without HW. 
Topic: [ANN] Yet another GPU miner release! [YAC] - page 4. (Read 53369 times)
On HD7970 with intensyty -11 i have 40Khs without HW.
without HW.
2 gigs
No worries, the card has some problems anyways (have to turn the core down to 800 in 3D games or the driver crashes, mining at 850 and higher is fine though) and made ROI at least five times. Still think i should build a rig with 5 used 5770 for 300€.
No worries, the card has some problems anyways (have to turn the core down to 800 in 3D games or the driver crashes, mining at 850 and higher is fine though) and made ROI at least five times. Still think i should build a rig with 5 used 5770 for 300€.
How much ram does your system have? I have 16gb so maybe thats why I can go so high. Every N change the memory needed to solve a hash increases so i guess its all connected some how.
edit: maybe lol
edit: maybe lol
Interestingly cgminer won't start at TC 10240, but raising it to 8000 indeed solved my HW errors issue. 
edit: nope just a bit less A:3 HW:2, playing with TC now.
Had it at 5120 before, after the last n change the card didn't accept many TC values at all.
edit: 8096 and 8192 seem to be good.
edit: nope just a bit less A:3 HW:2, playing with TC now.Had it at 5120 before, after the last n change the card didn't accept many TC values at all.
edit: 8096 and 8192 seem to be good.
My 5770 seems to be ok at -I 10 like you said, core 950 mem 1250 --worksize 64 --lookup-gap 2 -I 10 --thread-concurrency 10240. no HW errors so far, 13.26 kh/s. at -I 11 it was 16 kh/s with a ton of hw's 
When I lower the intensity on the 7970 the drop is like 20 kh/s though , way too much... working on that.
When I lower the intensity on the 7970 the drop is like 20 kh/s though , way too much... working on that.
Well my 5770 gets 12.25Kh (half a 7970! ), A:15 HW: 87 after 10 minutes, seems like the HW errors can be ignored for now (at least at I 10).
), A:15 HW: 87 after 10 minutes, seems like the HW errors can be ignored for now (at least at I 10).
All 3 of my gpus work, it's just they don't work at the intended speed (HW every 3 secs ). My 7970 was getting 110 kh/s before N change (-w 256 --lookup-gap 2 -I 13 --thread-concurrency 32832 -g 1), as the change happened it went down to 50 kh/s. Once restarted the miner the only stable speed is 25 kh/s (-i 12). This happens every n change , it's all me being a stupid mother fucker!.
I have 10 hw's just from starting the miner lol
I have 10 hw's just from starting the miner lol
So no one's GPU is working? Did you try Intensity 10 (only way my card worked after last n change)?
Maybe HW errors can be ignored since the miner still delivers accepted shares. (A2 HW 8 this try)
Maybe HW errors can be ignored since the miner still delivers accepted shares. (A2 HW 8 this try)
I know the 5xxx were not ment to be that great this N change though 
my 5770 was the last to try, i just want to get my 7970 up and going first, then the 5770....and maybe the 5570 (max on that atm in 6 kh/s lol)
Even on intensity 10 my 5770 gets lots of HW errors (A 1, HW 20). 
Guess I'm not alone, the hash rate at my p2pool node is a quarter of what it was before the n change, probably only CPUs are left.
Guess I'm not alone, the hash rate at my p2pool node is a quarter of what it was before the n change, probably only CPUs are left.
i hate this bs every n change!
i have 2 5870, running 50 too, but with some HW... Lookup gap 4 16k TC g1 I16
My 5850's are getting about 50 KH/S each. Weak, but I'm still pleased.
That's pretty good I would say! I'm running my 5870 at stock speeds and I'm right about 51 KH/sec.
My 5850's are getting about 50 KH/S each. Weak, but I'm still pleased.
I'm reinstalling my system soon, should be able to improve performance noticeably.
I have 160Khs on HD7970.
I'm getting 134 with my 7970 on the current N.
I'm getting 130 with my 7950 on the current N..
I get 65kh/s snif :/ I'm getting 134 with my 7970 on the current N.
I'm getting 130 with my 7950 on the current N..
I'm getting 134 with my 7970 on the current N.
134??? wth? How? :p
Jump to: