Topic: [ANN][ARG] Argentum || A New Begining || UPDATE YOUR WALLET || - page 25. (Read 59759 times)
Any working exchange? Cryptopia has nothing.
Best bet would have been for you to fork from Unitus and swap out the algorithms.
Ahmed
Ahmed
It seems that Unitus & now XMY are suffering from the same issue regarding merge mining:
https://bitcointalksearch.org/topic/m.15638371
So that's NMC, SYS, ARG, UNITUS & XMY that are now broken with merge mining since they updated their code....what's the story? If every merge mined coin updated their code this way - there would be no merged mined coins to merge mine!
We have a version in testing right now. Thanks for pointing this out.
Best bet would have been for you to fork from Unitus and swap out the algorithms.
Ahmed
Ahmed
It seems that Unitus & now XMY are suffering from the same issue regarding merge mining:
https://bitcointalksearch.org/topic/m.15638371
So that's NMC, SYS, ARG, UNITUS & XMY that are now broken with merge mining since they updated their code....what's the story? If every merge mined coin updated their code this way - there would be no merged mined coins to merge mine!
We'll get it fixed, I can assure you that. Will it be fixed in 2 hours, or 2 days, I can't be certain. I haven't had any reports of Scrypt auxpow not working. Once the multialgo difficulty adjustment gets fixed, I'd image aux sha will be straightened out as a result. We'll get it right.
OK, but I don't see much going on in the git repo. I'm going to remove it to make way for a different merge mined coin - I hope you get the problems fixed - but it does seem to be a very slow process.
Good luck
Nice to know when youve been asked for a quote to do a job and someone else did it cheaper and made a mess of it. And now your advice is whats needed to fix a problem which shouldnt have occoured in the first place.
Ahmed
Ahmed
Best bet would have been for you to fork from Unitus and swap out the algorithms.
Ahmed
Ahmed
Looks like they've taken your advice.....
Best bet would have been for you to fork from Unitus and swap out the algorithms.
Ahmed
Ahmed
We've passed the switchover block 1840000 but it looks like nothing has changed - sha256 diff is still almost zero & all my blocks are still being rejected..... 
Our Dev is on it
You are merge mining sha right? Can you post part of your log?
Sure, & yes I am:
Code:
2016-07-16 14:27:20 CreateNewBlock(): total size 1000
2016-07-16 14:27:59 connect() to 192.168.1.50:13580 failed after select(): No route to host (113)
2016-07-16 14:28:02 connect() to 98.115.147.74:13580 failed after select(): Connection refused (111)
2016-07-16 14:28:55 connect() to 107.7.28.130:13580 failed after select(): Connection refused (111)
2016-07-16 14:28:55 ERROR: AUX POW parent hash d7fdf85b2c15e65ba7e5a1262dad76d4872eea5f275f0f70c8d6ebabf634b861 is not under target 000000000000d2df000000000000000000000000000000000000000000000000
2016-07-16 14:28:58 ERROR: AUX POW parent hash 9af150c746a7662de348cf2c03782938d7ac515eff6d036a6970d2d2954f1859 is not under target 000000000000d2df000000000000000000000000000000000000000000000000
2016-07-16 14:29:17 UpdateTip: new best=00000000000091b52e32430afd7e51033d57b03340365374dbc7e5b61b31746d height=1840154 log2_work=60.994844 tx=2043171 date=2016-07-16 14:28:14 progress=1.000000
2016-07-16 14:29:17 ProcessBlock: ACCEPTED
2016-07-16 14:29:18 CreateNewBlock(): total size 1000
2016-07-16 14:29:19 UpdateTip: new best=00000000000047382b1426d1a80c13c7243ee15f05d83358978e98250c44535f height=1840155 log2_work=60.995072 tx=2043172 date=2016-07-16 14:29:56 progress=1.000000
2016-07-16 14:29:19 ProcessBlock: ACCEPTED
2016-07-16 14:29:19 CreateNewBlock(): total size 1000
2016-07-16 14:29:27 keypool reserve 2
2016-07-16 14:29:27 keypool return 2
2016-07-16 14:29:39 ERROR: AUX POW parent hash 6c099e7aa05a22f753750cda8f46b73132152516a0d6981e1deaaf31d509b664 is not under target 000000000000d44f000000000000000000000000000000000000000000000000
2016-07-16 14:29:47 UpdateTip: new best=0000000000000a3a9c6f2429acca37566353bc123d82b7e4ac3ba1b9ef5076cd height=1840156 log2_work=60.995285 tx=2043173 date=2016-07-16 14:29:19 progress=1.000000
2016-07-16 14:29:47 ProcessBlock: ACCEPTED
2016-07-16 14:29:47 CreateNewBlock(): total size 1000
2016-07-16 14:30:06 connect() to 192.168.1.50:13580 failed after select(): No route to host (113)
2016-07-16 14:30:08 connect() to 98.115.147.74:13580 failed after select(): Connection refused (111)
2016-07-16 14:30:08 connect() to 62.210.149.29:13580 failed after select(): Connection refused (111)
2016-07-16 14:30:15 connect() to 95.158.16.192:13580 failed after select(): No route to host (113)
Using latest from git on Xubuntu 64bit - hope it helps.
We've passed the switchover block 1840000 but it looks like nothing has changed - sha256 diff is still almost zero & all my blocks are still being rejected.....
Our Dev is on it
You are merge mining sha right? Can you post part of your log?
We've passed the switchover block 1840000 but it looks like nothing has changed - sha256 diff is still almost zero & all my blocks are still being rejected.....
Still have a few people on old versions. Be sure to update
https://github.com/Cryptcollector/ARG2.0/
https://github.com/Cryptcollector/ARG2.0/releases/tag/2.2
https://github.com/Cryptcollector/ARG2.0/
https://github.com/Cryptcollector/ARG2.0/releases/tag/2.2
Updating Argentum to 2.0 was a massive upgrade as we were on an ancient code base. We are now up to date with Dogecoin v10 code-base. We'll continue to go through the code to make minor tweaks and changes and ensure everything is as it should be. The community is welcome to contribute as well.
Cryptcollector will update the OP as soon as he is able.
Cryptcollector will update the OP as soon as he is able.
Something is very wrong with Difficulty and Network speed is showing 7 times higher than LTC 
Coin Algo Difficulty Net Mhash/s
ARG scrypt 91,007.1782 8,062,344.520

{
"version" : 2020000,
"protocolversion" : 1040000,
"walletversion" : 60000,
"balance" : 0.00000000,
"blocks" : 1838281,
"timeoffset" : 0,
"connections" : 2,
"proxy" : "",
"pow_algo_id" : 1,
"pow_algo" : "scrypt",
"difficulty" : 84702.04236185,
"difficulty_sha256" : 0.00024414,
"testnet" : false,
"keypoololdest" : 1467564297,
"keypoolsize" : 101,
"paytxfee" : 0.00000000,
"relayfee" : 0.00500000,
"errors" : ""
}
Coin Algo Difficulty Net Mhash/s
ARG scrypt 91,007.1782 8,062,344.520

{
"version" : 2020000,
"protocolversion" : 1040000,
"walletversion" : 60000,
"balance" : 0.00000000,
"blocks" : 1838281,
"timeoffset" : 0,
"connections" : 2,
"proxy" : "",
"pow_algo_id" : 1,
"pow_algo" : "scrypt",
"difficulty" : 84702.04236185,
"difficulty_sha256" : 0.00024414,
"testnet" : false,
"keypoololdest" : 1467564297,
"keypoolsize" : 101,
"paytxfee" : 0.00000000,
"relayfee" : 0.00500000,
"errors" : ""
}
Correct difficulty adjustment will kick in at block 1,840,000
You should change the link on the first post. What is new in v2.2 compared to v2.0?
https://github.com/Cryptcollector/ARG2.0/commit/b6a2e11410e6a38ccf99969edf84803707ddca07
"version" : 2020000,
"protocolversion" : 1040000,
"walletversion" : 60000,
"balance" : 0.00000000,
"blocks" : 1838346,
"timeoffset" : -151,
"connections" : 5,
"proxy" : "",
"pow_algo_id" : 2,
"pow_algo" : "sha256d",
"difficulty" : 0.00024414,
"difficulty_sha256" : 0.00024414,
"testnet" : false,
"keypoololdest" : 1467209529,
"keypoolsize" : 100,
"unlocked_until" : 0,
"paytxfee" : 0.00000000,
"relayfee" : 0.00500000,
"errors" : ""
Hmmm.....
"protocolversion" : 1040000,
"walletversion" : 60000,
"balance" : 0.00000000,
"blocks" : 1838346,
"timeoffset" : -151,
"connections" : 5,
"proxy" : "",
"pow_algo_id" : 2,
"pow_algo" : "sha256d",
"difficulty" : 0.00024414,
"difficulty_sha256" : 0.00024414,
"testnet" : false,
"keypoololdest" : 1467209529,
"keypoolsize" : 100,
"unlocked_until" : 0,
"paytxfee" : 0.00000000,
"relayfee" : 0.00500000,
"errors" : ""
Hmmm.....
Something is very wrong with Difficulty and Network speed is showing 7 times higher than LTC
Coin Algo Difficulty Net Mhash/s
ARG scrypt 91,007.1782 8,062,344.520

{
"version" : 2020000,
"protocolversion" : 1040000,
"walletversion" : 60000,
"balance" : 0.00000000,
"blocks" : 1838281,
"timeoffset" : 0,
"connections" : 2,
"proxy" : "",
"pow_algo_id" : 1,
"pow_algo" : "scrypt",
"difficulty" : 84702.04236185,
"difficulty_sha256" : 0.00024414,
"testnet" : false,
"keypoololdest" : 1467564297,
"keypoolsize" : 101,
"paytxfee" : 0.00000000,
"relayfee" : 0.00500000,
"errors" : ""
}
Coin Algo Difficulty Net Mhash/s
ARG scrypt 91,007.1782 8,062,344.520

{
"version" : 2020000,
"protocolversion" : 1040000,
"walletversion" : 60000,
"balance" : 0.00000000,
"blocks" : 1838281,
"timeoffset" : 0,
"connections" : 2,
"proxy" : "",
"pow_algo_id" : 1,
"pow_algo" : "scrypt",
"difficulty" : 84702.04236185,
"difficulty_sha256" : 0.00024414,
"testnet" : false,
"keypoololdest" : 1467564297,
"keypoolsize" : 101,
"paytxfee" : 0.00000000,
"relayfee" : 0.00500000,
"errors" : ""
}
You should change the link on the first post. What is new in v2.2 compared to v2.0?
Jump to: