Any reason for this pump?
Ive got a bit and then realised that its shot up over the last 24 hours?
Can we expect a dump soon?
Topic: [ANN][MONA] Monacoin LAUNCHING 2014/01/01 0:00 GMT - page 45. (Read 283626 times)
Would love to be mining this but struggling with constant system crashes on otherwise stable rigs (ccminer is crashing when using lyra2rev2 algo even when my cards are at factory settings, with nothing overclock at all).
Can someone who is using GTX 1070s please post their overclock settings, their driver version, cuda version, and anything else that might help?
Thanks
Can someone who is using GTX 1070s please post their overclock settings, their driver version, cuda version, and anything else that might help?
Thanks
New Pool Monacoin 0.9 Fee
http://pool.mineblocks.co.uk/getting_started
Configure Your Miners
stratum+tcp://stratum.mineblocks.co.uk:3020 -u YOUR WALLET -p x
Ports ( 3020 ) ( 3021 Nicehash ) All ports Vardiff
Twitter : https://twitter.com/MineBlocksPool
Telegram : https://t.me/mineblocksp
Happy Mining
http://pool.mineblocks.co.uk/getting_started
Configure Your Miners
stratum+tcp://stratum.mineblocks.co.uk:3020 -u YOUR WALLET -p x
Ports ( 3020 ) ( 3021 Nicehash ) All ports Vardiff
Twitter : https://twitter.com/MineBlocksPool
Telegram : https://t.me/mineblocksp
Happy Mining
Getting ready for the next Pump. It has been quietly accumulating. 
Japanese are holding the coin under 195 yen to accumulate more on Bittrex where they get the numbers.
Japanese are holding the coin under 195 yen to accumulate more on Bittrex where they get the numbers.
Is there a slack, telegram, or discord for this coin?
Nothing like it. This coin is gaining a lot of interest in Japan and I believe the Japanese will make it go where they brought NEM before.
Just have a look at their fiat exchanges for Mona:
https://fcce.jp/trade_mona_jpy
https://zaif.jp/trade_mona_jpy
If it just had 1/4 the Mkt cap of NEM thats $23 , after the DASH ETH and LTC run anything is possible
With the number of coins on coinmarketcap: 54,574,150 Mona X 23 would make = 1 255 205 450$.
That's about 2/3 of NEM.
i am using CCminer 2.2.2 version run so far it never crashed.
Hey - can you please share your OC settings? Which exact cards have you got?
Monacoin MONA $ 2.4099957 +60.16 % ripp baby
Please come joins us in mining at www.l8nit3-miners.com
MonaCoin mining has been enabled in beta status at yiimp.l8nit3-miners.com
-a scrypt -o stratum+tcp://yiimp.l8nit3-miners.com:3433 -u MEK3yBBaGeWxWYqp3WgMHyMYm8rQEw41WX -p c=MONA
Happy mining!
[pool Located in Los Angeles USA]
MonaCoin mining has been enabled in beta status at yiimp.l8nit3-miners.com
-a scrypt -o stratum+tcp://yiimp.l8nit3-miners.com:3433 -u MEK3yBBaGeWxWYqp3WgMHyMYm8rQEw41WX -p c=MONA
Happy mining!
[pool Located in Los Angeles USA]
Is there a slack, telegram, or discord for this coin?
Nothing like it. This coin is gaining a lot of interest in Japan and I believe the Japanese will make it go where they brought NEM before.
Just have a look at their fiat exchanges for Mona:
https://fcce.jp/trade_mona_jpy
https://zaif.jp/trade_mona_jpy
If it just had 1/4 the Mkt cap of NEM thats $23 , after the DASH ETH and LTC run anything is possible
Is there a slack, telegram, or discord for this coin?
Nothing like it. This coin is gaining a lot of interest in Japan and I believe the Japanese will make it go where they brought NEM before.
Just have a look at their fiat exchanges for Mona:
https://fcce.jp/trade_mona_jpy
https://zaif.jp/trade_mona_jpy
Is there a slack, telegram, or discord for this coin?
nice, now its dumping again
wait for bitflyer trade start. It will go 10-20$ easily.
when is that?
Please come joins us in mining at www.l8nit3-miners.com
MonaCoin mining has been enabled in beta status at yiimp.l8nit3-miners.com
-a lyra2v2 -o stratum+tcp://yiimp.l8nit3-miners.com:4533 -u MEK3yBBaGeWxWYqp3WgMHyMYm8rQEw41WX -p c=MONA
Happy mining!
[pool Located in Los Angeles USA]
MonaCoin mining has been enabled in beta status at yiimp.l8nit3-miners.com
-a lyra2v2 -o stratum+tcp://yiimp.l8nit3-miners.com:4533 -u MEK3yBBaGeWxWYqp3WgMHyMYm8rQEw41WX -p c=MONA
Happy mining!
[pool Located in Los Angeles USA]
I'm mining on Suprnova with no problems from North America.
Sell it now! It will dump very hard.
Im looking for a pool in North America, any suggestions ?
Edit:
using asicpool in NY
Edit:
using asicpool in NY
if you have only 1 cards, you are waisting your time by mining ... better buy , its still cheap now...
i was mining with 1080ti month ago, it was about 5 mona per day , now its over
i was mining with 1080ti month ago, it was about 5 mona per day , now its over
Actually I mine with a 6x1070 rig, but I just wanted to test it on my desktop first.
My settings:
- 6x GTX 1070
- ccMiner-x64 v2.2.2 (CUDA v9.7)
- Driver: v384.76
- Pool: suprnova:2995
- Hashrate: 205 MH/s (the whole rig)
- Intensity: 22
Should I fine tune something to reach better results or is it good already?
Monacoin today the new pumping coin? 
if you have only 1 cards, you are waisting your time by mining ... better buy , its still cheap now...
i was mining with 1080ti month ago, it was about 5 mona per day , now its over
i was mining with 1080ti month ago, it was about 5 mona per day , now its over
Could you please give me some info about mining?
I started to mine it with a single RX 480 8GB (not modded, it's just for initial test). So I downloaded SG miner 5.5.5 and configured to suprnova pool.
When I started to mine (2 days ago) I could reach 11-12 MH/s by setting a proper intensity (i know it's still worse than with GTX cards). I realized that i configured the wallet user wrong and I was mining for some default wallet. After correcting it, the hash rate went down to 4.5 MH/s. That's a huge change! Please help what the heck happens?
In short:
- RX 480 (original BIOS) with 8 GB (stable @ 1303/2200 MHz, GPU load: 100%)
- SG miner v5.5.5
- Intensity: 20
- Temp: 59 C
- Win10 x64 16 GB
- Every package is accepted, no invalid calculations
- Hash rate = ~ 4.5 MH/s <---
WHY?
Second question: for GTX1070, which is the best miner/pool combo?
I started to mine it with a single RX 480 8GB (not modded, it's just for initial test). So I downloaded SG miner 5.5.5 and configured to suprnova pool.
When I started to mine (2 days ago) I could reach 11-12 MH/s by setting a proper intensity (i know it's still worse than with GTX cards). I realized that i configured the wallet user wrong and I was mining for some default wallet. After correcting it, the hash rate went down to 4.5 MH/s. That's a huge change! Please help what the heck happens?
In short:
- RX 480 (original BIOS) with 8 GB (stable @ 1303/2200 MHz, GPU load: 100%)
- SG miner v5.5.5
- Intensity: 20
- Temp: 59 C
- Win10 x64 16 GB
- Every package is accepted, no invalid calculations
- Hash rate = ~ 4.5 MH/s <---
WHY?Second question: for GTX1070, which is the best miner/pool combo?
Jump to: