Topic: [ANN] Zilliqa Auto Switcher. Auto Mine ZIL, 0% Fees, HIVE + SMOS + more - page 2. (Read 6244 times)
June 19, 2021, 07:57:48 PM
Trying to get ahold of @kidkid1 for Hiveos integration. Don't have telegram. Any other way?
June 14, 2021, 04:17:13 PM
Its not possible to simply past a wallet address and mine ZIL. You are forced to hand over the secret codes of your wallet. So take care of your codes. Never hand over your private key.
Want to take that risk? It's fine to me but I quit mining now. Never received ZIL in my wallet.
Want to take that risk? It's fine to me but I quit mining now. Never received ZIL in my wallet.
FIRST YOU DON`T NEED YOU PRIVATE KEY FOR THIS SWTICHER AND IT NEVER ASK FOR YOU PRIVATE KEY. DON`T TALK SHIT!!!!!!
Thats your fault dude, maybe you ask what the problem is and we can help you out but don´t spread bad vibes if you make a failure.
This software work fine and swaggadon is owner of shardpool, and he build a custom version of this switcher for me in the past and it work fine for me.
And by the way there are miners out for mining zil+eth or zil+erg without this switcher.
June 14, 2021, 03:55:06 PM
Its not possible to simply past a wallet address and mine ZIL. You are forced to hand over the secret codes of your wallet. So take care of your codes. Never hand over your private key.
Want to take that risk? It's fine to me but I quit mining now. Never received ZIL in my wallet.
Want to take that risk? It's fine to me but I quit mining now. Never received ZIL in my wallet.
April 13, 2021, 04:28:13 PM
hello can someone help me a bit? i am confused 
i am currently mining cfx with rtx3060 and t-rex on nanopool. Please can someone help me with bat file for zilswitcher...?
i created cfxzil.bat:
zil_switcher.exe -m 17 -r CFX-nanopool.bat -a myzillwallet -w myworker
- however seems zilminer doesnt work due of cuda 11 or something? is there other soft for nvidia whch can mine ZIL?
- i am from EU and it connected to asia1...
UPDATE:
maybe i can use trex to mine zil? is that possible?
- if yes how should bat file look like?
- how will ten custom bat file look like? is it correct below
zil_switcher.exe -m 0 -a myzilladress -w myworker -s zill.bat(the question is what should i put in the bat file to mine with trex?) -e CFX-nanopool.bat
i am currently mining cfx with rtx3060 and t-rex on nanopool. Please can someone help me with bat file for zilswitcher...?
i created cfxzil.bat:
zil_switcher.exe -m 17 -r CFX-nanopool.bat -a myzillwallet -w myworker
- however seems zilminer doesnt work due of cuda 11 or something? is there other soft for nvidia whch can mine ZIL?
- i am from EU and it connected to asia1...
UPDATE:
maybe i can use trex to mine zil? is that possible?
- if yes how should bat file look like?
- how will ten custom bat file look like? is it correct below
zil_switcher.exe -m 0 -a myzilladress -w myworker -s zill.bat(the question is what should i put in the bat file to mine with trex?) -e CFX-nanopool.bat
March 08, 2021, 11:12:58 AM
I am using teamredminer for mining eth on the 8GB card and CN on the 4 gb cards
I need to select which GPUs to use in a mixed rig and I am suppose to use -d command line.
Everything its fine running two instances.
Problems come when trying to dula mine zil
TRM doesn't have a config.txt like phoenix.
Before copying the phoenix miner into the trm directory......
there is another solution to select which GPU will double mine and which not?
I need to select which GPUs to use in a mixed rig and I am suppose to use -d command line.
Everything its fine running two instances.
Problems come when trying to dula mine zil
TRM doesn't have a config.txt like phoenix.
Before copying the phoenix miner into the trm directory......
there is another solution to select which GPU will double mine and which not?
February 28, 2021, 11:51:33 AM
The program suppose to check the best location based on ping to all pool servers, then assign it . We plan to redo the program from the ground up. We will include an option for choosing your location.
February 26, 2021, 12:06:50 PM
Something i want to know about and dont see anywhere... whats the minimum payout?
1 ZIL or something like it. February 26, 2021, 10:41:23 AM
Something i want to know about and dont see anywhere... whats the minimum payout?
February 25, 2021, 11:30:35 AM
Is there any way to change location for Shardpool? I live in EU but always get US or AS servers (whatever AS is) and always have over 250ms. I'm worried that it'll eventually lower my income (so far, no rejected shares though, but 250ms is a lot).
Same here, I'm from EU and always get connected to as1 server...thats Asia I guess
I've been getting a "lot" of shares that the miners see as accepted, but the pools see as stale, and I'm pretty sure it's happened at least a few times when mining ZIL as well. Miner says they're accepted, but due to high latency they could be stale.
February 25, 2021, 08:03:14 AM
Is there any way to change location for Shardpool? I live in EU but always get US or AS servers (whatever AS is) and always have over 250ms. I'm worried that it'll eventually lower my income (so far, no rejected shares though, but 250ms is a lot).
Same here, I'm from EU and always get connected to as1 server...thats Asia I guess
February 23, 2021, 01:04:43 PM
Is there any way to change location for Shardpool? I live in EU but always get US or AS servers (whatever AS is) and always have over 250ms. I'm worried that it'll eventually lower my income (so far, no rejected shares though, but 250ms is a lot).
February 20, 2021, 06:19:29 PM
Good, I will try this way. Thanks.
AS you are using it, how much time off it really take for mining 1 minute of Zil ?
AS you are using it, how much time off it really take for mining 1 minute of Zil ?
I told ya wrong....if you are going to use the custom scripts option it should look like this
zil_switcher.exe -m 0 -a (address) -w (workername) -s stop.bat(script to stop current miner) -e rvn-minermore-teamred.bat(miner you want to resume after mining zil)
Didn't need to have the extra script in front of the address as shown before.
February 19, 2021, 05:42:10 PM
sometimes it mines for about 1 1/2 minutes or so. Its really not that long. Its not long enough that my other pool I mine to resets and I lose my shares that I've been working on so that is a plus 
just remember you will have to create all your .bat files and commands and such
just remember you will have to create all your .bat files and commands and such
February 19, 2021, 05:33:39 PM
Good, I will try this way. Thanks.
AS you are using it, how much time off it really take for mining 1 minute of Zil ?
AS you are using it, how much time off it really take for mining 1 minute of Zil ?
February 19, 2021, 04:10:20 PM
I'm a little lost.
I'm mining with a small rig of 550 2gb Haven with Srbminer in criptonight with a run.bat
the tentative command line is:
zil_switcher .exe run.bat -a ziladdress
it report start/end option must not be empty
zil_switcher is located in the srbminer directory
do I have to point to a different ethash miner like phoenix for the etash part?
can you post an example with xmrig that is also supported but doesn't have ethash?
I'm mining with a small rig of 550 2gb Haven with Srbminer in criptonight with a run.bat
the tentative command line is:
zil_switcher .exe run.bat -a ziladdress
it report start/end option must not be empty
zil_switcher is located in the srbminer directory
do I have to point to a different ethash miner like phoenix for the etash part?
can you post an example with xmrig that is also supported but doesn't have ethash?
I mine RVN with a rig and I use Teamredminer but yes you will have to use a miner that supports ethash.
my bat file looks like this...
zil_switcher.exe -m 0 zilminerteamred.bat (or whichever miner you want to min Zil with) -a (your Zil address) -w (workername) -s stop.bat (this stops your current miner so make sure it points to that miner you want to stop) -e rvn-minermore-teamred.bat (this is the miner you want to resume after Zil does its thing)
soo zil_switcher.exe -m 0 zilminerteamred.bat -a ziladdress -w whatever -s stop.bat -e rvn-minermore-teamred.bat
February 19, 2021, 12:36:14 PM
I'm liking what you have done here and would like to try mining some Zil. I ran it for a bit last night but it has me mining on the EU pool and I live in the US. Is there a way to specify the US pool? I'm using teamredminer but I do not mine an ethash product.
**Edit**
I think I may have figured it out...hopefully. We'll see in about 1000 seconds
**2nd edit**
Nope..for some reason it keeps wanting to mine to the EU server, it isn't pulling my info from this command
zil_switcher.exe -m 0 zilminerteamred.bat -a zil1maff8t0qhsqyvl0rhh7np2w84tem3ngzcgu5ee -w stainedcrypto.570 -s stop.bat -e rvn-minermore-teamred.bat
everything operates correctly except that zilminerteamred.bat doesn't get started...it starts teamredminer and mines to the EU server but if I shut that down and launch the zilminerteamred.bat it uses the correct info and custom settings
**Edit**
I think I may have figured it out...hopefully. We'll see in about 1000 seconds
**2nd edit**
Nope..for some reason it keeps wanting to mine to the EU server, it isn't pulling my info from this command
zil_switcher.exe -m 0 zilminerteamred.bat -a zil1maff8t0qhsqyvl0rhh7np2w84tem3ngzcgu5ee -w stainedcrypto.570 -s stop.bat -e rvn-minermore-teamred.bat
everything operates correctly except that zilminerteamred.bat doesn't get started...it starts teamredminer and mines to the EU server but if I shut that down and launch the zilminerteamred.bat it uses the correct info and custom settings
February 04, 2021, 05:11:25 PM
I'm a little lost.
I'm mining with a small rig of 550 2gb Haven with Srbminer in criptonight with a run.bat
the tentative command line is:
zil_switcher .exe run.bat -a ziladdress
it report start/end option must not be empty
zil_switcher is located in the srbminer directory
do I have to point to a different ethash miner like phoenix for the etash part?
can you post an example with xmrig that is also supported but doesn't have ethash?
I'm mining with a small rig of 550 2gb Haven with Srbminer in criptonight with a run.bat
the tentative command line is:
zil_switcher .exe run.bat -a ziladdress
it report start/end option must not be empty
zil_switcher is located in the srbminer directory
do I have to point to a different ethash miner like phoenix for the etash part?
can you post an example with xmrig that is also supported but doesn't have ethash?
February 04, 2021, 09:50:08 AM
Just to clarify: the zilswitcher didn't ask for any pool, so, am I mining at shardpool.io ?
Yes, but if you are using Awesomeminer, you can mine on other pools, i made a description.
If you want mine etc+zil or eth(every coin with ethash)+zil than no switcher is needed. Maybe lollidieb update his miner for mining (example) beam+zil without switcher, because his miner can hold 2 pool connection at the same time, at the moment only for eth(every coin with ethash)+zil and etc+zil
February 04, 2021, 09:44:24 AM
Just to clarify: the zilswitcher didn't ask for any pool, so, am I mining at shardpool.io ?
February 03, 2021, 05:47:47 PM
Is it possible to do this kind of mining using a VPS?
Yes but i don't think it would be profitable.
Jump to: