Topic: [ANN][1000 SYNC] Proof of Stake now run by BLOCKCHAIN DEVELOPMENT COMPANY - page 446. (Read 816010 times)
May 23, 2014, 11:05:51 AM
wallet is not syncing, has there been an update since the original wallet for windows?
May 23, 2014, 11:05:10 AM
If this helps anyone, here's the config file I use to get 6.8 MHS out of 3 280x GPUs:
.\sgminer -k darkcoin -o stratum+tcp://stratum.multipoolmining.com:5555 -u my wallet address -p x --lookup-gap 2 --thread-concurrency 8192 -g 2 -I 13 --auto-fan --gpu-fan 0-85 --temp-cutoff 90 --temp-overheat 85 --temp-target 70 --gpu-memclock 1500 --gpu-engine 1180 --gpu-powertune +1
I played with many configs to come up with this one.
.\sgminer -k darkcoin -o stratum+tcp://stratum.multipoolmining.com:5555 -u my wallet address -p x --lookup-gap 2 --thread-concurrency 8192 -g 2 -I 13 --auto-fan --gpu-fan 0-85 --temp-cutoff 90 --temp-overheat 85 --temp-target 70 --gpu-memclock 1500 --gpu-engine 1180 --gpu-powertune +1
I played with many configs to come up with this one.
That is heavy overclocking or ? run it stable ?
yup heavy overclocking. it runs quite stable and i have low error rates on any of the pools I have used....compared to the Pool average. My temperatures are below 60 C on all 3 GPUs.
May 23, 2014, 11:02:14 AM
i run a single gigabyte r9 290 at ~2.4 mh/s but i have it underclocked and undervolted and it pulls 120watts off the wall.
That's not bad, but...
Evga gtx 750ti, 2.1 mh/s pulling 41 watts at the wall.
2.1? then why the f**k people buy r9 270 cards to run at 1.3 ?
could you please post your settings file?
May 23, 2014, 11:00:53 AM
If this helps anyone, here's the config file I use to get 6.8 MHS out of 3 280x GPUs:
.\sgminer -k darkcoin -o stratum+tcp://stratum.multipoolmining.com:5555 -u my wallet address -p x --lookup-gap 2 --thread-concurrency 8192 -g 2 -I 13 --auto-fan --gpu-fan 0-85 --temp-cutoff 90 --temp-overheat 85 --temp-target 70 --gpu-memclock 1500 --gpu-engine 1180 --gpu-powertune +1
I played with many configs to come up with this one.
.\sgminer -k darkcoin -o stratum+tcp://stratum.multipoolmining.com:5555 -u my wallet address -p x --lookup-gap 2 --thread-concurrency 8192 -g 2 -I 13 --auto-fan --gpu-fan 0-85 --temp-cutoff 90 --temp-overheat 85 --temp-target 70 --gpu-memclock 1500 --gpu-engine 1180 --gpu-powertune +1
I played with many configs to come up with this one.
I get the similar hash rate with 4 x 280x. But mine are Gigabyte and are notorious for hahsing less than other brands. I get 1.6 average each.
dude, check these settings https://docs.zoho.com/sheet/published.do?rid=12cbm2fe8ce55abb2476daa0f8c576b442d40&mode=html
and maybe you should check your drivers too before making any changes.
i run a single gigabyte r9 290 at ~2.4 mh/s but i have it underclocked and undervolted and it pulls 120watts off the wall, i find it the best ratio for now
290 are more powerful. Your hashrate is normal. Pulling 120W from the wall is probably because you are mining with x11. Scrypt will double that.
these are all settings for X11 mining, not scrypt
May 23, 2014, 10:56:27 AM
i run a single gigabyte r9 290 at ~2.4 mh/s but i have it underclocked and undervolted and it pulls 120watts off the wall.
That's not bad, but...
Evga gtx 750ti, 2.1 mh/s pulling 41 watts at the wall.
lol, i'm jelous, can you post your settings?
and voltage
May 23, 2014, 10:45:11 AM
If this helps anyone, here's the config file I use to get 6.8 MHS out of 3 280x GPUs:
.\sgminer -k darkcoin -o stratum+tcp://stratum.multipoolmining.com:5555 -u my wallet address -p x --lookup-gap 2 --thread-concurrency 8192 -g 2 -I 13 --auto-fan --gpu-fan 0-85 --temp-cutoff 90 --temp-overheat 85 --temp-target 70 --gpu-memclock 1500 --gpu-engine 1180 --gpu-powertune +1
I played with many configs to come up with this one.
.\sgminer -k darkcoin -o stratum+tcp://stratum.multipoolmining.com:5555 -u my wallet address -p x --lookup-gap 2 --thread-concurrency 8192 -g 2 -I 13 --auto-fan --gpu-fan 0-85 --temp-cutoff 90 --temp-overheat 85 --temp-target 70 --gpu-memclock 1500 --gpu-engine 1180 --gpu-powertune +1
I played with many configs to come up with this one.
I get the similar hash rate with 4 x 280x. But mine are Gigabyte and are notorious for hahsing less than other brands. I get 1.6 average each.
dude, check these settings https://docs.zoho.com/sheet/published.do?rid=12cbm2fe8ce55abb2476daa0f8c576b442d40&mode=html
and maybe you should check your drivers too before making any changes.
i run a single gigabyte r9 290 at ~2.4 mh/s but i have it underclocked and undervolted and it pulls 120watts off the wall, i find it the best ratio for now
290 are more powerful. Your hashrate is normal. Pulling 120W from the wall is probably because you are mining with x11. Scrypt will double that.
May 23, 2014, 10:44:34 AM
i run a single gigabyte r9 290 at ~2.4 mh/s but i have it underclocked and undervolted and it pulls 120watts off the wall.
That's not bad, but...
Evga gtx 750ti, 2.1 mh/s pulling 41 watts at the wall.
May 23, 2014, 10:41:23 AM
If this helps anyone, here's the config file I use to get 6.8 MHS out of 3 280x GPUs:
.\sgminer -k darkcoin -o stratum+tcp://stratum.multipoolmining.com:5555 -u my wallet address -p x --lookup-gap 2 --thread-concurrency 8192 -g 2 -I 13 --auto-fan --gpu-fan 0-85 --temp-cutoff 90 --temp-overheat 85 --temp-target 70 --gpu-memclock 1500 --gpu-engine 1180 --gpu-powertune +1
I played with many configs to come up with this one.
.\sgminer -k darkcoin -o stratum+tcp://stratum.multipoolmining.com:5555 -u my wallet address -p x --lookup-gap 2 --thread-concurrency 8192 -g 2 -I 13 --auto-fan --gpu-fan 0-85 --temp-cutoff 90 --temp-overheat 85 --temp-target 70 --gpu-memclock 1500 --gpu-engine 1180 --gpu-powertune +1
I played with many configs to come up with this one.
I get the similar hash rate with 4 x 280x. But mine are Gigabyte and are notorious for hahsing less than other brands. I get 1.6 average each.
Try this: thread-concurrency 8192 -I 13 --lookup-gap 2 --worksize 256 -g 2 --gpu-engine 1160 --gpu-memclock 1450
running 9.6 MH/s with 4x Sapphire r9 280x Vapor-x
Each card is different and engine/clock needs to be adjusted on a per card basis. Even among the 4 gigabyte that I have 2 behave differently and that is because they have different memory chips (Elpidia and Hynix). Saphhire are known to give good hash.
May 23, 2014, 10:40:38 AM
Couple of questions...
Staking begins at block 8200 now?
Why did the transition to staking fail the first time?
What has been done to fix this?
Staking begins at block 8200 now?
Why did the transition to staking fail the first time?
What has been done to fix this?
http://i.stack.imgur.com/9y9uk.gif
Half the people on here don't seem to understand why only a single GPU would be sufficient to finish up the remaining 1000 blocks. So obviously there is a decent amount of confusion going on. I think these are reasonable questions....
One of the selling points of this coin was that the launch went so smoothly. The average person should be able to understand what's going on and be able to make an informed decision about investing in or mining this coin.
May 23, 2014, 10:40:16 AM
and Transaction(s) volume
May 23, 2014, 10:36:58 AM
If this helps anyone, here's the config file I use to get 6.8 MHS out of 3 280x GPUs:
.\sgminer -k darkcoin -o stratum+tcp://stratum.multipoolmining.com:5555 -u my wallet address -p x --lookup-gap 2 --thread-concurrency 8192 -g 2 -I 13 --auto-fan --gpu-fan 0-85 --temp-cutoff 90 --temp-overheat 85 --temp-target 70 --gpu-memclock 1500 --gpu-engine 1180 --gpu-powertune +1
I played with many configs to come up with this one.
.\sgminer -k darkcoin -o stratum+tcp://stratum.multipoolmining.com:5555 -u my wallet address -p x --lookup-gap 2 --thread-concurrency 8192 -g 2 -I 13 --auto-fan --gpu-fan 0-85 --temp-cutoff 90 --temp-overheat 85 --temp-target 70 --gpu-memclock 1500 --gpu-engine 1180 --gpu-powertune +1
I played with many configs to come up with this one.
I get the similar hash rate with 4 x 280x. But mine are Gigabyte and are notorious for hahsing less than other brands. I get 1.6 average each.
dude, check these settings https://docs.zoho.com/sheet/published.do?rid=12cbm2fe8ce55abb2476daa0f8c576b442d40&mode=html
and maybe you should check your drivers too before making any changes.
i run a single gigabyte r9 290 at ~2.4 mh/s but i have it underclocked and undervolted and it pulls 120watts off the wall, i find it the best ratio for now
May 23, 2014, 10:35:29 AM
If this helps anyone, here's the config file I use to get 6.8 MHS out of 3 280x GPUs:
.\sgminer -k darkcoin -o stratum+tcp://stratum.multipoolmining.com:5555 -u my wallet address -p x --lookup-gap 2 --thread-concurrency 8192 -g 2 -I 13 --auto-fan --gpu-fan 0-85 --temp-cutoff 90 --temp-overheat 85 --temp-target 70 --gpu-memclock 1500 --gpu-engine 1180 --gpu-powertune +1
I played with many configs to come up with this one.
.\sgminer -k darkcoin -o stratum+tcp://stratum.multipoolmining.com:5555 -u my wallet address -p x --lookup-gap 2 --thread-concurrency 8192 -g 2 -I 13 --auto-fan --gpu-fan 0-85 --temp-cutoff 90 --temp-overheat 85 --temp-target 70 --gpu-memclock 1500 --gpu-engine 1180 --gpu-powertune +1
I played with many configs to come up with this one.
I get the similar hash rate with 4 x 280x. But mine are Gigabyte and are notorious for hahsing less than other brands. I get 1.6 average each.
Try this: thread-concurrency 8192 -I 13 --lookup-gap 2 --worksize 256 -g 2 --gpu-engine 1160 --gpu-memclock 1450
running 9.6 MH/s with 4x Sapphire r9 280x Vapor-x
Can you not use 4 threads on 280x?
I see improvements both for 270x and 290x by using 4 threads
May 23, 2014, 10:35:20 AM
May 23, 2014, 10:33:26 AM
And stop mining @Hashhot people, they are on the old chain!
they simply ban your worker after a few minutes anyway.
There's no need to mine this anyway now as difficulty is down to a controllable level.
If anyone is still necessary to generate heartbeats, it should be only one or two GPU's and they should be gradually tuned down.
OK thx. pointing my worker back at the multipool.
Let us know if you need more of us working on the extra 1000 POW blocks to get that solved. I will come back to help out as it's in all of our best interests.
getting a reward for keeping the chain alive would be nice.... getting through 1k blocks with 0 rewards dont really inspire a great deal of miners to actually help.
..they don't have to. The acute emergency situation is over and if people pull out ASAP, the difficulty will very soon be manageable with one single cpu-miner. So stop mining thin air and come back to Darkcoin or whatever gives the highest profit now.
x11 (XC) ...
hope our multipool is mining it
Thanks, I changed to it immediately. Mining with rejectmining.com . It's p2pool, 1%fee including tranfer to wallet, and better than any multipool ever can be.
Better mobilize some BTC to defend SYNC agains the hyenas the next few days
May 23, 2014, 10:33:13 AM
If this helps anyone, here's the config file I use to get 6.8 MHS out of 3 280x GPUs:
.\sgminer -k darkcoin -o stratum+tcp://stratum.multipoolmining.com:5555 -u my wallet address -p x --lookup-gap 2 --thread-concurrency 8192 -g 2 -I 13 --auto-fan --gpu-fan 0-85 --temp-cutoff 90 --temp-overheat 85 --temp-target 70 --gpu-memclock 1500 --gpu-engine 1180 --gpu-powertune +1
I played with many configs to come up with this one.
.\sgminer -k darkcoin -o stratum+tcp://stratum.multipoolmining.com:5555 -u my wallet address -p x --lookup-gap 2 --thread-concurrency 8192 -g 2 -I 13 --auto-fan --gpu-fan 0-85 --temp-cutoff 90 --temp-overheat 85 --temp-target 70 --gpu-memclock 1500 --gpu-engine 1180 --gpu-powertune +1
I played with many configs to come up with this one.
I get the similar hash rate with 4 x 280x. But mine are Gigabyte and are notorious for hahsing less than other brands. I get 1.6 average each.
Try this: thread-concurrency 8192 -I 13 --lookup-gap 2 --worksize 256 -g 2 --gpu-engine 1160 --gpu-memclock 1450
running 9.6 MH/s with 4x Sapphire r9 280x Vapor-x
May 23, 2014, 10:28:12 AM
Couple of questions...
Staking begins at block 8200 now?
Why did the transition to staking fail the first time?
What has been done to fix this?
Staking begins at block 8200 now?
Why did the transition to staking fail the first time?
What has been done to fix this?
May 23, 2014, 10:27:48 AM
"STRATUMS HAVE BEEN PUT BACK UP. THE DEVELOPERS ADDED ANOTHER 1000 BLOCKS OF POW MINING BEFORE THE END."
This is from http://sync.suchpool.pw/
This is from http://sync.suchpool.pw/
May 23, 2014, 10:27:27 AM
Wallet says not staking because no mature coins, but isnt it supposed to be only 50 blocks for maturity?
May 23, 2014, 10:27:03 AM
If this helps anyone, here's the config file I use to get 6.8 MHS out of 3 280x GPUs:
.\sgminer -k darkcoin -o stratum+tcp://stratum.multipoolmining.com:5555 -u my wallet address -p x --lookup-gap 2 --thread-concurrency 8192 -g 2 -I 13 --auto-fan --gpu-fan 0-85 --temp-cutoff 90 --temp-overheat 85 --temp-target 70 --gpu-memclock 1500 --gpu-engine 1180 --gpu-powertune +1
I played with many configs to come up with this one.
.\sgminer -k darkcoin -o stratum+tcp://stratum.multipoolmining.com:5555 -u my wallet address -p x --lookup-gap 2 --thread-concurrency 8192 -g 2 -I 13 --auto-fan --gpu-fan 0-85 --temp-cutoff 90 --temp-overheat 85 --temp-target 70 --gpu-memclock 1500 --gpu-engine 1180 --gpu-powertune +1
I played with many configs to come up with this one.
I get the similar hash rate with 4 x 280x. But mine are Gigabyte and are notorious for hahsing less than other brands. I get 1.6 average each.
May 23, 2014, 10:26:21 AM
Couple of questions...
Staking begins at block 8200 now?
Why did the transition to staking fail the first time?
What has been done to fix this?
Staking begins at block 8200 now?
Why did the transition to staking fail the first time?
What has been done to fix this?
i had a look on our richlist.
It seems that the Person (without Exchange and pools) have 23 Sync
the next real persons have 10 - 13 Sync.
That Looks like a fair Distribution, good Job everyone and especially mscolleg and lolfish
Jump to: