Topic: [ANN][LTC][Pool][PPLNS] WeMineLTC.com | 0% FEES! | Stratum | DDoS Protection |!! - page 31. (Read 74351 times)
April 13, 2013, 12:13:30 AM
This pool looks real promising so far - def thinking of switching. Nice interface/layout and admin seems helpful.
April 12, 2013, 09:17:57 PM
Start from Intensity 13!
April 12, 2013, 08:55:48 PM
make all cores around 890~930 and try intensity 13. Also where you have set your memory? Put a screenshot up form cgminer to see that everything is ok 
This is what i currently have, the cooling is somewhat insufficent so i had to lower the core on card #0 to get temps below 85C.
no wonder at I18 never go over 17 at the most. -i 16 is max in most cases and i 17 on extreme and thats pushing the cards too much all the HW errors you are getting the E on your work will be rubish and will be costing you running it getting more hardware errors Drop your intense down to 16 if you continue mining at that Intence ull end up killing your card and getting al lthe m HW errors thats almost over 1,000+ shares faild to mine becasue of the hardware errors.
April 12, 2013, 08:42:44 PM
make all cores around 890~930 and try intensity 13. Also where you have set your memory? Put a screenshot up form cgminer to see that everything is ok
This is what i currently have, the cooling is somewhat insufficent so i had to lower the core on card #0 to get temps below 85C.
You've got a lot of hardware errors... It should be 0. Try lowering your Intensity.
April 12, 2013, 08:10:34 PM
make all cores around 890~930 and try intensity 13. Also where you have set your memory? Put a screenshot up form cgminer to see that everything is ok
This is what i currently have, the cooling is somewhat insufficent so i had to lower the core on card #0 to get temps below 85C.
April 12, 2013, 07:43:13 PM
Well given the whole notroll.in debacle unfolded in an unfortunate way, I'm now on board and throwing my piddly 500-510khs your way.
You are more than welcomed! Please post your feedback upon trying for others to see as well
April 12, 2013, 06:25:49 PM
Aaaaaaand 300 Mhses wall has been taken down!! THANK YOU ALL !!!
April 12, 2013, 06:10:47 PM
make all cores around 890~930 and try intensity 13. Also where you have set your memory? Put a screenshot up form cgminer to see that everything is ok
April 12, 2013, 05:53:00 PM
Looking good.
Can't help you too much with your 7950s as there are much better people then me to guide you but I remember reading about setting the concurrency threads to optimise the hash rate.
Can't help you too much with your 7950s as there are much better people then me to guide you but I remember reading about setting the concurrency threads to optimise the hash rate.
Someone recommended this setting:
"cgminer.exe --scrypt -o stratum+tcp://poolhere:3333 -u username -p password --worksize 256 --thread-concurrency 16384 --vectors 1 --intensity 18 -g 1 --lookup-gap 2"
Use this! cgminer --scrypt -o stratum+tcp://eu.wemineltc.com:3333 -u username.1 -p xxx --intensity 13 --worksize 256 -g 1 --thread-concurrency 8192
However, on the AfterBurner INCREASE the memory clock!! LTC mining uses Memory speed, so the higher the better. Also try to keep a rartio of 0.57~0.60 from Memory Clock vs Core clock so put memory on max and keep cote clock to the 920~930 range
Try this and let me know how it worked for you
Now its running at about 1450-1500Kh/s and default setting and 20 intens, cores @ 750, 900, 900
I will try this setting soon.
April 12, 2013, 05:51:34 PM
thnx for the tip.
I have 3 xfx R7970 3gb cards.
Display device : AMD Radeon HD 7900 Series on Tahiti GPU
Display driver : 9.14.10.0945, Catalyst 13.1
BIOS : 015.022.000.001
GUID : VEN_1002&DEV_6798&SUBSYS_32141682&REV_00&BUS_1&DEV_0&FN_0
Multi-GPU role : master
I did not overclock them yet and used --scrypt -o stratum+tcp://eu.wemineltc.com:3333 -u bitdelver.1 -p -I 12 to start the cgminder
I used the tip to change i13 to i12 i dont get any HW right now but the hashrate also dropped big time. 842 ks/s for 3 cards is low. If someone wants to help we can also use skype or team viewer.
I have 3 xfx R7970 3gb cards.
Display device : AMD Radeon HD 7900 Series on Tahiti GPU
Display driver : 9.14.10.0945, Catalyst 13.1
BIOS : 015.022.000.001
GUID : VEN_1002&DEV_6798&SUBSYS_32141682&REV_00&BUS_1&DEV_0&FN_0
Multi-GPU role : master
I did not overclock them yet and used --scrypt -o stratum+tcp://eu.wemineltc.com:3333 -u bitdelver.1 -p
-I 12 to start the cgminderI used the tip to change i13 to i12 i dont get any HW right now but the hashrate also dropped big time. 842 ks/s for 3 cards is low. If someone wants to help we can also use skype or team viewer.
Make sure you have your memory clock to the max and the core of the cards to aroudn the 900~930 limit!! Let me knwo how it worked for you also
April 12, 2013, 05:50:43 PM
Looking good.
Can't help you too much with your 7950s as there are much better people then me to guide you but I remember reading about setting the concurrency threads to optimise the hash rate.
Can't help you too much with your 7950s as there are much better people then me to guide you but I remember reading about setting the concurrency threads to optimise the hash rate.
Someone recommended this setting:
"cgminer.exe --scrypt -o stratum+tcp://poolhere:3333 -u username -p password --worksize 256 --thread-concurrency 16384 --vectors 1 --intensity 18 -g 1 --lookup-gap 2"
Use this! cgminer --scrypt -o stratum+tcp://eu.wemineltc.com:3333 -u username.1 -p xxx --intensity 13 --worksize 256 -g 1 --thread-concurrency 8192
However, on the AfterBurner INCREASE the memory clock!! LTC mining uses Memory speed, so the higher the better. Also try to keep a rartio of 0.57~0.60 from Memory Clock vs Core clock so put memory on max and keep cote clock to the 920~930 range
Try this and let me know how it worked for you
April 12, 2013, 04:32:37 PM
Looking good.
Can't help you too much with your 7950s as there are much better people then me to guide you but I remember reading about setting the concurrency threads to optimise the hash rate.
Can't help you too much with your 7950s as there are much better people then me to guide you but I remember reading about setting the concurrency threads to optimise the hash rate.
Someone recommended this setting:
"cgminer.exe --scrypt -o stratum+tcp://poolhere:3333 -u username -p password --worksize 256 --thread-concurrency 16384 --vectors 1 --intensity 18 -g 1 --lookup-gap 2"
April 12, 2013, 04:26:19 PM
Looking good.
Can't help you too much with your 7950s as there are much better people then me to guide you but I remember reading about setting the concurrency threads to optimise the hash rate.
Can't help you too much with your 7950s as there are much better people then me to guide you but I remember reading about setting the concurrency threads to optimise the hash rate.
April 12, 2013, 04:22:58 PM
Did you make sure you're using the --scypt command at the prompt?
Mine looks like this (I run 6950s so don't copy everything exactly),
cgminer --scrypt -o stratum+tcp://eu.wemineltc.com:3333 -u username.1 -p xxx --intensity 18 --worksize 256 -g 1 --thread-concurrency 8192
Mine looks like this (I run 6950s so don't copy everything exactly),
cgminer --scrypt -o stratum+tcp://eu.wemineltc.com:3333 -u username.1 -p xxx --intensity 18 --worksize 256 -g 1 --thread-concurrency 8192
Yes now i downloaded the autogenerated bat file from wemineltc, and i think its working properly now, even do it need tweaking.
This is what the *.bat file says:
cgminer.exe --scrypt -o stratum+tcp://eu.wemineltc.com:3333 -u user -p pass -I 13
April 12, 2013, 04:22:09 PM
Well given the whole notroll.in debacle unfolded in an unfortunate way, I'm now on board and throwing my piddly 500-510khs your way.
April 12, 2013, 04:14:48 PM
Did you make sure you're using the --scypt command at the prompt?
Mine looks like this (I run 6950s so don't copy everything exactly),
cgminer --scrypt -o stratum+tcp://eu.wemineltc.com:3333 -u username.1 -p xxx --intensity 18 --worksize 256 -g 1 --thread-concurrency 8192
Mine looks like this (I run 6950s so don't copy everything exactly),
cgminer --scrypt -o stratum+tcp://eu.wemineltc.com:3333 -u username.1 -p xxx --intensity 18 --worksize 256 -g 1 --thread-concurrency 8192
April 12, 2013, 04:11:39 PM
i'm mining with 1550 khash for 9 hours now and the site keeps saying i only mine with 457 KH/s the payout for the 9 hours was 0.44 LTC. If i use calculators i should get that every hour.
What is going wrong?
Ps i did a reset accepted share total for today = 3468
What is going wrong?
Ps i did a reset accepted share total for today = 3468
Its because you havent set your miners properly. Dont check only the Hash Rate, do yuo see this WU on the top right of your screen? WU stands for Work Utility, and your current one is 428.8 atm. Thus why your Khses is calculated around there. Try play with your settings abit, plus check your temperatures. I see 91 oC on one of your cards, it could seriously blow off!
Try to decrease the Intensity to 12 and see what results you are getting! Also make sure you use latest drivers!Post any updates so we could help you further!
your screenshot shows that roughly 3/4 of your shares are corrupted. example GPU0 has 126 shares accepted by the pool and 327 shares invalid due to hardware errors...
I got such figures when I messed around with the thread-concurreny and intensity in cgminer.
Make sure your HW: columns all read "0"
Hi my system has currently about 1.4Gh/s but the WU seems very low at 19.5/m . Please help me to identify any other problem. Got 3x 7950 @ stock
? Im connected to WeMineLTC? Doesnt that make me mine LTC's, have i missed something fundamental here?
Your hashing power shows your not mining LTC and probably BTC.
The entire WeMineLTC pool is barely 300 mh/s and yours is showing 1.4 gh/s.
How can this be and what should i do to change this?
April 12, 2013, 04:08:02 PM
Hi my system has currently about 1.4Gh/s but the WU seems very low at 19.5/m . Please help me to identify any other problem. Got 3x 7950 @ stock
? Im connected to WeMineLTC? Doesnt that make me mine LTC's, have i missed something fundamental here?
Your hashing power shows your not mining LTC and probably BTC.
The entire WeMineLTC pool is barely 300 mh/s and yours is showing 1.4 gh/s.
edit: Did you make sure you're using the --scypt command at the prompt?
April 12, 2013, 04:01:28 PM
i'm mining with 1550 khash for 9 hours now and the site keeps saying i only mine with 457 KH/s the payout for the 9 hours was 0.44 LTC. If i use calculators i should get that every hour.
What is going wrong?
Ps i did a reset accepted share total for today = 3468
What is going wrong?
Ps i did a reset accepted share total for today = 3468
Its because you havent set your miners properly. Dont check only the Hash Rate, do yuo see this WU on the top right of your screen? WU stands for Work Utility, and your current one is 428.8 atm. Thus why your Khses is calculated around there. Try play with your settings abit, plus check your temperatures. I see 91 oC on one of your cards, it could seriously blow off!
Try to decrease the Intensity to 12 and see what results you are getting! Also make sure you use latest drivers!Post any updates so we could help you further!
your screenshot shows that roughly 3/4 of your shares are corrupted. example GPU0 has 126 shares accepted by the pool and 327 shares invalid due to hardware errors...
I got such figures when I messed around with the thread-concurreny and intensity in cgminer.
Make sure your HW: columns all read "0"
Hi my system has currently about 1.4Gh/s but the WU seems very low at 19.5/m . Please help me to identify any other problem. Got 3x 7950 @ stock
? Im connected to WeMineLTC? Doesnt that make me mine LTC's, have i missed something fundamental here?
April 12, 2013, 04:01:20 PM
you have a lot of rejected shares
Jump to: