Still getting quite a few rejected shares...
Me too... More than 50% rejects with the same errors as before. The hashing power of the entire pool is still dropping off as well.
Topic: [ANN][LTC][Pool][PPLNS] WeMineLTC.com | 0% FEES! | Stratum | DDoS Protection |!! - page 35. (Read 74287 times)
April 09, 2013, 06:02:01 PM
Me too... More than 50% rejects with the same errors as before. The hashing power of the entire pool is still dropping off as well.
April 09, 2013, 05:40:11 PM
Still getting quite a few rejected shares...
April 09, 2013, 05:35:52 PM
Hello,
Nice pool or though it would seem. I like that you have implemented Stratum...
I tried it out with CGminer 2.10.4 on xubuntu, using the same 7970s with the same settings I was using at Burnside's pool... Cards were working fine,
But I kept getting these reject errors, about not being able to create "so" in UNIX or somesuch. If this sounds familiar let me know; if not i'll do it again and copy & paste the error.
I switched back to burnside, as I have been getting good returns there, just that I'm getting a larger than desirable reject percentage even over there ... I *thought* it had something to do with burnside not incorporating stratum yet -- hence why I tried your pool.
Can you help me with this? I'll go wherever I get the least rejects... thanks!
Nice pool or though it would seem. I like that you have implemented Stratum...
I tried it out with CGminer 2.10.4 on xubuntu, using the same 7970s with the same settings I was using at Burnside's pool... Cards were working fine,
But I kept getting these reject errors, about not being able to create "so" in UNIX or somesuch. If this sounds familiar let me know; if not i'll do it again and copy & paste the error.
I switched back to burnside, as I have been getting good returns there, just that I'm getting a larger than desirable reject percentage even over there ... I *thought* it had something to do with burnside not incorporating stratum yet -- hence why I tried your pool.
Can you help me with this? I'll go wherever I get the least rejects... thanks!
hello and thanks for trusting us! We had an attack undergoing but we managed to completely block it and its working perfectly now! You shouldnt have rejects with us now, the error you were getting was due to the attack which is blocked !
Come and give us a try !
April 09, 2013, 03:43:57 PM
Hello,
Nice pool or though it would seem. I like that you have implemented Stratum...
I tried it out with CGminer 2.10.4 on xubuntu, using the same 7970s with the same settings I was using at Burnside's pool... Cards were working fine,
But I kept getting these reject errors, about not being able to create "so" in UNIX or somesuch. If this sounds familiar let me know; if not i'll do it again and copy & paste the error.
I switched back to burnside, as I have been getting good returns there, just that I'm getting a larger than desirable reject percentage even over there ... I *thought* it had something to do with burnside not incorporating stratum yet -- hence why I tried your pool.
Can you help me with this? I'll go wherever I get the least rejects... thanks!
Nice pool or though it would seem. I like that you have implemented Stratum...
I tried it out with CGminer 2.10.4 on xubuntu, using the same 7970s with the same settings I was using at Burnside's pool... Cards were working fine,
But I kept getting these reject errors, about not being able to create "so" in UNIX or somesuch. If this sounds familiar let me know; if not i'll do it again and copy & paste the error.
I switched back to burnside, as I have been getting good returns there, just that I'm getting a larger than desirable reject percentage even over there ... I *thought* it had something to do with burnside not incorporating stratum yet -- hence why I tried your pool.
Can you help me with this? I'll go wherever I get the least rejects... thanks!
April 09, 2013, 02:35:37 PM
We have some issues wirth the pool atm, we go into the code line by line and we try to figure this out. Will update asap!!
April 09, 2013, 02:00:36 PM
its going back up. it dipped really low for all reported miners. as if pplns wasn't random enough
Yeah, I thought it was fixed too. I switched my rigs back and it's doing it again...
April 09, 2013, 01:35:31 PM
its going back up. it dipped really low for all reported miners. as if pplns wasn't random enough
April 09, 2013, 01:03:32 PM
Now it's over 50% rejects and the pool is down to 29.86 MH/s from approx 145 MH/s when this started. I'm out for now... be back when it's fixed.
April 09, 2013, 12:58:30 PM
Something is "very" wrong with the pool. Almost 50% rejects with error: "2001, Can't create UNIX so". The hashrate of the entire pool is dropping fast.
April 09, 2013, 12:00:44 PM
they've just gotten rather unlucky, have you guys read what pplns means? because it sounds like you expect straight pps
I think i understand the concept, but in the longterm should'nt my daily average be close to 1,8-1,9LTC even do its random distributed?
Second, this is what it looks like under "My Workers", and it makes me worry that something wrong?
I know that all the workers are up and running, getting blocks and all.
Will this affect my performance? Can i tune the settings to find blocks faster? Or is this on the serverside?
April 09, 2013, 11:53:05 AM
they've just gotten rather unlucky, have you guys read what pplns means? because it sounds like you expect straight pps
I think i understand the concept, but in the longterm should'nt my daily average be close to 1,8-1,9LTC even do its random distributed?
Second, this is what it looks like under "My Workers", and it makes me worry that something wrong?
I know that all the workers are up and running, getting blocks and all.
April 09, 2013, 11:34:41 AM
they've just gotten rather unlucky, have you guys read what pplns means? because it sounds like you expect straight pps
I think i understand the concept, but in the longterm should'nt my daily average be close to 1,8-1,9LTC even do its random distributed?
Second, this is what it looks like under "My Workers", and it makes me worry that something wrong?
I know that all the workers are up and running, getting blocks and all.
April 09, 2013, 11:28:44 AM
Well, at 140mh/s we should be finding a block every 2 hours so I think it should even out very quickly now.
Ive got a couple rigs aimed at it, hoping for the best, because I really like the concept and execution.
Ive got a couple rigs aimed at it, hoping for the best, because I really like the concept and execution.
Yes finally luck is on our side
On a side note, we just broke 140 Mhses/sec... April 09, 2013, 10:11:37 AM
Well, at 140mh/s we should be finding a block every 2 hours so I think it should even out very quickly now.
Ive got a couple rigs aimed at it, hoping for the best, because I really like the concept and execution.
Ive got a couple rigs aimed at it, hoping for the best, because I really like the concept and execution.
April 09, 2013, 10:06:01 AM
We may also end up with a streak of luck and you will miss out. That is the fun of it.
What, like finding 2 blocks within 10 minutes of each other?
http://i.imgur.com/ZUmRQrG.png
April 09, 2013, 08:54:11 AM
they've just gotten rather unlucky, have you guys read what pplns means? because it sounds like you expect straight pps
April 09, 2013, 08:42:44 AM
Hi, im mining at this pool now with my 3 workers, they have a combined power of about 900Mh/s, the last 12 hours i only earned 0.01075635 LTC ... that's low. According to a LTC calculator i should get about 1,8-1,9 LTC for that period? I hope to see better results. Will mine on this pool for a few days until my new hardware arrives. Cheers
I have the same problem, left my PC on over night at about 300KH/s according to CGMiner.
My current account balance, which is from way more than what I did last night: 0.024901459999999997 LTC
April 09, 2013, 07:52:13 AM
Please implement either port 80, 8080 or 443 mining!
April 09, 2013, 05:03:58 AM
Hi, im mining at this pool now with my 3 workers, they have a combined power of about 900Mh/s, the last 12 hours i only earned 0.01075635 LTC ... that's low. According to a LTC calculator i should get about 1,8-1,9 LTC for that period? I hope to see better results. Will mine on this pool for a few days until my new hardware arrives. Cheers
April 09, 2013, 04:28:51 AM
We broke the 100MHses barrier AND we found our 3rd block as well !
THANK you all for your continuous support!
THANK you all for your continuous support!
Jump to: