I did, its says at this domain? By sending an email to applications (at) (this domain).
That's just a measure to protect against automated email harvesters.In case you can't figure it out, the address is:
Topic: [ANN] The First Litecoin PPS Pool (litecoinpool.org) - page 59. (Read 228113 times)
In case you can't figure it out, the address is:
When will the registrations be open? Looking to point 8 7950s at a PPs LTC pool.
As I've said before, you can apply for an account via email. Please read the guidelines on the website.By the way, the DDoS is still ongoing, but its effects are limited at the moment.
I did, its says at this domain? By sending an email to applications (at) (this domain). [email protected]?
i dont know but its all open from here 
Pool Speed 2,375,497 kH/s Users 764 Difficulty 769.71496776
noname (logout)
Pool Speed 2,375,497 kH/s Users 764 Difficulty 769.71496776
noname (logout)
set it to 1
When will the registrations be open? Looking to point 8 7950s at a PPs LTC pool.
As I've said before, you can apply for an account via email. Please read the guidelines on the website.By the way, the DDoS is still ongoing, but its effects are limited at the moment.
i dont know but its all open from here
Pool Speed 2,375,497 kH/s Users 764 Difficulty 769.71496776
noname (logout)
Pool Speed 2,375,497 kH/s Users 764 Difficulty 769.71496776
noname (logout)
There getting DDoS at the moment.
I create the account 2012-03-01 but i dont use much then if you want a place there i can share my account(only the time you get your own account), i give to you the worker/password and you give to me your LTC address.
When will the registrations be open? Looking to point 8 7950s at a PPs LTC pool.
Please give the invitation to the pool. I have 5 cars by 2.8 Kh / s each, a total of 14.000 Kh / s
A DDoS attack is currently affecting the website and some of the miners.
Make sure you have failover correctly set up in cgminer.
Make sure you have failover correctly set up in cgminer.
what is the conditions of joining your pool ?
At the moment there are no fixed requirements. Applications are reviewed on a case-by-case basis. 
what is the conditions of joining your pool ?
What is the reward system on pool, pps or pplns??? or other?
Thanks. But with which name I must save this batch file?
cgminer is called from within the batch file. The name of the batch file itself is irrelevant.This batch file will look like this:
Code:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
cgminer --scrypt [all the other options here]
Thanks a lot!!!
Thanks. But with which name I must save this batch file?
cgminer is called from within the batch file. The name of the batch file itself is irrelevant.This batch file will look like this:
Code:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
cgminer --scrypt [all the other options here]
I read that but I can't understand. I am a very new miner. Sorry about my ignorance but what does it mean "are not cgminer options" and "on Windows you set them in the batch file you use to start cgminer, on two separate lines". What is the batch file? Where I must put these two commands? Is correct the config above without "GPU_MAX_ALLOC_PERCENT and GPU_USE_SYNC_OBJECTS"?
If you don't have problems when running cgminer without having set those two environment variables I suppose you can just ignore them. I can't be totally sure because I haven't used Windows in ages.
Otherwise, make a batch file (a .bat file) where you set the two variables and then call cgminer.
Quote
On windows the same commands can be passed via a batch file if the following lines are in the .bat before starting cgminer:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
Thanks. But with which name I must save this batch file?
I read that but I can't understand. I am a very new miner. Sorry about my ignorance but what does it mean "are not cgminer options" and "on Windows you set them in the batch file you use to start cgminer, on two separate lines". What is the batch file? Where I must put these two commands? Is correct the config above without "GPU_MAX_ALLOC_PERCENT and GPU_USE_SYNC_OBJECTS"?
If you don't have problems when running cgminer without having set those two environment variables I suppose you can just ignore them. I can't be totally sure because I haven't used Windows in ages.
Otherwise, make a batch file (a .bat file) where you set the two variables and then call cgminer.
Quote
On windows the same commands can be passed via a batch file if the following lines are in the .bat before starting cgminer:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
Thanks a lot. Is this config correct (I need advise especially for the first point of your advices):
cgminer.exe --scrypt --setx GPU_MAX_ALLOC_PERCENT 100 --setx GPU_USE_SYNC_OBJECTS 1 -o http://litecoinpool.org:9332 -u roland.1 -p 1 -I 15 --shaders 480
cgminer.exe --scrypt --setx GPU_MAX_ALLOC_PERCENT 100 --setx GPU_USE_SYNC_OBJECTS 1 -o http://litecoinpool.org:9332 -u roland.1 -p 1 -I 15 --shaders 480
No, GPU_MAX_ALLOC_PERCENT and GPU_USE_SYNC_OBJECTS are not cgminer options. Normally on Windows you set them in the batch file you use to start cgminer, on two separate lines. This is described in the document I linked above.
I read that but I can't understand. I am a very new miner. Sorry about my ignorance but what does it mean "are not cgminer options" and "on Windows you set them in the batch file you use to start cgminer, on two separate lines". What is the batch file? Where I must put these two commands? Is correct the config above without "GPU_MAX_ALLOC_PERCENT and GPU_USE_SYNC_OBJECTS"?
Thanks a lot. Is this config correct (I need advise especially for the first point of your advices):
cgminer.exe --scrypt --setx GPU_MAX_ALLOC_PERCENT 100 --setx GPU_USE_SYNC_OBJECTS 1 -o http://litecoinpool.org:9332 -u roland.1 -p 1 -I 15 --shaders 480
cgminer.exe --scrypt --setx GPU_MAX_ALLOC_PERCENT 100 --setx GPU_USE_SYNC_OBJECTS 1 -o http://litecoinpool.org:9332 -u roland.1 -p 1 -I 15 --shaders 480
No, GPU_MAX_ALLOC_PERCENT and GPU_USE_SYNC_OBJECTS are not cgminer options. Normally on Windows you set them in the batch file you use to start cgminer, on two separate lines. This is described in the document I linked above.
It is the first time that I mine Litecoin and I have problems with the configuration of cgminer. I used this configuration:
cgminer.exe -o http://litecoinpool.org:9332 -u workername -p password -I 7
But I have only rejected shares with the written "target-miss".
cgminer.exe -o http://litecoinpool.org:9332 -u workername -p password -I 7
But I have only rejected shares with the written "target-miss".
Litecoin mining requires different settings than Bitcoin mining.
All cgminer users should read this document before trying to configure their miners.
The most important points are:
- Set GPU_MAX_ALLOC_PERCENT and GPU_USE_SYNC_OBJECTS.
- Set the --scrypt option.
- Tell cgminer how many shaders your GPU has by using the --shaders option.
- Find an appropriate intensity.
- Make sure that no hardware errors occur (all HW figures must stay at 0).
Thanks a lot. Is this config correct (I need advise especially for the first point of your advices):
cgminer.exe --scrypt --setx GPU_MAX_ALLOC_PERCENT 100 --setx GPU_USE_SYNC_OBJECTS 1 -o http://litecoinpool.org:9332 -u roland.1 -p 1 -I 15 --shaders 480
Thanks a lot
Jump to: