiner - https://youtu.be/fmRjEje7boo
RX 5700 - Testing R-mode TeamRedMiner - https://youtu.be/fmRjEje7boo
May 26, 2022, 08:31:19 AM
the new version 0.10 seems to work well with 5800/6800/580, but the video cards began to fall off periodically, I think due to the fact that the consumption has changed and the fine-tuning of the power consumption has become ineffective and you need to slightly change the voltage upwards
I tested all versions and the stable 0.10 produces some rejected shares on a couple of 6700 XT cards by Sapphire that have an higher factory clock compared to others but outside of that very small issue it's a very solid release to start the new branch. Still looking for a way to improve RX 6600 XT power compsumpion but seems like a OS overclock issue because under 900 Mhz core settings are not accepted (1400 is applied as fail safe, at least in Hive)
I downvolted basically all cores in my case and saved a few watts, runs very stable but you need AMD drivers 21.50.2 or 22.10.2 (faster) to improve stability and performance, if you upgrade the drivers you'll have more stability and shares.
May 25, 2022, 04:15:35 PM
the new version 0.10 seems to work well with 5800/6800/580, but the video cards began to fall off periodically, I think due to the fact that the consumption has changed and the fine-tuning of the power consumption has become ineffective and you need to slightly change the voltage upwards
May 24, 2022, 03:38:57 PM
when will R mode ready for Windows?
May 24, 2022, 11:39:37 AM
Is there a resource for R mode? I'd like to see if I can squeeze out any more hashrate or reduce my wattage. I have Radeon VIIs, 6800s, 6700xt 6600xt.
Of course there is. There is literally an ethash_tuning_guide_rmode file inside the teamredminer folder.
May 22, 2022, 01:25:35 AM
Is there a resource for R mode? I'd like to see if I can squeeze out any more hashrate or reduce my wattage. I have Radeon VIIs, 6800s, 6700xt 6600xt.
May 21, 2022, 07:23:17 AM
May 19, 2022, 10:28:57 AM
Is it possible to define Power Limit from command line when using TRM?
I'm running TRM 0.9.4.7 in Windows 10.
Trying to find optimal settings for Gigabyte Vega 56, with Hynix.
Many miners allow power limit setting from command line. Is it possible in TRM?
README highlights:
GPU: R-mode introduced. See separate documentation. Applicable for Vegas/VIIs/Navi10/Big Navi.
GPU: Smooth power transitions for ethash family algos.
https://github.com/todxx/teamredminer/releases/tag/v0.10.0
May 18, 2022, 04:20:04 PM
Is it possible to define Power Limit from command line when using TRM?
I'm running TRM 0.9.4.7 in Windows 10.
Trying to find optimal settings for Gigabyte Vega 56, with Hynix.
Many miners allow power limit setting from command line. Is it possible in TRM?
May 18, 2022, 06:41:37 AM
teamredminer v0.9.4.7
"We've chosen to release v0.9.4.7 and the previous v0.9.4.6 as public betas to gather more user feedback without triggering automatic updates in mining distros. With the v0.9.4.7 release, we believe we've solved the issue with some Navi gpus simply not responding well to R-mode, rather dropping to e.g. 48-50 MH/s instead of expected 55-56 MH/s for a 5700/5700XT. We're expecting to push this version in a proper public release shortly unless we hear about any additional issues. If you don't use the new R-mode, or you're a Windows miner, you still have an upside running this new version for the "smooth power" rewrite described below."
https://github.com/todxx/teamredminer#teamredminer-v0947
"We've chosen to release v0.9.4.7 and the previous v0.9.4.6 as public betas to gather more user feedback without triggering automatic updates in mining distros. With the v0.9.4.7 release, we believe we've solved the issue with some Navi gpus simply not responding well to R-mode, rather dropping to e.g. 48-50 MH/s instead of expected 55-56 MH/s for a 5700/5700XT. We're expecting to push this version in a proper public release shortly unless we hear about any additional issues. If you don't use the new R-mode, or you're a Windows miner, you still have an upside running this new version for the "smooth power" rewrite described below."
https://github.com/todxx/teamredminer#teamredminer-v0947
May 15, 2022, 04:25:56 PM
Hello, I'm testing this miner, pretty interested in very good 5700 XT support.
I have a problem with CM api, I'm configuring it like this:
--cm_api_listen=0.0.0.0:1501
But as soon as I try to connect to the API I get this error:
CM API failed to parse rpc: GET / HTTP/1.1
Any hint?
Thanks
EDIT: it seems there is a problem with the latest 0.9.4.7, tried 0.9.4.2 and it is working fine
EDIT #2: tried again 0.9.4.7 and CM API is now working fine, I guess I made something wrong in the beginning
I have a problem with CM api, I'm configuring it like this:
--cm_api_listen=0.0.0.0:1501
But as soon as I try to connect to the API I get this error:
CM API failed to parse rpc: GET / HTTP/1.1
Any hint?
Thanks
EDIT: it seems there is a problem with the latest 0.9.4.7, tried 0.9.4.2 and it is working fine
EDIT #2: tried again 0.9.4.7 and CM API is now working fine, I guess I made something wrong in the beginning
May 15, 2022, 05:59:06 AM
Is there an option to lower mining intensity of a gpu if it reaches a certain temperature?
I remember that claymore had the -ttli option and if you set it to -ttli 75 if that card reaches 75 degrees it starts mining slower.
I remember that claymore had the -ttli option and if you set it to -ttli 75 if that card reaches 75 degrees it starts mining slower.
May 13, 2022, 11:23:31 PM
R Mode memory allocation question on Instinct MI25 and MI60. Is the memory allocation acting as expected, leaving ~10 / 26GiB free on the MI25s and MI60?
TRM 0.9.4.7
Linux 5.10.0-hiveos #83.hiveos.211201 SMP Wed Dec 1 11:51:04 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
AMD Driver 20.40 (5.11.1001)
0 04:00.0 Radeon Pro V320 16368 MB · 113-D0515300-101
1 08:00.0 Radeon Pro V320 16368 MB · 113-D0515300-101
2 0c:00.0 Radeon Pro VII 32752 MB · 113-D1630600-107
Thanks for trm!
TRM 0.9.4.7
Linux 5.10.0-hiveos #83.hiveos.211201 SMP Wed Dec 1 11:51:04 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
AMD Driver 20.40 (5.11.1001)
0 04:00.0 Radeon Pro V320 16368 MB · 113-D0515300-101
1 08:00.0 Radeon Pro V320 16368 MB · 113-D0515300-101
2 0c:00.0 Radeon Pro VII 32752 MB · 113-D1630600-107
Code:
Team Red Miner version 0.9.4.7
[2022-05-13 21:16:27] Linux kernel vm mode parameters are already correct.
[2022-05-13 21:16:27] Auto-detected AMD OpenCL platform 0
[2022-05-13 21:16:28] Initializing GPU 0.
[2022-05-13 21:16:28] Initializing GPU 1.
[2022-05-13 21:16:28] Initializing GPU 2.
[2022-05-13 21:16:28] GPU 0 Vega boost applied.
[2022-05-13 21:16:28] GPU 0 Starting tuning.
[2022-05-13 21:16:28] GPU 1 Vega boost applied.
[2022-05-13 21:16:28] GPU 1 Starting tuning.
[2022-05-13 21:16:28] GPU 2 Radeon VII boost applied.
[2022-05-13 21:16:28] GPU 2 Starting tuning.
[2022-05-13 21:16:28] Successfully initialized GPU 0: Vega with 64 CU (PCIe 04:00.0)
[2022-05-13 21:16:28] Successfully initialized GPU 1: Vega with 64 CU (PCIe 08:00.0)
[2022-05-13 21:16:28] Successfully initialized GPU 2: Vega2 with 64 CU (PCIe 0c:00.0)
...
[2022-05-13 21:16:33] GPU 0 DAG allocation trying 16368.0 - 9712.0 = 6656.0 MiB.
[2022-05-13 21:16:33] GPU 2 DAG allocation trying 32752.0 - 26096.0 = 6656.0 MiB.
[2022-05-13 21:16:33] GPU 1 DAG allocation trying 16368.0 - 9712.0 = 6656.0 MiB.
...
[2022-05-13 21:16:36] GPU 0 Starting DAG generation for epoch 492, 4.84 GB (single buffer mode).
[2022-05-13 21:16:37] GPU 1 Starting DAG generation for epoch 492, 4.84 GB (single buffer mode).
[2022-05-13 21:16:37] GPU 2 Starting DAG generation for epoch 492, 4.84 GB (single buffer mode).
[2022-05-13 21:16:41] GPU 2 DAG generation finished in 3.498 seconds.
[2022-05-13 21:16:41] GPU 0 DAG generation finished in 5.149 seconds.
[2022-05-13 21:16:42] GPU 1 DAG generation finished in 5.150 seconds.
[2022-05-13 21:16:27] Linux kernel vm mode parameters are already correct.
[2022-05-13 21:16:27] Auto-detected AMD OpenCL platform 0
[2022-05-13 21:16:28] Initializing GPU 0.
[2022-05-13 21:16:28] Initializing GPU 1.
[2022-05-13 21:16:28] Initializing GPU 2.
[2022-05-13 21:16:28] GPU 0 Vega boost applied.
[2022-05-13 21:16:28] GPU 0 Starting tuning.
[2022-05-13 21:16:28] GPU 1 Vega boost applied.
[2022-05-13 21:16:28] GPU 1 Starting tuning.
[2022-05-13 21:16:28] GPU 2 Radeon VII boost applied.
[2022-05-13 21:16:28] GPU 2 Starting tuning.
[2022-05-13 21:16:28] Successfully initialized GPU 0: Vega with 64 CU (PCIe 04:00.0)
[2022-05-13 21:16:28] Successfully initialized GPU 1: Vega with 64 CU (PCIe 08:00.0)
[2022-05-13 21:16:28] Successfully initialized GPU 2: Vega2 with 64 CU (PCIe 0c:00.0)
...
[2022-05-13 21:16:33] GPU 0 DAG allocation trying 16368.0 - 9712.0 = 6656.0 MiB.
[2022-05-13 21:16:33] GPU 2 DAG allocation trying 32752.0 - 26096.0 = 6656.0 MiB.
[2022-05-13 21:16:33] GPU 1 DAG allocation trying 16368.0 - 9712.0 = 6656.0 MiB.
...
[2022-05-13 21:16:36] GPU 0 Starting DAG generation for epoch 492, 4.84 GB (single buffer mode).
[2022-05-13 21:16:37] GPU 1 Starting DAG generation for epoch 492, 4.84 GB (single buffer mode).
[2022-05-13 21:16:37] GPU 2 Starting DAG generation for epoch 492, 4.84 GB (single buffer mode).
[2022-05-13 21:16:41] GPU 2 DAG generation finished in 3.498 seconds.
[2022-05-13 21:16:41] GPU 0 DAG generation finished in 5.149 seconds.
[2022-05-13 21:16:42] GPU 1 DAG generation finished in 5.150 seconds.
Thanks for trm!
May 09, 2022, 05:26:10 AM
I'm testing the latest beta in HiveOS, I enable R-mode but I get this error:
Team Red Miner version 0.9.4.6
[2022-05-09 12:13:36] Pool eu1.ethermine.org: Ethermine ethash auto mode detected, setting --eth_stratum_mode=ethproxy
Failed to execute command './ubuntu_mode_script.sh', errno 2 (No such file or directory)
[2022-05-09 12:13:36] Linux kernel vm mode script failed, see output.
[2022-05-09 12:13:36] Failed executing linux kernel vm mode script, check output.
teamredminer exited (exitcode=0), waiting to cooldown a bit
I also tried executing manually "echo -e "amdgpu.vm_block_size=11\namdgpu.vm_size=2048" > /hive/etc/grub.custom && selfupgrade -g && sreboot" but still the same error, not sure how to fix it
Team Red Miner version 0.9.4.6
[2022-05-09 12:13:36] Pool eu1.ethermine.org: Ethermine ethash auto mode detected, setting --eth_stratum_mode=ethproxy
Failed to execute command './ubuntu_mode_script.sh', errno 2 (No such file or directory)
[2022-05-09 12:13:36] Linux kernel vm mode script failed, see output.
[2022-05-09 12:13:36] Failed executing linux kernel vm mode script, check output.
teamredminer exited (exitcode=0), waiting to cooldown a bit
I also tried executing manually "echo -e "amdgpu.vm_block_size=11\namdgpu.vm_size=2048" > /hive/etc/grub.custom && selfupgrade -g && sreboot" but still the same error, not sure how to fix it
March 11, 2022, 01:09:42 PM
very impressed with this miner
i manage a LOT of polaris - see the dastardlyman youtube channel recent video.
first the eth plus ton has ran great - some cards you turn intensity down a bit but its all good.
the second bit is we have a lot of old cards that are lets face it shagged. worn out.
they wont run stable on phoenix. but used with trm in pure eth mode or eth plus zero ton
they are stable and mine just fine.
for instance ive got a shagged 5600xt here at home
it wont run stable at any speed on phoenix.
but its doing stable 37 m hash on trm
if i slide the memclock up beyond 1750 trm doesnt crash but it goes weird
basically stops mining but then when i slide the mem back to 1750
it mines away like a trooper and forgets that i oversped the ram too much
ive never seen software do that - amazing - not crash!
i like the trm honest hashrate counter
best wishes from manchester uk
i manage a LOT of polaris - see the dastardlyman youtube channel recent video.
first the eth plus ton has ran great - some cards you turn intensity down a bit but its all good.
the second bit is we have a lot of old cards that are lets face it shagged. worn out.
they wont run stable on phoenix. but used with trm in pure eth mode or eth plus zero ton
they are stable and mine just fine.
for instance ive got a shagged 5600xt here at home
it wont run stable at any speed on phoenix.
but its doing stable 37 m hash on trm
if i slide the memclock up beyond 1750 trm doesnt crash but it goes weird
basically stops mining but then when i slide the mem back to 1750
it mines away like a trooper and forgets that i oversped the ram too much
ive never seen software do that - amazing - not crash!
i like the trm honest hashrate counter
best wishes from manchester uk
March 09, 2022, 06:07:58 AM
Hello, can someone tell me where I can change intesity in teamred miner(I am using the latest verison). I have rx 6900xt, mining ETH+TON in Windows, but when I am mining my system works very slow, what can do with it? If I use nbminer for ETH mining I have 0 problems even playing some simple games!
TON is very GPU intensive, so i think this is normal. And no Teamredminer has no intensity paramater, you can play with --eth_config (more information in teamredminer folder or github) - but for sure the pool hashrate is much higher than nbminer. nbminer inflated the hashrate up to 5%.
March 09, 2022, 05:58:57 AM
Hello, can someone tell me where I can change intesity in teamred miner(I am using the latest verison). I have rx 6900xt, mining ETH+TON in Windows, but when I am mining my system works very slow, what can do with it? If I use nbminer for ETH mining I have 0 problems even playing some simple games!
TON is very GPU intensive, so i think this is normal. And no Teamredminer has no intensity paramater, you can play with --eth_config (more information in teamredminer folder or github) - but for sure the pool hashrate is much higher than nbminer. nbminer inflated the hashrate up to 5%.
March 09, 2022, 05:44:07 AM
Hello, can someone tell me where I can change intesity in teamred miner(I am using the latest verison). I have rx 6900xt, mining ETH+TON in Windows, but when I am mining my system works very slow, what can do with it? If I use nbminer for ETH mining I have 0 problems even playing some simple games!
March 07, 2022, 03:27:12 AM
AND NOW I SEE THE PROBLEM. DUAL MINING ETC+ZIL is only possible if you generate a new DAG every time on windows pc´s. ETC+ZIL DAG is now lightly over 4GB in windows for sure - linux have a little bit more time. Lolminer cannot caching the Zil DAG on ETC (reported to lolliedieb so often, but he don´t care about it)
You must delete the command: --eth_dag_cache=0
You must delete the command: --eth_dag_cache=0
Thank you for reply!
Yes, I'am using tripple mining
ETC+ZIL+TON (ezil.me)There is no --eth_dag_cache=0 key present, but I've also tried to add it, and no result
Now trying to play with --eth_4g_max_alloc, but still no result.Try ETC+TON only first or only ETC.
Jump to: