Topic: [ANN][APT] Aptcoin★ASIC Resistant Scrypt In-Motion(NM) w/Aptcurve Retargeting - page 15. (Read 56746 times)
August 29, 2014, 03:34:28 PM
Can somebody be so kind and share the miner? thanks in advance.
August 29, 2014, 01:31:25 PM
i try to setup CPU miner i but fail 
I had trouble too but it was my first attempt at compiling a miner in windows.
Someone posted earlier that had compiled a working windows cpuminer and would share it if sent a PM (that's where I got mine
).I'm using a jury-rigged gpuminer. It's a little faulty though, but at least it works.
Have you found any blocks with it?
How are you dealing with the changing NFactor and what hash rate are you getting with the different NFactors?
I have tried several times to compile a modified version of vertminer but I keep getting lots of "share above target" and rejects.
Mind sharing what you have?
I've found around ~30 blocks so far.
I set it to fetch the n-factor from the network in a very crude way, so it actually has to restart the miner everytime it changes (thus the word "jury-rigged"). I'm getting around 60kh/s at n-factor 13 and it almost doubles in speed everytime it goes a factor down (R9 290).
Hey, it works. At least you will help get us over those NFactor 13 blocks that we were stuck on before.
Sent you a PM.
August 29, 2014, 12:50:18 PM
i try to setup CPU miner i but fail
I had trouble too but it was my first attempt at compiling a miner in windows.
Someone posted earlier that had compiled a working windows cpuminer and would share it if sent a PM (that's where I got mine
).I'm using a jury-rigged gpuminer. It's a little faulty though, but at least it works.
Have you found any blocks with it?
How are you dealing with the changing NFactor and what hash rate are you getting with the different NFactors?
I have tried several times to compile a modified version of vertminer but I keep getting lots of "share above target" and rejects.
Mind sharing what you have?
I've found around ~30 blocks so far.
I set it to fetch the n-factor from the network in a very crude way, so it actually has to restart the miner everytime it changes (thus the word "jury-rigged"). I'm getting around 60kh/s at n-factor 13 and it almost doubles in speed everytime it goes a factor down (R9 290).
August 29, 2014, 12:17:27 PM
i try to setup CPU miner i but fail
I had trouble too but it was my first attempt at compiling a miner in windows.
Someone posted earlier that had compiled a working windows cpuminer and would share it if sent a PM (that's where I got mine
).I'm using a jury-rigged gpuminer. It's a little faulty though, but at least it works.
Have you found any blocks with it?
How are you dealing with the changing NFactor and what hash rate are you getting with the different NFactors?
I have tried several times to compile a modified version of vertminer but I keep getting lots of "share above target" and rejects.
Mind sharing what you have?
August 29, 2014, 12:00:41 PM
i try to setup CPU miner i but fail
I had trouble too but it was my first attempt at compiling a miner in windows.
Someone posted earlier that had compiled a working windows cpuminer and would share it if sent a PM (that's where I got mine
).I'm using a jury-rigged gpuminer. It's a little faulty though, but at least it works.
August 29, 2014, 11:09:33 AM
i try to setup CPU miner i but fail
I had trouble too but it was my first attempt at compiling a miner in windows.
Someone posted earlier that had compiled a working windows cpuminer and would share it if sent a PM (that's where I got mine
). August 29, 2014, 10:46:56 AM
i try to setup CPU miner i but fail
August 29, 2014, 10:06:18 AM
xD how long will it take to get 1 block? 
anybody? how many blocks you found? 
anybody? how many blocks you found? I've found 16 blocks over the last 3 days
I found 10 in 3 days with most of them found late at night or early in the morning.
I didn't find any blocks until I started using the cpuminer.
August 29, 2014, 09:49:40 AM
xD how long will it take to get 1 block? anybody? how many blocks you found?
anybody? how many blocks you found? I've found 16 blocks over the last 3 days
August 29, 2014, 08:54:45 AM
xD how long will it take to get 1 block? anybody? how many blocks you found?
anybody? how many blocks you found? 
August 29, 2014, 05:21:41 AM
interesting one but definitely need exchange.
August 29, 2014, 03:20:59 AM
this coin has literally no value until it hits an exchange - please make that happen
August 27, 2014, 03:58:39 PM
Finding blocks again such happy!!!!!!!!!
such happy!!!!!!!!! August 27, 2014, 08:11:47 AM
The default client does not consider them confirmed until 120 confirmations. That's different than the network/protocol limit of 100.
Code:
"account" : "",
"address" : "AXjeZskVxRgPFSfGqRsMZvmfHsBi3Vjew9",
"category" : "generate",
"amount" : 42.00000000,
"confirmations" : 120,
"generated" : true,
"blockhash" : "bfc6b881c078512e4c1ad2cb4d5e30f1e234c600fa1995aefcdb37cf2b352945",
"blockindex" : 0,
"blocktime" : 1409076489,
"txid" : "c6ad4ebd4c71bed8ed2020e7b4e3627618e04af399f6ef45585ccfe90f1ebb10",
"normtxid" : "f0abed1793d24198c72817505547f0dabe88c0d8015abe4995e029e9811afd0c",
"time" : 1409076489,
"timereceived" : 1409076492
August 26, 2014, 03:46:43 PM
The question that anyone who's been watching has is: What's up with the block generation times?
In short, it's off. But we're in the process of testing a change that should help fix this by changing how we re-target difficulty. The good news is that we hope to see more stable block generation times. The bad news is that it's not only experimental, but it's also going to require a mandatory update to all wallets.
Since there are no pools or exchanges yet, it's up to YOU to update when the new wallet is released.
Thank you to everyone who has supported us thus far, we'll continue innovating to make sure this coin reaches the moon.
In short, it's off. But we're in the process of testing a change that should help fix this by changing how we re-target difficulty. The good news is that we hope to see more stable block generation times. The bad news is that it's not only experimental, but it's also going to require a mandatory update to all wallets.
Since there are no pools or exchanges yet, it's up to YOU to update when the new wallet is released.
Thank you to everyone who has supported us thus far, we'll continue innovating to make sure this coin reaches the moon.
August 26, 2014, 10:09:26 AM
Dev after how much confirmations immature is confirmed ? 
{
"account" : "",
"address" : "AXPEEnA9WLamNzarxVMhHfGfzWB4v7Ad2w",
"category" : "immature",
"amount" : 42.00000000,
"confirmations" : 36,
"generated" : true,
"blockhash" : "f1d644f887e4c2b245a67206f264439b37968586d668da09902aae4a50623495",
"blockindex" : 0,
"blocktime" : 1408718115,
"txid" : "774f633b75b7071fdbd5385f7fdcf6ad103e7a5531e61d59998c7dfe26cd2afd",
"normtxid" : "aa3fb1a5c6c3c620ffa2d28e80ee2765d1275af8eae9cb43427912cc0aaf478f",
"time" : 1408718115,
"timereceived" : 1408718375
}
Also about mining i am mining at port 30200 with that config:
rpcuser=root
rpcpassword=password
addnode=199.127.225.232
addnode=199.127.225.195
addnode=199.127.225.191
addnode=199.127.225.164
addnode=50.7.47.93
rpcallowip=192.168.1.*
rpcthreads=10
rpcport=30200
server=1
daemon=1
{
"account" : "",
"address" : "AXPEEnA9WLamNzarxVMhHfGfzWB4v7Ad2w",
"category" : "immature",
"amount" : 42.00000000,
"confirmations" : 36,
"generated" : true,
"blockhash" : "f1d644f887e4c2b245a67206f264439b37968586d668da09902aae4a50623495",
"blockindex" : 0,
"blocktime" : 1408718115,
"txid" : "774f633b75b7071fdbd5385f7fdcf6ad103e7a5531e61d59998c7dfe26cd2afd",
"normtxid" : "aa3fb1a5c6c3c620ffa2d28e80ee2765d1275af8eae9cb43427912cc0aaf478f",
"time" : 1408718115,
"timereceived" : 1408718375
}
Also about mining i am mining at port 30200 with that config:
rpcuser=root
rpcpassword=password
addnode=199.127.225.232
addnode=199.127.225.195
addnode=199.127.225.191
addnode=199.127.225.164
addnode=50.7.47.93
rpcallowip=192.168.1.*
rpcthreads=10
rpcport=30200
server=1
daemon=1
Coinbase Maturity (i.e. blocks that are mined) change status after 100 confirmations (same as bitcoin/litecoin).
You can mine on any port you want by specifying, but that's non-standard. 12946 is the default port.
{
"account" : "",
"address" : "AXPEEnA9WLamNzarxVMhHfGfzWB4v7Ad2w",
"category" : "immature",
"amount" : 42.00000000,
"confirmations" : 110,
"generated" : true,
"blockhash" : "f1d644f887e4c2b245a67206f264439b37968586d668da09902aae4a50623495",
"blockindex" : 0,
"blocktime" : 1408718115,
"txid" : "774f633b75b7071fdbd5385f7fdcf6ad103e7a5531e61d59998c7dfe26cd2afd",
"normtxid" : "aa3fb1a5c6c3c620ffa2d28e80ee2765d1275af8eae9cb43427912cc0aaf478f",
"time" : 1408718115,
"timereceived" : 1408718375
}
And ?
Why they are not confirmed yet ? The default client does not consider them confirmed until 120 confirmations. That's different than the network/protocol limit of 100.
August 26, 2014, 08:38:09 AM
Dev after how much confirmations immature is confirmed ?
{
"account" : "",
"address" : "AXPEEnA9WLamNzarxVMhHfGfzWB4v7Ad2w",
"category" : "immature",
"amount" : 42.00000000,
"confirmations" : 36,
"generated" : true,
"blockhash" : "f1d644f887e4c2b245a67206f264439b37968586d668da09902aae4a50623495",
"blockindex" : 0,
"blocktime" : 1408718115,
"txid" : "774f633b75b7071fdbd5385f7fdcf6ad103e7a5531e61d59998c7dfe26cd2afd",
"normtxid" : "aa3fb1a5c6c3c620ffa2d28e80ee2765d1275af8eae9cb43427912cc0aaf478f",
"time" : 1408718115,
"timereceived" : 1408718375
}
Also about mining i am mining at port 30200 with that config:
rpcuser=root
rpcpassword=password
addnode=199.127.225.232
addnode=199.127.225.195
addnode=199.127.225.191
addnode=199.127.225.164
addnode=50.7.47.93
rpcallowip=192.168.1.*
rpcthreads=10
rpcport=30200
server=1
daemon=1
{
"account" : "",
"address" : "AXPEEnA9WLamNzarxVMhHfGfzWB4v7Ad2w",
"category" : "immature",
"amount" : 42.00000000,
"confirmations" : 36,
"generated" : true,
"blockhash" : "f1d644f887e4c2b245a67206f264439b37968586d668da09902aae4a50623495",
"blockindex" : 0,
"blocktime" : 1408718115,
"txid" : "774f633b75b7071fdbd5385f7fdcf6ad103e7a5531e61d59998c7dfe26cd2afd",
"normtxid" : "aa3fb1a5c6c3c620ffa2d28e80ee2765d1275af8eae9cb43427912cc0aaf478f",
"time" : 1408718115,
"timereceived" : 1408718375
}
Also about mining i am mining at port 30200 with that config:
rpcuser=root
rpcpassword=password
addnode=199.127.225.232
addnode=199.127.225.195
addnode=199.127.225.191
addnode=199.127.225.164
addnode=50.7.47.93
rpcallowip=192.168.1.*
rpcthreads=10
rpcport=30200
server=1
daemon=1
Coinbase Maturity (i.e. blocks that are mined) change status after 100 confirmations (same as bitcoin/litecoin).
You can mine on any port you want by specifying, but that's non-standard. 12946 is the default port.
{
"account" : "",
"address" : "AXPEEnA9WLamNzarxVMhHfGfzWB4v7Ad2w",
"category" : "immature",
"amount" : 42.00000000,
"confirmations" : 110,
"generated" : true,
"blockhash" : "f1d644f887e4c2b245a67206f264439b37968586d668da09902aae4a50623495",
"blockindex" : 0,
"blocktime" : 1408718115,
"txid" : "774f633b75b7071fdbd5385f7fdcf6ad103e7a5531e61d59998c7dfe26cd2afd",
"normtxid" : "aa3fb1a5c6c3c620ffa2d28e80ee2765d1275af8eae9cb43427912cc0aaf478f",
"time" : 1408718115,
"timereceived" : 1408718375
}
And ?
Why they are not confirmed yet ? August 26, 2014, 03:34:03 AM
Has anyone compiled the aptcoin cpuminer for windows?
I have but wont release the download address publicly. Send me a PM if you want. 
August 25, 2014, 01:11:07 PM
very easy to do mining
when it will be released in exchange
when it will be released in exchange
August 25, 2014, 12:08:14 PM
Has anyone compiled the aptcoin cpuminer for windows?
Jump to: