[ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay] - page 73.

flippintwit

member

Activity: 62

Merit: 10

Quote from: jonathin.r on May 17, 2018, 08:56:03 PM

If someone can confirm that the block height of my wallet is correct (indicating that I'm on the same chain as everyone else), then I'd be willing to upload a snapshot of my blocks and database folder like I said I was going to, but never got around to.

My wallet is on 1825759.

Wallet: V1.4.6.2

May 17, 2018 ~22:05 EDT ( GMT -4 )

Current Number of Blocks: 1825774
Estimated Total Blocks: 1825755

jonathin.r

member

Activity: 98

Merit: 11

Quote from: Pyroboby7 on May 17, 2018, 08:17:46 PM

You can try deleting the database and blocks folder along with the peers.dat. I would download the latest blockchain from Joes links and then try again. This will speed up your syncing time by a lot.

As far as the config file, I don't believe you need to change anything. Hopefully others chime in.

If someone can confirm that the block height of my wallet is correct (indicating that I'm on the same chain as everyone else), then I'd be willing to upload a snapshot of my blocks and database folder like I said I was going to, but never got around to.

My wallet is on 1825759.

Pyroboby7

member

Activity: 94

Merit: 10

Quote from: Appletatoes on May 17, 2018, 06:38:16 PM

Quote from: Pyroboby7 on May 17, 2018, 04:10:27 PM

Quote from: Appletatoes on May 17, 2018, 03:08:53 PM

Quote from: Pyroboby7 on May 17, 2018, 02:47:38 PM

Quote from: Appletatoes on May 17, 2018, 02:42:48 PM

Yeah my wallet is missing a transaction I made last night. I transferred money to my wallet and it is not showing up but the blocks are synced now.

What should I do?

Go to the console in the wallet, type checkwallet. If it doesnt say true, then type repairwallet after that and restart your wallet. Should fix it.

Still missing my transaction from last night. I read somewhere about a --rescan? Where do I put this? I think in the executable of the magi.exe but not exactly sure.

Its in the console window that you could run that. What did the console window say when you ran the check wallet?

I had missing coins as well. Had to wipe the blocks and database folder along with the peers.dat file and after resyncing everything was good.

"Wallet check passed": true for both the checkwallet and repairwallet commands.

Everything is synced right now but should I try deleting the database and blocks folder along with peers.dat file, then relaunch the coin magi - wallet? What about the magi.conf file. What should the settings in there be like?

You can try deleting the database and blocks folder along with the peers.dat. I would download the latest blockchain from Joes links and then try again. This will speed up your syncing time by a lot.

As far as the config file, I don't believe you need to change anything. Hopefully others chime in.

Appletatoes

newbie

Activity: 9

Merit: 0

Quote from: Pyroboby7 on May 17, 2018, 04:10:27 PM

Quote from: Appletatoes on May 17, 2018, 03:08:53 PM

Quote from: Pyroboby7 on May 17, 2018, 02:47:38 PM

Quote from: Appletatoes on May 17, 2018, 02:42:48 PM

Yeah my wallet is missing a transaction I made last night. I transferred money to my wallet and it is not showing up but the blocks are synced now.

What should I do?

Go to the console in the wallet, type checkwallet. If it doesnt say true, then type repairwallet after that and restart your wallet. Should fix it.

Still missing my transaction from last night. I read somewhere about a --rescan? Where do I put this? I think in the executable of the magi.exe but not exactly sure.

Its in the console window that you could run that. What did the console window say when you ran the check wallet?

I had missing coins as well. Had to wipe the blocks and database folder along with the peers.dat file and after resyncing everything was good.

"Wallet check passed": true for both the checkwallet and repairwallet commands.

Everything is synced right now but should I try deleting the database and blocks folder along with peers.dat file, then relaunch the coin magi - wallet? What about the magi.conf file. What should the settings in there be like?

Pyroboby7

member

Activity: 94

Merit: 10

Quote from: Appletatoes on May 17, 2018, 03:08:53 PM

Quote from: Pyroboby7 on May 17, 2018, 02:47:38 PM

Quote from: Appletatoes on May 17, 2018, 02:42:48 PM

Yeah my wallet is missing a transaction I made last night. I transferred money to my wallet and it is not showing up but the blocks are synced now.

What should I do?

Go to the console in the wallet, type checkwallet. If it doesnt say true, then type repairwallet after that and restart your wallet. Should fix it.

Still missing my transaction from last night. I read somewhere about a --rescan? Where do I put this? I think in the executable of the magi.exe but not exactly sure.

Its in the console window that you could run that. What did the console window say when you ran the check wallet?

I had missing coins as well. Had to wipe the blocks and database folder along with the peers.dat file and after resyncing everything was good.

xms

full member

Activity: 223

Merit: 100

Quote from: Appletatoes on May 17, 2018, 03:08:53 PM

Quote from: Pyroboby7 on May 17, 2018, 02:47:38 PM

Quote from: Appletatoes on May 17, 2018, 02:42:48 PM

Yeah my wallet is missing a transaction I made last night. I transferred money to my wallet and it is not showing up but the blocks are synced now.

What should I do?

Go to the console in the wallet, type checkwallet. If it doesnt say true, then type repairwallet after that and restart your wallet. Should fix it.

Still missing my transaction from last night. I read somewhere about a --rescan? Where do I put this? I think in the executable of the magi.exe but not exactly sure.

try checkwallet and repairwallet

Appletatoes

newbie

Activity: 9

Merit: 0

Quote from: Pyroboby7 on May 17, 2018, 02:47:38 PM

Quote from: Appletatoes on May 17, 2018, 02:42:48 PM

Yeah my wallet is missing a transaction I made last night. I transferred money to my wallet and it is not showing up but the blocks are synced now.

What should I do?

Go to the console in the wallet, type checkwallet. If it doesnt say true, then type repairwallet after that and restart your wallet. Should fix it.

Still missing my transaction from last night. I read somewhere about a --rescan? Where do I put this? I think in the executable of the magi.exe but not exactly sure.

Pyroboby7

member

Activity: 94

Merit: 10

Quote from: Appletatoes on May 17, 2018, 02:42:48 PM

Yeah my wallet is missing a transaction I made last night. I transferred money to my wallet and it is not showing up but the blocks are synced now.

What should I do?

Go to the console in the wallet, type checkwallet. If it doesnt say true, then type repairwallet after that and restart your wallet. Should fix it.

Appletatoes

newbie

Activity: 9

Merit: 0

Yeah my wallet is missing a transaction I made last night. I transferred money to my wallet and it is not showing up but the blocks are synced now.

What should I do?

jonathin.r

member

Activity: 98

Merit: 11

My burning question now is since everything seems to have calmed down *knock on wood*, can I start connecting to nodes other than the dev node and not cause Magi Y2K?

Also, if I just jinxed it, I apologize in advance Grin

Appletatoes

newbie

Activity: 9

Merit: 0

Looks like I'm in sync now. Be sure to check your firewall settings too everyone.

I apparently don't have the transaction I made the other night. I transferred around 3 coins to my wallet but it only has the old balance. It showed the proper balance earlier today but now that it is in sync it is only showing the old balance. I already tried checkwallet and repairwallet.

Any ideas?

Thank you,
Appletatoes

Appletatoes

newbie

Activity: 9

Merit: 0

Quote from: s0litaire on May 17, 2018, 11:41:31 AM

Quick reminder

Latest wallet is

1.4.6.2

https://bitcointalksearch.org/topic/m.37528204

Oh my thank you!

s0litaire

member

Activity: 133

Merit: 15

Quote from: Appletatoes on May 17, 2018, 10:41:27 AM

Hello,

Could anyone please explain to me what Sign Message and Verify Message is for under File in Coin Magi - Wallet?

Also, my wallet still says out of sync but there is no loading bar at the bottom indicating total amount of the blocks left to download. Hovering over the bottom right indicator says downloaded 1824722 of transaction history and it still says it is Catching up.

Thank you,
Appletatoes

"Sign and verify" message is a feature that lets a person write a message and create a digital signature using their magi address.

The plain text message and "digital signature" can then be sent to another person who can use the "signature" to determine if the message is from who it claims to be from and has not been altered.

It's not used that much in any crypto currency to my knowledge.

Pyroboby7

member

Activity: 94

Merit: 10

Quote from: Appletatoes on May 17, 2018, 11:37:01 AM

Quote from: DisasterFaster on May 17, 2018, 10:58:19 AM

Quote from: Appletatoes on May 17, 2018, 10:41:27 AM

Hello,

Could anyone please explain to me what Sign Message and Verify Message is for under File in Coin Magi - Wallet?

Also, my wallet still says out of sync but there is no loading bar at the bottom indicating total amount of the blocks left to download. Hovering over the bottom right indicator says downloaded 1824722 of transaction history and it still says it is Catching up.

Thank you,
Appletatoes

Looks like we are both stuck on that exact same block number.

I went to a block explorer and copied out a bunch of node IP's on the same version as me and then added those to my .conf file. Rebooted the wallet and now have 5 solid connections and guess what... I am still stuck at block 1824722.

Hopefully we can get some more feedback from other users and/or the dev so we can figure out what's going on and how to correct it...

Yeah so it's not just me. I even updated the Coin Magi - Wallet to the newest 1.4.6.1 and followed the instructions here: https://bitcointalksearch.org/topic/m.37465271

Any chance you may be able to explain what the Sign Message and Verify Message does in the wallet?

Appletatoes

Newest wallet is 1.4.6.2

s0litaire

member

Activity: 133

Merit: 15

Quick reminder

Latest wallet is

1.4.6.2

https://bitcointalksearch.org/topic/m.37528204

Appletatoes

newbie

Activity: 9

Merit: 0

Quote from: DisasterFaster on May 17, 2018, 10:58:19 AM

Quote from: Appletatoes on May 17, 2018, 10:41:27 AM

Hello,

Could anyone please explain to me what Sign Message and Verify Message is for under File in Coin Magi - Wallet?

Also, my wallet still says out of sync but there is no loading bar at the bottom indicating total amount of the blocks left to download. Hovering over the bottom right indicator says downloaded 1824722 of transaction history and it still says it is Catching up.

Thank you,
Appletatoes

Looks like we are both stuck on that exact same block number.

I went to a block explorer and copied out a bunch of node IP's on the same version as me and then added those to my .conf file. Rebooted the wallet and now have 5 solid connections and guess what... I am still stuck at block 1824722.

Hopefully we can get some more feedback from other users and/or the dev so we can figure out what's going on and how to correct it...

Yeah so it's not just me. I even updated the Coin Magi - Wallet to the newest 1.4.6.1 and followed the instructions here: https://bitcointalksearch.org/topic/m.37465271

Any chance you may be able to explain what the Sign Message and Verify Message does in the wallet?

Appletatoes

s0litaire

member

Activity: 133

Merit: 15

Quote from: DisasterFaster on May 17, 2018, 10:18:25 AM

I replaced my entire blockchain and loaded up the new wallet and was able to get fully synchronized yesterday.

I woke up this morning and so far all day my wallet just says 17 hours behind and won't synchronize.

In my .conf I have this: connect=104.128.225.215

Looking in console at getinfo... I seem to be stuck at block >>> "blocks" : 1824722,

Does anybody have a list of known good node IP's I can use so I can get my wallet synchronized and keep it up to date with the proper chain?

what does it say in the debug.log file?
Is their any messages like "(connection refused)"?
and what version of the wallet are you running?

DisasterFaster

sr. member

Activity: 770

Merit: 264

Quote from: Appletatoes on May 17, 2018, 10:41:27 AM

Hello,

Could anyone please explain to me what Sign Message and Verify Message is for under File in Coin Magi - Wallet?

Also, my wallet still says out of sync but there is no loading bar at the bottom indicating total amount of the blocks left to download. Hovering over the bottom right indicator says downloaded 1824722 of transaction history and it still says it is Catching up.

Thank you,
Appletatoes

Looks like we are both stuck on that exact same block number.

I went to a block explorer and copied out a bunch of node IP's on the same version as me and then added those to my .conf file. Rebooted the wallet and now have 5 solid connections and guess what... I am still stuck at block 1824722.

Hopefully we can get some more feedback from other users and/or the dev so we can figure out what's going on and how to correct it...

Appletatoes

newbie

Activity: 9

Merit: 0

Hello,

Could anyone please explain to me what Sign Message and Verify Message is for under File in Coin Magi - Wallet?

Also, my wallet still says out of sync but there is no loading bar at the bottom indicating total amount of the blocks left to download. Hovering over the bottom right indicator says downloaded 1824722 of transaction history and it still says it is Catching up.

Thank you,
Appletatoes

DisasterFaster

sr. member

Activity: 770

Merit: 264

I replaced my entire blockchain and loaded up the new wallet and was able to get fully synchronized yesterday.

I woke up this morning and so far all day my wallet just says 17 hours behind and won't synchronize.

In my .conf I have this: connect=104.128.225.215

Looking in console at getinfo... I seem to be stuck at block >>> "blocks" : 1824722,

Does anybody have a list of known good node IP's I can use so I can get my wallet synchronized and keep it up to date with the proper chain?

Topic: [ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay] - page 73. (Read 2375926 times)