Topic: [ANN] Zilliqa Auto Switcher. Auto Mine ZIL, 0% Fees, HIVE + SMOS + more (Read 6224 times)

but here there is still no profitability with a regular flow of electricity, right?

i think this switcher works better and fine

https://github.com/Pashnov/zil_switcher

For those who want to mine 1 minute of ZIL and that's it...and not mine for 59 minutes
teamredminer.exe -a etchash -o stratum+tcp://incorrectserver:port -u etcwallet.workername -p x --zil -o stratum+tcp://eu.ezil.me:4444 -u etcwallet.zilwallet.workername -p x --zil_end
https://t.me/koliamainer/8258

ERG+ZIL+KAS is more profitable - depends on electricity. ERG use less power than ETHW.

ERG+ZIL = Teamredminer native support
RVN+ZIL = Teamredminer native support
VTC+ZIL = Teamredminer native support

Ethash+ZIL+KAS is also an option with lolminer - or wait some days Teamredminer is working on it - release will come in the next few days

By the way - mining RVN+ETHW together makes no sense - RVN is core and mem intensive - ETHW mem intensive - so both together will give you less hashrates for both algos.

I would guess this is a dead thread/solution but figured I would try anyway. I am attempting to dual mine Ravencoin and ZIL w/ TeamRedMiner on HiveOS platform. I read something about a script for using this on HiveOS. I found then downloaded an EXE file which would do me no help on a Linux OS. Plus I would be warry running an executable file without seeing the source code first.

If this is still supported and there is a solution for my configuration or if there is a comparable solution that will accomplish something similar. I'm trying to increase my revenue since the shutdown of ETH POW mining on the 15th of last month and Ravencoin is the highest paying crypto I've tried so far but still isn't cutting it.

I thought about doing dual mining with TON but TON is a power hog for what little it adds to daily revenue and I am already maxed out on power usage. Plus it puts a lot of strain on the GPUs ie added heat and overall load.

I've tried VERT, ETHW, ETC and RVN with RVN being slightly more profitable out of what I've tried. It's possible my GPU's weren't tuned optimally for those other Algos. I have all AMD GPUs 28x RX 580s 8GB from various manufacturers plus 1x RX 480 8GB, 1x RX 570 8GB and 1x 5700xt 8GB. If I was paying for the power I would be running at a huge loss luckily it is included in my rent but I am maxed out using 80amps on a 100amp main. I'm running all 240v PDUs/PSUs to get the most possible power since there is a 10% power gain due to the increased efficiency of 240v vs 120v.

I know I could do ETHW and ZIL dual mining without any additional software/scripts or wtv. I guess that could be worth a try but I made about 10%-20% less mining ETHW vs RVN. So RVN plus ZIL would be most profitable but depending on what ZIL added to the ETHW profitability it might hedge out just RVN alone.

If anyone knows of a more profitable form of GPU mining using the equipment I have I am all ears.

For any help or advice to point me in the right direction would be most greatly appreciated. Thanks in advance!

Last three hours Zil_Switcher has been switching too often (about twice an hour), and staying in zil mining for tens of minutes, instead of a minute or two. This is happening on two rigs.
Anyone else experience this? Any idea what could be wrong? It's been working well for a few weeks now, and I did not change anything.

Hey I did get the latest SRBMiner. It does work. Mining Ergo and then switching over to Ezil.me to mine ZIL. Which is pretty much the same as directly mining on Ezil for ETH or ETC. My goal was to use the Auto Switcher along with the ZIlMiner itself, and see how it goes that way. Which it does work, but of course does not with SRB MULTI. Which I still would like to test out using ZILMiner and see if it makes direct ZIL reward payouts and not have to use EZIL or any other pool that mines ZIL, and then their minimum payouts. Which in Ezil is 30 ZIL. But I am mining Ergo now and snagging the Zil on Ezil but still the same circumstance I had while mining there for ETH and ETC.

Thank you for pointing out the newer version of SRB MULTI that has the switching built in for Ergo. I was using an older Version of MULTI.  

PS: + 10 merit points for ya! lol 

Haven + ZIL:

https://www.youtube.com/watch?v=rNCuYWcFufE

Ergo + ZIL:

https://www.youtube.com/watch?v=N6Pt_5WMcng

Ya that is for dual eth/zil from within SRB. I am using the Auto Switcher to mine Ergo and or Haven. Switcher does not recognize the SRBMiner-MULTI. Only SRBMiner-CN.
But thanks for that vid link. May come in handy down the road  

I thought Srbminer already has built in not dual, but quad mining?

https://www.youtube.com/watch?v=MiIfu0H2ElQ

I have it working fine for SRBMiner-CN but it will not work with MULTI?

Apparently Option #3 only works with the CN. Miner??

Any suggestions?

Why?

Hey gang, testing this out now. Interesting.

Could you look into adding SRBMiner-MULTI

Thanks!
 

Quit the pause at the end of file of the bat of gminer

hello, I have an issue where if I leave Zil switcher alone and come back, it has opened multiple windows of the regular miner. in my case I am using Gminer and when I come back to the computer after several hours it has 5 gminer windows open. Another one of my friends has the same thing happen. not all the time, just an intermittent glitch. Any solutions? Thanks

👛 OWNR Wallet – is a secure and convenient non-custodial cryptocurrency wallet that allows you to manage your cryptocurrencies by storing them in encrypted storage on your device. Similar to Atomic Wallet, Exodus, Jaxx, Trust Wallet, but more convenient and better!

Visa cryptocard: Directly in your OWNR wallet or on the website, you can apply for a Visa crypto card. Credit your card instantly with cryptocurrency, pay your purchases at corner shops and in your favorite online services.

Buy crypto in a wallet: You can also buy and exchange cryptocurrency directly in your OWNR wallet at a favorable rate for you.

Withdraw cryptocurrencies with OWNR wallet: Sell cryptocurrencies and receive fiat funds to your Visa/Mastercard card in a few clicks.

Supports cryptocurrencies: BTC, BCH, BNB, TRX, LTC, ETH, SOL, ZEC, DASH, DOGE, MATIC, AVAX. Also supports USDT/USDC stablecoins in ETH, SOL, TRON, BNB

Please add support for VerthashMiner.

Hi, is there a way to pass the --mt 5 to the gminer and to change the pool where gminer mine zilliqa, because i have a 1080 (--mt 5 to go from 20 to 34 mh) and im in argentina, so the pool in asia is giving my high pings.
Or a config file like the claymore and phoenix miner??
Thanks for the great work

Check out the thread description / title. It states it will work with HiveOS and simplemining OS etc

Then install telegram, it is used by many guys for giving support and so on. But i don´t think that hiveos will integrate this, zilliqa is not so important for many other.