Blockchain attack yesterday. We just gonna pretend it didn't happen?
Well said!
I think the chain survived the attack this time - PoS still seems to be working well - PoW seems to be lower, is the hash rate too high?
Topic: [ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay] - page 53. (Read 2375926 times)
Well said!
I think the chain survived the attack this time - PoS still seems to be working well - PoW seems to be lower, is the hash rate too high?
Blockchain attack yesterday. We just gonna pretend it didn't happen?
Well said!
Blockchain attack yesterday. We just gonna pretend it didn't happen?
Anyone seeing problems with peers in the wallet?
Just noticed today I'm only getting connected to a single peer (joe's main one)
Before you ask, Yes I've got listen=1 in my conf and been getting peers in the past.
It might be my system, it's been acting odd lately, so I'm going to a wipe and reinstall of Linux later today or tomorrow.
My connection has dropped a few times today as well.
Just noticed today I'm only getting connected to a single peer (joe's main one)
Before you ask, Yes I've got listen=1 in my conf and been getting peers in the past.
It might be my system, it's been acting odd lately, so I'm going to a wipe and reinstall of Linux later today or tomorrow.
My connection has dropped a few times today as well.
I'm connected to 7 peers, which still isn't massive - total network height is 289180, so I'm pretty sure I'm not on a forked chain
You could always add some more 1.4.6.2 nodes using the following link
https://chainz.cryptoid.info/xmg/#!network
I had the same issue when I was running 1.4.6.1
Thanks
Think it was just my connection playing up. I restarted everything and left it for a few hours before starting the wallet.
I've now got 114 connections.
Can you tell me how have 114 connections?
by having "listen=1" in the "magi.conf" file and a good connection
But I've disabled it at the moment due to the Idiot attacking the chain.
With Listen=0 your wallet will only get info from specified nodes. I'm only using Joe's node to try and stay off a split.
Thanks for the reply. I have Joe's node and listen=0. And only one connection in my wallet (Windows version, latest build )
Anyone seeing problems with peers in the wallet?
Just noticed today I'm only getting connected to a single peer (joe's main one)
Before you ask, Yes I've got listen=1 in my conf and been getting peers in the past.
It might be my system, it's been acting odd lately, so I'm going to a wipe and reinstall of Linux later today or tomorrow.
My connection has dropped a few times today as well.
Just noticed today I'm only getting connected to a single peer (joe's main one)
Before you ask, Yes I've got listen=1 in my conf and been getting peers in the past.
It might be my system, it's been acting odd lately, so I'm going to a wipe and reinstall of Linux later today or tomorrow.
My connection has dropped a few times today as well.
I'm connected to 7 peers, which still isn't massive - total network height is 289180, so I'm pretty sure I'm not on a forked chain
You could always add some more 1.4.6.2 nodes using the following link
https://chainz.cryptoid.info/xmg/#!network
I had the same issue when I was running 1.4.6.1
Thanks
Think it was just my connection playing up. I restarted everything and left it for a few hours before starting the wallet.
I've now got 114 connections.
Can you tell me how have 114 connections?
by having "listen=1" in the "magi.conf" file and a good connection
But I've disabled it at the moment due to the Idiot attacking the chain.
With Listen=0 your wallet will only get info from specified nodes. I'm only using Joe's node to try and stay off a split.
Anyone seeing problems with peers in the wallet?
Just noticed today I'm only getting connected to a single peer (joe's main one)
Before you ask, Yes I've got listen=1 in my conf and been getting peers in the past.
It might be my system, it's been acting odd lately, so I'm going to a wipe and reinstall of Linux later today or tomorrow.
My connection has dropped a few times today as well.
Just noticed today I'm only getting connected to a single peer (joe's main one)
Before you ask, Yes I've got listen=1 in my conf and been getting peers in the past.
It might be my system, it's been acting odd lately, so I'm going to a wipe and reinstall of Linux later today or tomorrow.
My connection has dropped a few times today as well.
I'm connected to 7 peers, which still isn't massive - total network height is 289180, so I'm pretty sure I'm not on a forked chain
You could always add some more 1.4.6.2 nodes using the following link
https://chainz.cryptoid.info/xmg/#!network
I had the same issue when I was running 1.4.6.1
Thanks
Think it was just my connection playing up. I restarted everything and left it for a few hours before starting the wallet.
I've now got 114 connections.
Can you tell me how have 114 connections?
Hey all,
anyone have any idea whats going on with Minerclaim. Orphans up and down my transaction list. All I see is this on there website.
"We are investigating issues in the backend. Your shares and hashrate are safe and we will fix things ASAP."
anyone have any idea whats going on with Minerclaim. Orphans up and down my transaction list. All I see is this on there website.
"We are investigating issues in the backend. Your shares and hashrate are safe and we will fix things ASAP."
At least PoS is working as usual. 
I might switch 100% PoS(especially with the current price), so not too run into the PoW troubles. 
I stopped PoW a while back - didn't seem to yield much on my old i7's I might switch 100% PoS(especially with the current price), so not too run into the PoW troubles.
At least PoS is working as usual. I might switch 100% PoS(especially with the current price), so not too run into the PoW troubles.
I might switch 100% PoS(especially with the current price), so not too run into the PoW troubles. 
most mining is back to orphans again. The fox must be out.
We've disabled XMG again on zpool until this is fixed/stopped.
We've disabled XMG again on zpool until this is fixed/stopped.
https://media.giphy.com/media/6LxGaLrEdGNHi/giphy.gif
I finished doing some
V, I think it would be of some value if you explained the testing that you were doing. Were you attempting to see if the previous flaw was fixed, thereby exposing it? Do you have any code recommendations that came out of your testing? I encourage you to share your results and make recommendations for the good of the coin.
hearts and flowers,
Hocus
Hi there!
Did you follow the steps in this guide already?
http://telegra.ph/MAGI-PROOF-OF-STAKE-MINTING-MANUAL-01-09
I tried to do the instructions, and at me all has turned out. now my wallet is working in mode PoS. Thank you for your help.
what is happening?
most mining is back to orphans again. The fox must be out.
We've disabled XMG again on zpool until this is fixed/stopped.
We've disabled XMG again on zpool until this is fixed/stopped.
https://media.giphy.com/media/6LxGaLrEdGNHi/giphy.gif
I finished doing some
most mining is back to orphans again. The fox must be out.
We've disabled XMG again on zpool until this is fixed/stopped.
We've disabled XMG again on zpool until this is fixed/stopped.
Thanks
Think it was just my connection playing up. I restarted everything and left it for a few hours before starting the wallet.
I've now got 114 connections.
Good to hear =) Think it was just my connection playing up. I restarted everything and left it for a few hours before starting the wallet.
I've now got 114 connections.
Anyone seeing problems with peers in the wallet?
Just noticed today I'm only getting connected to a single peer (joe's main one)
Before you ask, Yes I've got listen=1 in my conf and been getting peers in the past.
It might be my system, it's been acting odd lately, so I'm going to a wipe and reinstall of Linux later today or tomorrow.
My connection has dropped a few times today as well.
Just noticed today I'm only getting connected to a single peer (joe's main one)
Before you ask, Yes I've got listen=1 in my conf and been getting peers in the past.
It might be my system, it's been acting odd lately, so I'm going to a wipe and reinstall of Linux later today or tomorrow.
My connection has dropped a few times today as well.
I'm connected to 7 peers, which still isn't massive - total network height is 289180, so I'm pretty sure I'm not on a forked chain
You could always add some more 1.4.6.2 nodes using the following link
https://chainz.cryptoid.info/xmg/#!network
I had the same issue when I was running 1.4.6.1
Thanks
Think it was just my connection playing up. I restarted everything and left it for a few hours before starting the wallet.
I've now got 114 connections.
Anyone seeing problems with peers in the wallet?
Just noticed today I'm only getting connected to a single peer (joe's main one)
Before you ask, Yes I've got listen=1 in my conf and been getting peers in the past.
It might be my system, it's been acting odd lately, so I'm going to a wipe and reinstall of Linux later today or tomorrow.
My connection has dropped a few times today as well.
Just noticed today I'm only getting connected to a single peer (joe's main one)
Before you ask, Yes I've got listen=1 in my conf and been getting peers in the past.
It might be my system, it's been acting odd lately, so I'm going to a wipe and reinstall of Linux later today or tomorrow.
My connection has dropped a few times today as well.
I'm connected to 7 peers, which still isn't massive - total network height is 289180, so I'm pretty sure I'm not on a forked chain
You could always add some more 1.4.6.2 nodes using the following link
https://chainz.cryptoid.info/xmg/#!network
I had the same issue when I was running 1.4.6.1
Anyone seeing problems with peers in the wallet?
Just noticed today I'm only getting connected to a single peer (joe's main one)
Before you ask, Yes I've got listen=1 in my conf and been getting peers in the past.
It might be my system, it's been acting odd lately, so I'm going to a wipe and reinstall of Linux later today or tomorrow.
My connection has dropped a few times today as well.
Just noticed today I'm only getting connected to a single peer (joe's main one)
Before you ask, Yes I've got listen=1 in my conf and been getting peers in the past.
It might be my system, it's been acting odd lately, so I'm going to a wipe and reinstall of Linux later today or tomorrow.
My connection has dropped a few times today as well.
Is there a more stable Android miner than NeoNeonMiner? My lowpower recycled phones seem to have trouble running the app with the ad server it uses.
When you register the app and put in the code from the email you receive, the app is more stable.
No more ads to interrupt process.
Jump to: