Topic: [ANN][AUTO-SWITCH] Profit-switch auto-exchange pool: CleverMining.com - page 36. (Read 554401 times)
November 17, 2014, 05:45:13 AM
Are you using a SHA-256 miner on a Scrypt pool?
November 15, 2014, 12:32:41 PM
Ok, thanks for the info man! =)
One little more question that maybe u can help out with
P2Pools, Ive understand that i can host a p2pool myself on my comp/server, does it mean i got my "own" pool?, will i recieve the whole 25 BTC myself if i would find a Block? if im the only one mining at my p2pool ofc, isnt it like kinda solo mining?
One little more question that maybe u can help out with
P2Pools, Ive understand that i can host a p2pool myself on my comp/server, does it mean i got my "own" pool?, will i recieve the whole 25 BTC myself if i would find a Block? if im the only one mining at my p2pool ofc, isnt it like kinda solo mining?
Yes, you can host your own P2Pool node. No, it's not solo mining, you are still contributing to a pool together with other nodes. P2Pool has certain technical advantages: no single point of failure, potentially better latencies etc. Also the ideological benefit of decentralization.
November 15, 2014, 11:00:13 AM
Heya guys!
New in the area but love to hear the FAN going for full speed, BUT i got a problem, i got an Antminer S1 (To start things with, other S3 is on its way )
But i cant use it on clevermining the bot, when i check status the diff is around 1k, and it says and i quote
"Our new stratum server has VARDIFF enabled and it should work great for most users. But if you have a miner with dozens of chips working as a single connection you might want to setup your own difficulty. You can do this by using password d=XXXX where XXXX is number between 128 and 65536 (only powers of 2 are accepted, so 128, 256, 512, etc, e.g. d=512). This will set a fixed difficulty and disable vardiff. It works per connection so you can choose separate difficulty for each of your miners."
Ive tried d=256 so many times, but it still is on ~1k diff :/, and my antminer wont any "accepted", only alot of Rejected & Discarded
Got latest firmware for the S1, someone knows the soloution for my noobiness? (Ive tried to find some post helping me out but hey ... its not one page
Hope someone got a lovely fridy, not like mine, carproblems, walked over 2 hours, finally home!
New in the area but love to hear the FAN going for full speed
, BUT i got a problem, i got an Antminer S1 (To start things with, other S3 is on its way ) But i cant use it on clevermining the bot, when i check status the diff is around 1k, and it says and i quote
"Our new stratum server has VARDIFF enabled and it should work great for most users. But if you have a miner with dozens of chips working as a single connection you might want to setup your own difficulty. You can do this by using password d=XXXX where XXXX is number between 128 and 65536 (only powers of 2 are accepted, so 128, 256, 512, etc, e.g. d=512). This will set a fixed difficulty and disable vardiff. It works per connection so you can choose separate difficulty for each of your miners."
Ive tried d=256 so many times, but it still is on ~1k diff :/, and my antminer wont any "accepted", only alot of Rejected & Discarded
Got latest firmware for the S1, someone knows the soloution for my noobiness? (Ive tried to find some post helping me out but hey ... its not one page
Hope someone got a lovely fridy, not like mine, carproblems, walked over 2 hours, finally home!
Sorry about your car, can't help with that but can help with the ants:
This is not a SHA256 pool, it uses a different algorithm (Scrypt). Your miner won't work here. Use Eligius, bitcoin.cz, or find a p2pool node near you.
Uhhhhhhhh that sucks
, what kinda machine do i need that support scrypt?, wich is the best "pay-out" pools this days?, ive checked Eligus but seems hard to earn something , and gotta check out p2pool :-)Thank for the help!
Regards
And yes cars sucks, litterally
All bitcoin pools will pay roughly the same, since it's all the same coin. Ant S1 is only barely profitable if your power cost is below 0.1 USD per kWh.
For Scrypt there isn't really much of a choice in hardware. You can probably pick up some cheap used Gridseed blades or something like that. Don't expect much income though. Good a space heater and/or hobby.
Ok, thanks for the info man! =)
One little more question that maybe u can help out with
P2Pools, Ive understand that i can host a p2pool myself on my comp/server, does it mean i got my "own" pool?, will i recieve the whole 25 BTC myself if i would find a Block? if im the only one mining at my p2pool ofc, isnt it like kinda solo mining?
November 14, 2014, 09:34:59 PM
Heya guys!
New in the area but love to hear the FAN going for full speed, BUT i got a problem, i got an Antminer S1 (To start things with, other S3 is on its way )
But i cant use it on clevermining the bot, when i check status the diff is around 1k, and it says and i quote
"Our new stratum server has VARDIFF enabled and it should work great for most users. But if you have a miner with dozens of chips working as a single connection you might want to setup your own difficulty. You can do this by using password d=XXXX where XXXX is number between 128 and 65536 (only powers of 2 are accepted, so 128, 256, 512, etc, e.g. d=512). This will set a fixed difficulty and disable vardiff. It works per connection so you can choose separate difficulty for each of your miners."
Ive tried d=256 so many times, but it still is on ~1k diff :/, and my antminer wont any "accepted", only alot of Rejected & Discarded
Got latest firmware for the S1, someone knows the soloution for my noobiness? (Ive tried to find some post helping me out but hey ... its not one page
Hope someone got a lovely fridy, not like mine, carproblems, walked over 2 hours, finally home!
New in the area but love to hear the FAN going for full speed
, BUT i got a problem, i got an Antminer S1 (To start things with, other S3 is on its way ) But i cant use it on clevermining the bot, when i check status the diff is around 1k, and it says and i quote
"Our new stratum server has VARDIFF enabled and it should work great for most users. But if you have a miner with dozens of chips working as a single connection you might want to setup your own difficulty. You can do this by using password d=XXXX where XXXX is number between 128 and 65536 (only powers of 2 are accepted, so 128, 256, 512, etc, e.g. d=512). This will set a fixed difficulty and disable vardiff. It works per connection so you can choose separate difficulty for each of your miners."
Ive tried d=256 so many times, but it still is on ~1k diff :/, and my antminer wont any "accepted", only alot of Rejected & Discarded
Got latest firmware for the S1, someone knows the soloution for my noobiness? (Ive tried to find some post helping me out but hey ... its not one page
Hope someone got a lovely fridy, not like mine, carproblems, walked over 2 hours, finally home!
Sorry about your car, can't help with that but can help with the ants:
This is not a SHA256 pool, it uses a different algorithm (Scrypt). Your miner won't work here. Use Eligius, bitcoin.cz, or find a p2pool node near you.
Uhhhhhhhh that sucks
, what kinda machine do i need that support scrypt?, wich is the best "pay-out" pools this days?, ive checked Eligus but seems hard to earn something , and gotta check out p2pool :-)Thank for the help!
Regards
And yes cars sucks, litterally
All bitcoin pools will pay roughly the same, since it's all the same coin. Ant S1 is only barely profitable if your power cost is below 0.1 USD per kWh.
For Scrypt there isn't really much of a choice in hardware. You can probably pick up some cheap used Gridseed blades or something like that. Don't expect much income though. Good as a space heater and/or hobby.
November 14, 2014, 08:48:10 PM
Heya guys!
New in the area but love to hear the FAN going for full speed, BUT i got a problem, i got an Antminer S1 (To start things with, other S3 is on its way )
But i cant use it on clevermining the bot, when i check status the diff is around 1k, and it says and i quote
"Our new stratum server has VARDIFF enabled and it should work great for most users. But if you have a miner with dozens of chips working as a single connection you might want to setup your own difficulty. You can do this by using password d=XXXX where XXXX is number between 128 and 65536 (only powers of 2 are accepted, so 128, 256, 512, etc, e.g. d=512). This will set a fixed difficulty and disable vardiff. It works per connection so you can choose separate difficulty for each of your miners."
Ive tried d=256 so many times, but it still is on ~1k diff :/, and my antminer wont any "accepted", only alot of Rejected & Discarded
Got latest firmware for the S1, someone knows the soloution for my noobiness? (Ive tried to find some post helping me out but hey ... its not one page
Hope someone got a lovely fridy, not like mine, carproblems, walked over 2 hours, finally home!
New in the area but love to hear the FAN going for full speed
, BUT i got a problem, i got an Antminer S1 (To start things with, other S3 is on its way ) But i cant use it on clevermining the bot, when i check status the diff is around 1k, and it says and i quote
"Our new stratum server has VARDIFF enabled and it should work great for most users. But if you have a miner with dozens of chips working as a single connection you might want to setup your own difficulty. You can do this by using password d=XXXX where XXXX is number between 128 and 65536 (only powers of 2 are accepted, so 128, 256, 512, etc, e.g. d=512). This will set a fixed difficulty and disable vardiff. It works per connection so you can choose separate difficulty for each of your miners."
Ive tried d=256 so many times, but it still is on ~1k diff :/, and my antminer wont any "accepted", only alot of Rejected & Discarded
Got latest firmware for the S1, someone knows the soloution for my noobiness? (Ive tried to find some post helping me out but hey ... its not one page
Hope someone got a lovely fridy, not like mine, carproblems, walked over 2 hours, finally home!
Sorry about your car, can't help with that but can help with the ants:
This is not a SHA256 pool, it uses a different algorithm (Scrypt). Your miner won't work here. Use Eligius, bitcoin.cz, or find a p2pool node near you.
Uhhhhhhhh that sucks
, what kinda machine do i need that support scrypt?, wich is the best "pay-out" pools this days?, ive checked Eligus but seems hard to earn something , and gotta check out p2pool :-)Thank for the help!
Regards
And yes cars sucks, litterally
November 14, 2014, 08:24:32 PM
Heya guys!
New in the area but love to hear the FAN going for full speed, BUT i got a problem, i got an Antminer S1 (To start things with, other S3 is on its way )
But i cant use it on clevermining the bot, when i check status the diff is around 1k, and it says and i quote
"Our new stratum server has VARDIFF enabled and it should work great for most users. But if you have a miner with dozens of chips working as a single connection you might want to setup your own difficulty. You can do this by using password d=XXXX where XXXX is number between 128 and 65536 (only powers of 2 are accepted, so 128, 256, 512, etc, e.g. d=512). This will set a fixed difficulty and disable vardiff. It works per connection so you can choose separate difficulty for each of your miners."
Ive tried d=256 so many times, but it still is on ~1k diff :/, and my antminer wont any "accepted", only alot of Rejected & Discarded
Got latest firmware for the S1, someone knows the soloution for my noobiness? (Ive tried to find some post helping me out but hey ... its not one page
Hope someone got a lovely fridy, not like mine, carproblems, walked over 2 hours, finally home!
New in the area but love to hear the FAN going for full speed
, BUT i got a problem, i got an Antminer S1 (To start things with, other S3 is on its way ) But i cant use it on clevermining the bot, when i check status the diff is around 1k, and it says and i quote
"Our new stratum server has VARDIFF enabled and it should work great for most users. But if you have a miner with dozens of chips working as a single connection you might want to setup your own difficulty. You can do this by using password d=XXXX where XXXX is number between 128 and 65536 (only powers of 2 are accepted, so 128, 256, 512, etc, e.g. d=512). This will set a fixed difficulty and disable vardiff. It works per connection so you can choose separate difficulty for each of your miners."
Ive tried d=256 so many times, but it still is on ~1k diff :/, and my antminer wont any "accepted", only alot of Rejected & Discarded
Got latest firmware for the S1, someone knows the soloution for my noobiness? (Ive tried to find some post helping me out but hey ... its not one page
Hope someone got a lovely fridy, not like mine, carproblems, walked over 2 hours, finally home!
Sorry about your car, can't help with that but can help with the ants:
This is not a SHA256 pool, it uses a different algorithm (Scrypt). Your miner won't work here. Use Eligius, bitcoin.cz, or find a p2pool node near you.
November 14, 2014, 08:16:31 PM
Heya guys!
New in the area but love to hear the FAN going for full speed, BUT i got a problem, i got an Antminer S1 (To start things with, other S3 is on its way )
But i cant use it on clevermining the bot, when i check status the diff is around 1k, and it says and i quote
"Our new stratum server has VARDIFF enabled and it should work great for most users. But if you have a miner with dozens of chips working as a single connection you might want to setup your own difficulty. You can do this by using password d=XXXX where XXXX is number between 128 and 65536 (only powers of 2 are accepted, so 128, 256, 512, etc, e.g. d=512). This will set a fixed difficulty and disable vardiff. It works per connection so you can choose separate difficulty for each of your miners."
Ive tried d=256 so many times, but it still is on ~1k diff :/, and my antminer wont any "accepted", only alot of Rejected & Discarded
Got latest firmware for the S1, someone knows the soloution for my noobiness? (Ive tried to find some post helping me out but hey ... its not one page
Hope someone got a lovely fridy, not like mine, carproblems, walked over 2 hours, finally home!
New in the area but love to hear the FAN going for full speed
, BUT i got a problem, i got an Antminer S1 (To start things with, other S3 is on its way ) But i cant use it on clevermining the bot, when i check status the diff is around 1k, and it says and i quote
"Our new stratum server has VARDIFF enabled and it should work great for most users. But if you have a miner with dozens of chips working as a single connection you might want to setup your own difficulty. You can do this by using password d=XXXX where XXXX is number between 128 and 65536 (only powers of 2 are accepted, so 128, 256, 512, etc, e.g. d=512). This will set a fixed difficulty and disable vardiff. It works per connection so you can choose separate difficulty for each of your miners."
Ive tried d=256 so many times, but it still is on ~1k diff :/, and my antminer wont any "accepted", only alot of Rejected & Discarded
Got latest firmware for the S1, someone knows the soloution for my noobiness? (Ive tried to find some post helping me out but hey ... its not one page
Hope someone got a lovely fridy, not like mine, carproblems, walked over 2 hours, finally home!
November 12, 2014, 08:41:42 PM
Thanks man I'll read the docs and make sure I'm doing this the right way because I don't know why it says pool 0 issuing work for an old block
Don't worry about that too much. Get bfgminer to detect your hardware, show hashrate, and submit shares. That old block error is just some harmless stratum miscommunication IIRC.
Cheers everyone and Happy Mining November 12, 2014, 08:35:16 PM
Thanks man I'll read the docs and make sure I'm doing this the right way because I don't know why it says pool 0 issuing work for an old block
Don't worry about that too much. Get bfgminer to detect your hardware, show hashrate, and submit shares. That old block error is just some harmless stratum miscommunication IIRC.
November 12, 2014, 06:44:01 PM
This might sound like a stupid question but I set up a bfgminer and connected it to clevermining.com and how do I know if my miner is actually mining and getting me coins? I have never mined before and I'm using my CPU for mining and looking to upgrade it with antminers or whatever those things are called lol That's how unfamiliar I am with mining. Would anyone be able to help me out or guide me to a forum or site where I can learn to begin mining and which miners to use and how to set them up properly? Much appreciated thanks Cheers everyone
Cheers everyoneHave you checked the stats page on the site for your BTC address?
bfgminer --scrypt ...
First you need to make sure the pool is accepting shares. Set the difficulty manually to the lowest allowed value, i.e. use d=128 as your password. Even at that it will take a long time to find a share with a CPU. Then you can start looking for stats. It doesn't matter if the BTC address is from an exchange.
You should put all that into the command line or create a batch file that starts bfgminer. Don't just double click on the file. E.g.
bfgminer --scrypt -S cpu:all -o stratum+tcp://us.clevermining.com:3333 -u your-btc-address -p d=128
I'm not sure about the "-S cpu:all" part, I've never done CPU mining with bfgminer. Read the docs, try it, ask questions if something comes up.
November 12, 2014, 06:40:31 PM
This might sound like a stupid question but I set up a bfgminer and connected it to clevermining.com and how do I know if my miner is actually mining and getting me coins? I have never mined before and I'm using my CPU for mining and looking to upgrade it with antminers or whatever those things are called lol That's how unfamiliar I am with mining. Would anyone be able to help me out or guide me to a forum or site where I can learn to begin mining and which miners to use and how to set them up properly? Much appreciated thanks Cheers everyone
Cheers everyoneHave you checked the stats page on the site for your BTC address?
bfgminer --scrypt ...
First you need to make sure the pool is accepting shares. Set the difficulty manually to the lowest allowed value, i.e. use d=128 as your password. Even at that it will take a long time to find a share with a CPU. Then you can start looking for stats. It doesn't matter if the BTC address is from an exchange.
You should put all that into the command line or create a batch file that starts bfgminer. Don't just double click on the file. E.g.
bfgminer --scrypt -S cpu:all -o stratum+tcp://us.clevermining.com:3333 -u your-btc-address -p d=128
I'm not sure about the "-S cpu:all" part, I've never done CPU mining with bfgminer. Read the docs, try it, ask questions if something comes up.
November 12, 2014, 06:29:58 PM
This might sound like a stupid question but I set up a bfgminer and connected it to clevermining.com and how do I know if my miner is actually mining and getting me coins? I have never mined before and I'm using my CPU for mining and looking to upgrade it with antminers or whatever those things are called lol That's how unfamiliar I am with mining. Would anyone be able to help me out or guide me to a forum or site where I can learn to begin mining and which miners to use and how to set them up properly? Much appreciated thanks Cheers everyone
Cheers everyoneHave you checked the stats page on the site for your BTC address?
bfgminer --scrypt ...
First you need to make sure the pool is accepting shares. Set the difficulty manually to the lowest allowed value, i.e. use d=128 as your password. Even at that it will take a long time to find a share with a CPU. Then you can start looking for stats. It doesn't matter if the BTC address is from an exchange.
November 12, 2014, 05:11:40 PM
This might sound like a stupid question but I set up a bfgminer and connected it to clevermining.com and how do I know if my miner is actually mining and getting me coins? I have never mined before and I'm using my CPU for mining and looking to upgrade it with antminers or whatever those things are called lol That's how unfamiliar I am with mining. Would anyone be able to help me out or guide me to a forum or site where I can learn to begin mining and which miners to use and how to set them up properly? Much appreciated thanks Cheers everyone
Cheers everyoneHave you checked the stats page on the site for your BTC address?
bfgminer --scrypt ...
First you need to make sure the pool is accepting shares. Set the difficulty manually to the lowest allowed value, i.e. use d=128 as your password. Even at that it will take a long time to find a share with a CPU. Then you can start looking for stats. It doesn't matter if the BTC address is from an exchange.
November 12, 2014, 05:05:59 PM
This might sound like a stupid question but I set up a bfgminer and connected it to clevermining.com and how do I know if my miner is actually mining and getting me coins? I have never mined before and I'm using my CPU for mining and looking to upgrade it with antminers or whatever those things are called lol That's how unfamiliar I am with mining. Would anyone be able to help me out or guide me to a forum or site where I can learn to begin mining and which miners to use and how to set them up properly? Much appreciated thanks Cheers everyone
Cheers everyoneHave you checked the stats page on the site for your BTC address?
November 12, 2014, 05:04:17 PM
This might sound like a stupid question but I set up a bfgminer and connected it to clevermining.com and how do I know if my miner is actually mining and getting me coins? I have never mined before and I'm using my CPU for mining and looking to upgrade it with antminers or whatever those things are called lol That's how unfamiliar I am with mining. Would anyone be able to help me out or guide me to a forum or site where I can learn to begin mining and which miners to use and how to set them up properly? Much appreciated thanks Cheers everyone
Cheers everyoneHave you checked the stats page on the site for your BTC address?
November 12, 2014, 05:02:40 PM
This might sound like a stupid question but I set up a bfgminer and connected it to clevermining.com and how do I know if my miner is actually mining and getting me coins? I have never mined before and I'm using my CPU for mining and looking to upgrade it with antminers or whatever those things are called lol That's how unfamiliar I am with mining. Would anyone be able to help me out or guide me to a forum or site where I can learn to begin mining and which miners to use and how to set them up properly? Much appreciated thanks Cheers everyone
Cheers everyoneHave you checked the stats page on the site for your BTC address?
November 12, 2014, 01:47:43 PM
This might sound like a stupid question but I set up a bfgminer and connected it to clevermining.com and how do I know if my miner is actually mining and getting me coins? I have never mined before and I'm using my CPU for mining and looking to upgrade it with antminers or whatever those things are called lol That's how unfamiliar I am with mining. Would anyone be able to help me out or guide me to a forum or site where I can learn to begin mining and which miners to use and how to set them up properly? Much appreciated thanks Cheers everyone
Cheers everyone November 11, 2014, 05:26:40 PM
Hello our BTC address has also not received a payout our address is : 16iygeWD8RVL7FKKSvTnc5UjaPHqZ3EBEt
we have .67 btc, with no payouts yet. Please initiate payout so we can confirm its working properly or PM if there is an issue thanks Terk! then we can restart our mining at clevermining.
we have .67 btc, with no payouts yet. Please initiate payout so we can confirm its working properly or PM if there is an issue thanks Terk! then we can restart our mining at clevermining.
PM'ing Terk yourself will get it done faster.
November 11, 2014, 07:27:23 AM
hi terk
i have been mining for 2 weeks
without a payout 0.37 btc is stuck
please payout
i have been mining for 2 weeks
without a payout 0.37 btc is stuck
please payout
November 08, 2014, 02:59:28 PM
Thanks.
I just started to use this pool.
I am getting 100% reject rates at the moment?
Thoughts? Do I have something setup incorrectly? Followed the instructions. Have about 2Th's aimed at this pool due to the payout stats, so I hope this is not a big issue with the pool but some thing on my end....
Thanks!
I am getting 100% reject rates at the moment?
Thoughts? Do I have something setup incorrectly? Followed the instructions. Have about 2Th's aimed at this pool due to the payout stats, so I hope this is not a big issue with the pool but some thing on my end....
Thanks!
This is not a SHA256 pool, it uses a different algorithm (Scrypt). Your miner won't work here. Use Eligius, bitcoin.cz, or find a p2pool node near you.
Jump to: