[ANN] TeamRedMiner v0.10.10 - Ironfish/Kaspa/ZIL/Kawpow/Etchash and More - page 8.

batsonxl

member

Activity: 1201

Merit: 26

Hey TRM team can you please add BEAM v3 algo to miner. Thanks for hard work.

Quote from: wolverine5pl on October 28, 2021, 06:47:16 AM

When trying to mine Shiba on unminable i get this error on hiveos
Pool ethash.unmineable.com failed to parse server rpc: {"id":4,"result":false,"error":["-1","Malformed nonce"]}

Any idea why

You dont need mine there you can mine eth then covert to shiba. Personally i wouldnt sell my eth for shiba because it is pumped allready,it is my opinion.

[moderator's note: consecutive posts merged]

wolverine5pl

sr. member

Activity: 437

Merit: 250

When trying to mine Shiba on unminable i get this error on hiveos
Pool ethash.unmineable.com failed to parse server rpc: {"id":4,"result":false,"error":["-1","Malformed nonce"]}

Any idea why

deedeeranged

member

Activity: 325

Merit: 42

Quote from: sxemini on October 27, 2021, 06:56:21 AM

Quote from: ?? on ??

Quote from: SergeySS on October 26, 2021, 09:33:10 AM

teamredminer.exe -a firopow -o stratum+tcp://solo-firo.2miners.com:9090 -u YOUR_WALLET_ADDRESS.RIG_ID -p x

Pool solo-firo.2miners.com received new job epoch 322 (variant firopow), cache built in 2.2 secs.
GPU 1 ERROR - failed to allocate ethash DAG buffer
GPU 1 thread exiting with error.
GPU 0 ERROR - failed to allocate ethash DAG buffer
GPU 0 thread exiting with error.
Watchdog detected all worker threads have exited, shutting down.
Shutting down...

Video Cards 480 8G, Windows 10

Does TRM recognize the cards having 8GB? Try a different miner like gminer or phoenixminer if it show the same issue.
The windows 10 AMD driver might be to new.

Phoenixminer and gminer don´t support Firopow at the moment. But he can try to mine ETH.

Your right. I only saw the ethash messages while he was trying to mine firopow.
If I am correct the hard fork from MTP to FiroPow was on the 26 October 06:00hrs.
He could try this first to see if he still has the issue, if not the issue is with the solo pool.:
teamredminer.exe -a firopow -o stratum+tcp://firo.2miners.com:8181 -u YourWalllet.RIG_ID -p x

sxemini

member

Activity: 1558

Merit: 69

Quote from: ?? on ??

Quote from: SergeySS on October 26, 2021, 09:33:10 AM

teamredminer.exe -a firopow -o stratum+tcp://solo-firo.2miners.com:9090 -u YOUR_WALLET_ADDRESS.RIG_ID -p x

Pool solo-firo.2miners.com received new job epoch 322 (variant firopow), cache built in 2.2 secs.
GPU 1 ERROR - failed to allocate ethash DAG buffer
GPU 1 thread exiting with error.
GPU 0 ERROR - failed to allocate ethash DAG buffer
GPU 0 thread exiting with error.
Watchdog detected all worker threads have exited, shutting down.
Shutting down...

Video Cards 480 8G, Windows 10

Does TRM recognize the cards having 8GB? Try a different miner like gminer or phoenixminer if it show the same issue.
The windows 10 AMD driver might be to new.

Phoenixminer and gminer don´t support Firopow at the moment. But he can try to mine ETH.

deedeeranged

member

Activity: 325

Merit: 42

Quote from: Dr_Victor on October 22, 2021, 12:21:43 PM

Does ethermine pay for stale shares?

AFAIK they do. But stay within reason with stales the lower the better.

Quote from: SergeySS on October 26, 2021, 09:33:10 AM

teamredminer.exe -a firopow -o stratum+tcp://solo-firo.2miners.com:9090 -u YOUR_WALLET_ADDRESS.RIG_ID -p x

Pool solo-firo.2miners.com received new job epoch 322 (variant firopow), cache built in 2.2 secs.
GPU 1 ERROR - failed to allocate ethash DAG buffer
GPU 1 thread exiting with error.
GPU 0 ERROR - failed to allocate ethash DAG buffer
GPU 0 thread exiting with error.
Watchdog detected all worker threads have exited, shutting down.
Shutting down...

Video Cards 480 8G, Windows 10

Does TRM recognize the cards having 8GB? Try a different miner like gminer or phoenixminer if it show the same issue.
The windows 10 AMD driver might be to new.

[moderator's note: consecutive posts merged]

SergeySS

newbie

Activity: 15

Merit: 0

teamredminer.exe -a firopow -o stratum+tcp://solo-firo.2miners.com:9090 -u YOUR_WALLET_ADDRESS.RIG_ID -p x

Pool solo-firo.2miners.com received new job epoch 322 (variant firopow), cache built in 2.2 secs.
GPU 1 ERROR - failed to allocate ethash DAG buffer
GPU 1 thread exiting with error.
GPU 0 ERROR - failed to allocate ethash DAG buffer
GPU 0 thread exiting with error.
Watchdog detected all worker threads have exited, shutting down.
Shutting down...

Video Cards 480 8G, Windows 10

Dr_Victor

sr. member

Activity: 954

Merit: 250

Does ethermine pay for stale shares?

abg00

jr. member

Activity: 288

Merit: 1

need help
cannot install and use rx6600xt on windows
phoenix work fine. trm write cannot find opencl card

plz write driver and windows version plz
test 1809 20h2 and 21.8.2 21.9.1 drivers

Doucesti

newbie

Activity: 24

Merit: 0

Gained 4 mh/s on my vega just by running your last release!
Thank you!

pp55

newbie

Activity: 41

Merit: 0

Bugreport:
Running Windows 10 + 20.5.1, TRM 8.6, Radeon VII. Fan speed adjusting is working excellent, FanRpm in log is OK, FanPct in log is always 0.00%. In Claymores monitor (--cm_api_listen) temperatures are OK, fan speed 0%.

PeaMine

hero member

Activity: 979

Merit: 510

0.8.6 works with the latest drivers for VII and XT series.
Very good speeds 62MH 6800XT and 86.5MH+ on VII with no memory timing changes.
Able to still use 6800XT as main display watching videos and even some games no issue.

I assume there may be a way to squeeze more out of 6xxx series in the future? Since smaller chips but uses about the same watts as the R7 but with less hash?
This isn't a problem of TRM as all software does this that I have tried.

Thanks for your work!

nik-qz

member

Activity: 66

Merit: 45

Quote from: kerney666 on October 03, 2021, 05:52:51 PM

Quote from: nik-qz on September 18, 2021, 04:39:55 AM

Quote from: kerney666 on September 17, 2021, 05:02:09 PM

Quote from: nik-qz on September 14, 2021, 05:28:23 AM

Quote from: nik-qz on September 07, 2021, 03:33:48 AM

launched a farm profile that worked on version 8.4 to version 8.5 and shows some kind of error -8 on one of the 5700 video cards with ADL fan control and will not start, I had to return version 8.4

when activating the option --fan_control = 63 ::: 50: 1: 90 in version 8.5, the program does not start if there are 5700 video cards , fix it otherwise it is impossible to control the fans

Interesting, can you tell me what driver version you're on and I'll try to reproduce?

of course ATI_AdrenalinDrivers20.5.1. OverdriveNTool2.9 works with these drivers, so I use them

I believe I reproduced this issue and it will be fixed in 0.8.6, released in a few days from now. I'll downgrade to 20.5.1 myself tomorrow and test as well to verify.

thx, this problem has disappeared
BUT now another has appeared
bought a big navi 6800 video card and does not want to control the speed with the options --fan_control = 50: 60: 80: 30: 30: 90 fan_default_big_navi = 50: 60: 80: 30: 1: 90
when I start the rig with the fan_control option, then immediately the fan speed is reset to 0 and is not controlled by temperature and is constantly in this position, but if I remove the fan_control option and leave only fan_default_big_navi, then the speed decreases smoothly to the minimum stitched in the BIOS about 20% and also without control.
tried on version 0.8.5. and 0.8.6 driver 20.12.2, note that I also use the MTP program overlaying some settings in the SPPT

kerney666

member

Activity: 658

Merit: 86

Quote from: nik-qz on September 18, 2021, 04:39:55 AM

Quote from: kerney666 on September 17, 2021, 05:02:09 PM

Quote from: nik-qz on September 14, 2021, 05:28:23 AM

Quote from: nik-qz on September 07, 2021, 03:33:48 AM

launched a farm profile that worked on version 8.4 to version 8.5 and shows some kind of error -8 on one of the 5700 video cards with ADL fan control and will not start, I had to return version 8.4

when activating the option --fan_control = 63 ::: 50: 1: 90 in version 8.5, the program does not start if there are 5700 video cards , fix it otherwise it is impossible to control the fans

Interesting, can you tell me what driver version you're on and I'll try to reproduce?

of course ATI_AdrenalinDrivers20.5.1. OverdriveNTool2.9 works with these drivers, so I use them

I believe I reproduced this issue and it will be fixed in 0.8.6, released in a few days from now. I'll downgrade to 20.5.1 myself tomorrow and test as well to verify.

kerney666

member

Activity: 658

Merit: 86

Quote from: ?? on ??

Quote from: PeaMine on September 22, 2021, 09:24:20 AM

Any plans on adding support for Radeon VII with newer drivers?
I updated to most recent drivers for the 6800 XT, which really helped a lot of features and stability, but it killed my R7.
Works with other miners, but really like TRM

ditto

We'll release 0.8.6 in 1-2 days that should address the issues for R7 on newer Adrenalin drivers. I'd love to get a few more users to verify it runs ok for them as well though. If you have a chance of joining our Discord server and send me (Kerney666) a DM there I'll give you a beta release to test.

suntborg

newbie

Activity: 1

Merit: 0

Hello

i get this message from teamredminer under win 7 ultimate.

pool eu1.ethermine.org enabling SSL due to reconnect without receiving a valid rpc

and after this i get

pool eu1.ethermine.org disabling SSL due to reconnect without receiving a valid rpc

and vise versa.

i disable the norton Firewall full and the auto protect too.

what else i can do

thx

Stefan

smilodon

member

Activity: 127

Merit: 10

Any plan to add command -r,--retries to use on zergpool multi algo switching?

PeaMine

hero member

Activity: 979

Merit: 510

Any plans on adding support for Radeon VII with newer drivers?
I updated to most recent drivers for the 6800 XT, which really helped a lot of features and stability, but it killed my R7.
Works with other miners, but really like TRM

fmz89

legendary

Activity: 1764

Merit: 1002

Nice new features on 8.5, will try it soon on weekends,

mem temp limit is nice addition, hope stability & efficiency still same or better

nik-qz

member

Activity: 66

Merit: 45

Quote from: Wotan Wipeout on September 19, 2021, 12:12:57 PM

I dont understand the Fan Control, sorry.
Tried to set the fans of my 6900XT to 70% using

--fan_default_big_navi=70

Where is my mistake?

thx

for example how i do if there are two types of cards 5700 and 580
--fan_control=63:::50:1:90
--fan_default_navi=61:76:94:50:1:90
--fan_default_polaris=63:::50:1:90

if you only have Navi big 6900 cards then try this with your values
--fan_control=61:76:94:50:1:90
--fan_default_big_navi=61:76:94:50:1:90
where the values are as follows
Temp_core,Tjct,Tmem_max,fan_start,fan_min,fan_max

Wotan Wipeout

member

Activity: 438

Merit: 27

I dont understand the Fan Control, sorry.
Tried to set the fans of my 6900XT to 70% using

--fan_default_big_navi=70

Where is my mistake?

thx

Topic: [ANN] TeamRedMiner v0.10.10 - Ironfish/Kaspa/ZIL/Kawpow/Etchash and More - page 8. (Read 211896 times)