Topic: [ANN] Zcoin (XZC) - Implementing ZKP privacy without trusted setup - page 156. (Read 663229 times)

No numbers announced yet, maybe there is some rumors on the slack but i did not hear any numbers for now...

HI, could anyone tell me the minimum xzc necessary for creating a znode (masternode)? Also, what is the purpose of this special nodes on this coin? Thanks

Zcoin Dev Update 19 September 2017: Znodes, GUI, libzerocoin, MTP and ZEth



Znodes
At the same time, work will begin on Znodes, the long awaited update that allows incentivized nodes to support the Zcoin network and makes Zcoin into a hybrid Proof of Work and Proof of Stake system. Znode owners will earn a proportion of the block rewards as an incentive to maintain a full node, keep it updated and maintain the network. A certain number of Zcoin will be required as a ‘collateral’ to start a Znode to discourage Sybil attacks. This number will be announced as we come closer to launch but we aim to achieve a balance between allowing people to participate while maintaining a decent profitability for node owners to keep them sufficiently incentivized.

have you checked to see if that version supports your compute? might be the issue. i assume your talking about https://github.com/djm34/ccminer-msvc2015/releases? what quadro 2000? P? K? or just the normal Quadro 2000? haha
Check your compute version for compatibility i would say (if lower intensity didnt help),  good luck!

   *** xmrMiner 0.2.1 (64 bit) for NVIDIA GPUs by psychocrypt
    *** Built with GCC 5.4  using the Nvidia CUDA Toolkit 8.0

 psychocrypt's XMR donation address:
   43NoJVEXo21hGZ6tDG6Z3g4qimiGdJPE6GRxAmiWwm26gwr62Lqo7zRiCJFSBmbkwTGNuuES9ES5Tga VHceuYc4Y75txCTU
 for more donation addresses please read the README.md
-----------------------------------------------------------------
[2017-09-23 03:26:13] Using JSON-RPC 2.0
[2017-09-23 03:26:13] Starting Stratum on stratum+tcp://pool.supportxmr.com:5555
[2017-09-23 03:26:15] 1 miner threads started, using 'cryptonight' algorithm.
[2017-09-23 03:26:15] GPU #0: Quadro 2000 (4 SMX), using 24 blocks of 19 threads
[2017-09-23 03:26:19] Pool set diff to 5000
[2017-09-23 03:26:19] Stratum detected new block
[2017-09-23 03:26:20] GPU #0: Quadro 2000, 92.17 H/s
[2017-09-23 03:27:18] Stratum detected new block
[2017-09-23 03:27:20] GPU #0: Quadro 2000, 98.95 H/s
[2017-09-23 03:27:39] Pool set diff to 2727
[2017-09-23 03:27:39] Stratum detected new block
[2017-09-23 03:27:43] GPU #0: Quadro 2000, 99.08 H/s
[2017-09-23 03:28:01] GPU #0: Quadro 2000, 98.75 H/s
[2017-09-23 03:28:01] accepted: 1/1 (100.00%), 98.75 H/s (yay!!!)
[2017-09-23 03:28:08] Stratum detected new block
[2017-09-23 03:28:08] Stratum detected new block
[2017-09-23 03:28:11] GPU #0: Quadro 2000, 99.08 H/s

   ==================== www.nicehash.com ====================
      Equihash CPU&GPU Miner for NiceHash v0.4b
   Thanks to Zcash developers for providing base of the code.
          Special thanks to tromp, xenoncat, mbevand
                and eXtremal-ik7 for providing
         optimized CPU, CUDA and AMD equihash solvers.
   ==================== www.nicehash.com ====================

Setting log level to 2
[03:29:05][0x00007f71d0ffd740] Using SSE2: YES
[03:29:05][0x00007f71d0ffd740] Using AVX: YES
[03:29:05][0x00007f71d0ffd740] Using AVX2: NO
[03:29:05][0x00007f71cde0e700] stratum | Starting miner
[03:29:05][0x00007f71c7fff700] miner#2 | Starting thread #2 (cpu_xenoncat_STUB)
[03:29:05][0x00007f71c6ffd700] miner#4 | Starting thread #4 (cpu_xenoncat_STUB)
[03:29:05][0x00007f71cce0c700] miner#1 | Starting thread #1 (cpu_xenoncat_STUB)
[03:29:05][0x00007f71cd60d700] miner#0 | Starting thread #0 (cpu_xenoncat_STUB)
[03:29:05][0x00007f71c77fe700] miner#3 | Starting thread #3 (cpu_xenoncat_STUB)
[03:29:05][0x00007f71c5ffb700] miner#6 | Starting thread #6 (cpu_xenoncat_STUB)
[03:29:05][0x00007f71c67fc700] miner#5 | Starting thread #5 (cpu_xenoncat_STUB)
[03:29:05][0x00007f71c57fa700] miner#7 | Starting thread #7 (CUDA-TROMP) Quadro 2000 (#0) BLOCKS=28, THREADS=64
[03:29:05][0x00007f71cde0e700] stratum | Connecting to stratum server zec.f2pool.com:3357
[03:29:11][0x00007f71cde0e700] stratum | Connected!
[03:29:12][0x00007f71cde0e700] stratum | Subscribed to stratum server
[03:29:12][0x00007f71cde0e700] miner | Extranonce is 00000000000000000000000000000000
[03:29:12][0x00007f71cde0e700] stratum | Target set to 0007ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
[03:29:12][0x00007f71cde0e700] stratum | Received new job #GMUYIvi8UY
[03:29:12][0x00007f71cde0e700] stratum | Authorized worker t1SRQQYMBeBCavFkxzPDYioQqih3yTLCxDb
[03:29:15][0x00007f71d0ffd740] Speed [300 sec]: 0.298626 I/s, 0.298626 Sols/s
[03:29:25][0x00007f71d0ffd740] Speed [300 sec]: 1.09453 I/s, 1.8408 Sols/s
[03:29:27][0x00007f71cde0e700] stratum | Received new job #GMUYIvileg
[03:29:30][0x00007f71cde0e700] stratum | Received new job #GMUYIvisWE
[03:29:34][0x00007f71cde0e700] stratum | Received new job #GMUYIvj2FK
[03:29:35][0x00007f71d0ffd740] Speed [300 sec]: 1.19383 I/s, 2.02288 Sols/s

*** ccminer 0.0.2-djm34 for nVidia GPUs by djm34 ***
    Built with the nVidia CUDA Toolkit 8.0

  Originally based on Christian Buchner and Christian H. project based on tpruvot 1.8.4 release
  Include algos from alexis78, djm34, sp, tsiv and klausT.
  *** News (02/08/2017): lyra2Z algo for ZCoin

BTC donation address: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze (djm34)
ZCoin donation address: aChWVb8CpgajadpLmiwDZvZaKizQgHxfh5 (djm34)

[2017-09-23 03:31:58] Starting on stratum+tcp://asia.lyra2z-hub.miningpoolhub.com:20581
[2017-09-23 03:31:58] 1 miner thread started, using 'lyra2Z' algorithm.
[2017-09-23 03:32:05] Stratum difficulty set to 10 (0.03906)
[2017-09-23 03:32:05] GPU #0: Intensity set to 16, 65536 cuda threads
[2017-09-23 03:32:06] GPU #0: Quadro 2000, 7498.56 kH/s
[2017-09-23 03:32:06] GPU #0: invalid device function
[2017-09-23 03:32:06] GPU #0: invalid device function
[2017-09-23 03:32:09] GPU #0: invalid device function
[2017-09-23 03:32:12] GPU #0: Quadro 2000, 1495.94 MH/s
[2017-09-23 03:32:12] GPU #0: invalid device function
[2017-09-23 03:32:16] GPU #0: Quadro 2000, 1247.49 MH/s
[2017-09-23 03:32:16] GPU #0: invalid device function

Hi All,

I'm testing my machine for mining XZC coin using ccminer v0.0.3 forked by djm34.

my machine is Linux Ubuntu 16.04.3 LTS. GPU card I tested for compiling ccminer is NVIDIA Quadro 2000 with CUDA 8 driver.

First, I didn't found build.sh file in the tarball file. But since I'm quite familiar with compiling source, I did by using configure and make

another ccminer are work in this machine, I did test XMR ccminer and it works. but this ccminer for ZXC returns errors like this

.......

thanks in advance

Does not explain the CONSTANT 4400 kh/s on the pool when I get 7500 on miner.
I know about variation thank you.
Mined shit tons of coins, first time there is a such difference between pool and miner. I stopped mining XZC in june for this reason.
So yes, there is something wrong.

hahha thats a funny thing to say about mining, its called VARIANCE
you can use all the calculators you want till your blue in the face, they honestly DONT MEAN SHIT   a pool could hit 100 blocks a day, or ZERO ;p
ALL you can do is trust the pool operators and do the math of shares yourself AFTER you hit the blocks

"clearly something wrong" because you earned less than a calculator says.... LOL!~

EDIT: a 1080 does 2mh/s, some of mine are on zcoin right now

Thanks gurumeditation, but this is a price chart, not a network hashrate/difficulty chart.

Does anyone have a link to an all-time chart of ZCoin's network hashrate and difficulty? I suggest this is added to the website. It's quite important to miners and potential network supporters. The only thing I've come across are current network stats.

Where can I find an all-time chart of ZCoin's network hashrate and difficulty?