[ANN] Yet another GPU miner release! [YAC] - page 6.

paulthetafy

hero member

Activity: 820

Merit: 1000

Quote from: feeleep on July 03, 2013, 05:43:37 AM

Guys,

I am still looking for best settings for my 5870 and 5850. Currently i use following:

yacminer -o yacp.coinmine.pl:9088 -u feeleep.1 -p x --scrypt --no-submit-stale --auto-fan --temp-target 70 -s 5 --expiry 5 --gpu-engine 785 800 --gpu-memclock 1050 1000 -I 15 16 -w 64 --lookup-gap 2 --thread-concurrency 8000 -g 1

and on both cards I've got almost the same:

GPU 0: 65.0C 2449RPM | 130.7K/128.4Kh/s
GPU 1: 67.5C 2602RPM | 129.4K/129.0Kh/s

additionally when i increase engine clock on 5870 hashrate drops...

any advise?

hey feeleep, I'm not sure about the 5XXX cards, but on my 7950 I found that having a lower TC allowed me to up the I to 18-20 without errors. Don't forget to add --powertune 20 too

feeleep

legendary

Activity: 1197

Merit: 1000

Guys,

I am still looking for best settings for my 5870 and 5850. Currently i use following:

yacminer -o yacp.coinmine.pl:9088 -u feeleep.1 -p x --scrypt --no-submit-stale --auto-fan --temp-target 70 -s 5 --expiry 5 --gpu-engine 785 800 --gpu-memclock 1050 1000 -I 15 16 -w 64 --lookup-gap 2 --thread-concurrency 8000 -g 1

and on both cards I've got almost the same:

GPU 0: 65.0C 2449RPM | 130.7K/128.4Kh/s
GPU 1: 67.5C 2602RPM | 129.4K/129.0Kh/s

additionally when i increase engine clock on 5870 hashrate drops...

any advise?

micabg

newbie

Activity: 33

Merit: 0

Quote from: kcanup on July 02, 2013, 01:57:09 PM

Any idea Why my radeon 7970 hashing so poor guys? Its not even 100 khash/s, is it normal? (Windows 7, latest amd drivers, yacminer mikaelh's latest compile)

yacminer --scrypt -w 128 --lookup-gap 2 -I 17 --thread-concurrency 8192 -g 1 (I tried few settings, didnt work either)

try -g 2

Thirtybird

hero member

Activity: 693

Merit: 500

Quote from: kcanup on July 02, 2013, 02:19:56 PM

Quote from: fenican on July 02, 2013, 02:08:43 PM

I use these setting with the V7 CL:

yacminer --scrypt -w 256 --gpu-threads 2 --auto-gpu --expiry 1 --shaders 2048 --lookup-gap 2 --thread-concurrency 8192 --intensity 12 --worksize 256 --gpu-engine 900-1100 --gpu-memclock 1500

Getting about 265 kh/s per GPU

Tried your settings but its same. My miner actually shows hashing speed around 270 khash/s but there on the pool (any pool) i dont see my hash rates going up more than 100 khash/s.... Cry

pools almost never show an accurate hashrate. If your miner is showing a hashrate and you don't have a lot of HW errors or rejects, you're hashing at the speed it's saying...

kcanup

legendary

Activity: 1484

Merit: 1000

Quote from: fenican on July 02, 2013, 02:08:43 PM

I use these setting with the V7 CL:

yacminer --scrypt -w 256 --gpu-threads 2 --auto-gpu --expiry 1 --shaders 2048 --lookup-gap 2 --thread-concurrency 8192 --intensity 12 --worksize 256 --gpu-engine 900-1100 --gpu-memclock 1500

Getting about 265 kh/s per GPU

Tried your settings but its same. My miner actually shows hashing speed around 270 khash/s but there on the pool (any pool) i dont see my hash rates going up more than 100 khash/s.... Cry

fenican

hero member

Activity: 1395

Merit: 505

Quote from: kcanup on July 02, 2013, 01:57:09 PM

Any idea Why my radeon 7970 hashing so poor guys? Its not even 100 khash/s, is it normal? (Windows 7, latest amd drivers, yacminer mikaelh's latest compile)

yacminer --scrypt -w 128 --lookup-gap 2 -I 17 --thread-concurrency 8192 -g 1 (I tried few settings, didnt work either)

I use these setting with the V7 CL:

yacminer --scrypt -w 256 --gpu-threads 2 --auto-gpu --expiry 1 --shaders 2048 --lookup-gap 2 --thread-concurrency 8192 --intensity 12 --worksize 256 --gpu-engine 900-1100 --gpu-memclock 1500

Getting about 265 kh/s per GPU

kcanup

legendary

Activity: 1484

Merit: 1000

Any idea Why my radeon 7970 hashing so poor guys? Its not even 100 khash/s, is it normal? (Windows 7, latest amd drivers, yacminer mikaelh's latest compile)

yacminer --scrypt -w 128 --lookup-gap 2 -I 17 --thread-concurrency 8192 -g 1 (I tried few settings, didnt work either)

6strings

sr. member

Activity: 441

Merit: 250

Thanks again mikaelh!

ivanlabrie

hero member

Activity: 812

Merit: 1000

Quote from: mikaelh on July 01, 2013, 11:34:21 AM

I released my own version based on hanzac's code:
https://bitcointalksearch.org/topic/annyac-yacminer-gpu-miner-for-yacoin-247782

Includes a fix for share difficulty calculation. No more bogus spam about blocks being found all the time.

Thanks will test it right away!

rbdrbd

sr. member

Activity: 462

Merit: 250

Quote from: mikaelh on July 01, 2013, 11:30:50 AM

Quote from: rbdrbd on July 01, 2013, 08:50:38 AM

Can anyone provide a list of peers that accept inbound connections?

Here's a list of peers I grabbed from my yacoind:

I've also been having a number of issues with pools, so I'm solo-mining at the moment. Let's hope feeleep gets stratum working.

Thank you!! I'm trying out your modified cgminer now... seems to work better than the one I was using at first glance. We'll see if it helps out with the pool slowdown issues I've been having. Will also test out solo mining as well with it.

mikaelh

sr. member

Activity: 301

Merit: 250

I released my own version based on hanzac's code:
https://bitcointalksearch.org/topic/annyac-yacminer-gpu-miner-for-yacoin-247782

Includes a fix for share difficulty calculation. No more bogus spam about blocks being found all the time.

mikaelh

sr. member

Activity: 301

Merit: 250

Quote from: rbdrbd on July 01, 2013, 08:50:38 AM

Can anyone provide a list of peers that accept inbound connections?

Here's a list of peers I grabbed from my yacoind:

Code:

37.59.119.242
199.204.38.210
184.175.53.111
88.198.92.150
109.80.94.251
198.199.80.210
106.187.96.135
50.56.186.88
54.244.109.130
140.112.183.10
95.138.185.176
72.46.155.34
95.90.147.164
174.56.58.238
110.211.43.56
95.178.181.163

I've also been having a number of issues with pools, so I'm solo-mining at the moment. Let's hope feeleep gets stratum working.

rbdrbd

sr. member

Activity: 462

Merit: 250

Hey guys,

I'm having an issue where my miner's performance seems to sputter out on the pools after awhile quite often (the clock rates are fine, and performance is stable on other coins...but with YAC cgminer's "Active" percentage can go anywhere from 0-80% after awhile). Anyone else seen this?

Also, I want to try out solomining, but two issues seem to prevent this:
1. yacoind cannot make a connection to the IRC server to get peers
2. All of the peers I have/find do not accept inbound connections

Can anyone provide a list of peers that accept inbound connections?

feeleep

legendary

Activity: 1197

Merit: 1000

Quote from: mikaelh on July 01, 2013, 07:54:20 AM

Quote from: feeleep on July 01, 2013, 07:38:42 AM

Guys,

I set up experimental stratum support on http://yac.coinmine.pl on port 9088, however when I tried to setup yacminer it cannot connect. I suppose it doesn't support stratum in this version but I may be wrong.

It would be beneficial if someone who has enough programming skills could check the source code of yacminer and say if stratum should work or not...

Anyway you are invited to test stratum if you can

feeleep

Your stratum pool is rejecting shares.

Code:

 yacminer version 3.2.1 - Started: [2013-07-01 15:48:41]
--------------------------------------------------------------------------------
 (5s):111.3K (avg):114.6Kh/s | A:0  R:8  HW:0  U:0.0/m  WU:84.5/m
 ST: 2  SS: 0  NB: 8  LW: 134  GF: 0  RF: 0
 Connected to yac.coinmine.pl diff 31 with stratum as user mikaelh.x
 Block: 5cc54263730eb5fe...  Diff:52.5K  Started: [15:52:43]  Best share: 338
--------------------------------------------------------------------------------
 [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:                | 114.9K/116.3Kh/s | A:0 R:8 HW:0 U:0.00/m I:17
--------------------------------------------------------------------------------

rypt' is n
 [2013-07-01 15:51:36] Network diff set to 52.5K
 [2013-07-01 15:51:36] Stratum from pool 0 detected new block
 [2013-07-01 15:51:40] Rejected a4a838e1 Diff 286/31 GPU 0  (global name 'ltc_sc
rypt' is n
 [2013-07-01 15:51:46] Rejected f04a3094 Diff 111/31 GPU 0  (global name 'ltc_sc
rypt' is n
 [2013-07-01 15:51:51] Network diff set to 52.5K
 [2013-07-01 15:51:51] Stratum from pool 0 detected new block
 [2013-07-01 15:52:41] Rejected 93af4b8a Diff 63/31 GPU 0  (global name 'ltc_scr
ypt' is n
 [2013-07-01 15:52:43] Network diff set to 52.5K
 [2013-07-01 15:52:43] Stratum from pool 0 detected new block

This is my own version compiled from hanzac's source with a few fixes. Nothing that should affect stratum support though.

thanks for testing - i will analyze logs now

mikaelh

sr. member

Activity: 301

Merit: 250

Quote from: feeleep on July 01, 2013, 07:38:42 AM

Guys,

I set up experimental stratum support on http://yac.coinmine.pl on port 9088, however when I tried to setup yacminer it cannot connect. I suppose it doesn't support stratum in this version but I may be wrong.

It would be beneficial if someone who has enough programming skills could check the source code of yacminer and say if stratum should work or not...

Anyway you are invited to test stratum if you can

feeleep

Your stratum pool is rejecting shares.

Code:

 yacminer version 3.2.1 - Started: [2013-07-01 15:48:41]
--------------------------------------------------------------------------------
 (5s):111.3K (avg):114.6Kh/s | A:0  R:8  HW:0  U:0.0/m  WU:84.5/m
 ST: 2  SS: 0  NB: 8  LW: 134  GF: 0  RF: 0
 Connected to yac.coinmine.pl diff 31 with stratum as user mikaelh.x
 Block: 5cc54263730eb5fe...  Diff:52.5K  Started: [15:52:43]  Best share: 338
--------------------------------------------------------------------------------
 [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:                | 114.9K/116.3Kh/s | A:0 R:8 HW:0 U:0.00/m I:17
--------------------------------------------------------------------------------

rypt' is n
 [2013-07-01 15:51:36] Network diff set to 52.5K
 [2013-07-01 15:51:36] Stratum from pool 0 detected new block
 [2013-07-01 15:51:40] Rejected a4a838e1 Diff 286/31 GPU 0  (global name 'ltc_sc
rypt' is n
 [2013-07-01 15:51:46] Rejected f04a3094 Diff 111/31 GPU 0  (global name 'ltc_sc
rypt' is n
 [2013-07-01 15:51:51] Network diff set to 52.5K
 [2013-07-01 15:51:51] Stratum from pool 0 detected new block
 [2013-07-01 15:52:41] Rejected 93af4b8a Diff 63/31 GPU 0  (global name 'ltc_scr
ypt' is n
 [2013-07-01 15:52:43] Network diff set to 52.5K
 [2013-07-01 15:52:43] Stratum from pool 0 detected new block

This is my own version compiled from hanzac's source with a few fixes. Nothing that should affect stratum support though.

EDIT: Same thing with hanzac's original version. Pool is rejecting all shares with the same message.

feeleep

legendary

Activity: 1197

Merit: 1000

Guys,

I set up experimental stratum support on http://yac.coinmine.pl on port 9088, however when I tried to setup yacminer it cannot connect. I suppose it doesn't support stratum in this version but I may be wrong.

It would be beneficial if someone who has enough programming skills could check the source code of yacminer and say if stratum should work or not...

Anyway you are invited to test stratum if you can

feeleep

forsetifox

sr. member

Activity: 266

Merit: 250

I've noticed the same strange behavior after turning off a bitcoin miner. Rebooting usually fixes that.

hpski

newbie

Activity: 25

Merit: 0

Is there any reason why my 7850 only gets 10-20 kh/s? The display driver also keeps constantly crashing at what seems to be -I 9(with -I 8 being tolerable), tested on both 13.5 and 13.6 Beta 2 drivers, no change whatsoever.

Can't get the CPU miner working, either. Undecided

BlazinBeaches

member

Activity: 98

Merit: 10

Let us know how your 4770k does, I'm wondering if AVX2 will make a difference vs the 3770k

ivanlabrie

hero member

Activity: 812

Merit: 1000

Quote from: hax0red on June 30, 2013, 11:15:40 AM

Quote from: hobble23 on June 30, 2013, 10:35:51 AM

I'm back on YAC again. Mining with a 7970 - HIS Turbo iceQ X2 3 GB. I'm getting 259. Once trick if you want to squeeze your CPU as well. If I set the affinity of cgminer (with priority high) to one core and the affinity of the other cores to the cpu miner - I can continue to pull 259 off of the GPU as well as pull hash off of the CPU. With litecoin - I can't do this. My card runs cooler on YAC as well.

Glad I'm not the only one doing this. I found I can run 6 threads on my 8350 which nets about 40 kh and I can run 3 on my athlon II x3 > unlocked to x4 @ 18-19 kh both with stock cooling, slight overclock.

Exactly! That's what I wanna do...waiting for my new 4770k to get here (ordered parts)

Topic: [ANN] Yet another GPU miner release! [YAC] - page 6. (Read 53360 times)