Topic: [ANN][MULTI][VARDIFF] TradeMyBit MULTIALGO Profit Swap w/ Optional Auto-exchange - page 49. (Read 153067 times)
April 29, 2014, 05:40:25 AM
Ive been on this pool for some time, profitability is good. Sadly it gets reduced by the fact that pool resets after every coin switch. Is there a way how to avoid it? From my experience other profit-change pools dont do that (e.g. middlecoin). Thanks, BakSAj
April 29, 2014, 04:28:16 AM
How do people connect to the 4440 port?
I have tried to connect but all I get is that there is no work available from the pool.
I am using:
-o stratum+tcp://stratum-us.trademybit.com:4440 -u %usern% -p %pass%
The multiport works fine for NScrypt and Scrypt.
My miner is sph-sgminer.
I have tried to connect but all I get is that there is no work available from the pool.
I am using:
-o stratum+tcp://stratum-us.trademybit.com:4440 -u %usern% -p %pass%
The multiport works fine for NScrypt and Scrypt.
My miner is sph-sgminer.
April 29, 2014, 01:24:21 AM
merc82!
Kick-ass addition finally displaying the per-algorithm pool hashrate!
Keep adding more X11 DO IT DO EEEEET
Kick-ass addition finally displaying the per-algorithm pool hashrate!
Keep adding more X11 DO IT DO EEEEET
April 29, 2014, 12:17:25 AM
Hello merc82,
I am mining at TradeMyBit pool user 'bankz'.
Please help check my TOTAL estimated 24 BTC earning.
Recently it was 0.05x, 0.04x and now 0.033.
I have been switching my miner mostly mining 'GPU Coin' (most of the time 0.006xx) and 'Multiport'
My hashrate is 10 MHash(scrypt) from my side and a little bit less in yours.
Should my TOTAL estimated 24 BTC earning be something around 0.05x - 0.06x ?
Thank you.
I am mining at TradeMyBit pool user 'bankz'.
Please help check my TOTAL estimated 24 BTC earning.
Recently it was 0.05x, 0.04x and now 0.033.
I have been switching my miner mostly mining 'GPU Coin' (most of the time 0.006xx) and 'Multiport'
My hashrate is 10 MHash(scrypt) from my side and a little bit less in yours.
Should my TOTAL estimated 24 BTC earning be something around 0.05x - 0.06x ?
Thank you.
April 28, 2014, 10:36:17 PM
Nowhere on your website do I see the scrypt-N pool's hashrate.
Nowhere on your website do I see my btc/mhs/day.
Where are these stats hiding for Scrypt-N? I would like to see which
algo's multipool is performing best and set my gpus to that.
Thanks
Nowhere on your website do I see my btc/mhs/day.
Where are these stats hiding for Scrypt-N? I would like to see which
algo's multipool is performing best and set my gpus to that.
Thanks
Hashrate per algo is now displayed.
BTC/MH/Day is not displayed, as I've stated previously it is not possible to accurately calculate as there are a ton of different variables that go into each users payouts -- which users they keep, do they stay on one algo all day, etc.. The best way to figure out how the payouts are, is to give it a test
I have 280x's if it matters, and they are tuned well for both algos.
The top says pool rate 3gh/s, but it DOES NOT SAY WHICH POOL. I ASSUME IT IS SCRYPT,
SO WHERE IS THE POOL RATE OF YOUR SCRYPT-N POOL DISPLAYED?
http://gyazo.com/00e729160e84a4413af600b8ff56b976
Where it lists the different ports.. in big letters
April 28, 2014, 08:18:46 PM
Nowhere on your website do I see the scrypt-N pool's hashrate.
Nowhere on your website do I see my btc/mhs/day.
Where are these stats hiding for Scrypt-N? I would like to see which
algo's multipool is performing best and set my gpus to that.
Thanks
Nowhere on your website do I see my btc/mhs/day.
Where are these stats hiding for Scrypt-N? I would like to see which
algo's multipool is performing best and set my gpus to that.
Thanks
Hashrate per algo is now displayed.
BTC/MH/Day is not displayed, as I've stated previously it is not possible to accurately calculate as there are a ton of different variables that go into each users payouts -- which users they keep, do they stay on one algo all day, etc.. The best way to figure out how the payouts are, is to give it a test
I have 280x's if it matters, and they are tuned well for both algos.
The top says pool rate 3gh/s, but it DOES NOT SAY WHICH POOL. I ASSUME IT IS SCRYPT,
SO WHERE IS THE POOL RATE OF YOUR SCRYPT-N POOL DISPLAYED?
April 28, 2014, 07:34:50 PM
Nowhere on your website do I see the scrypt-N pool's hashrate.
Nowhere on your website do I see my btc/mhs/day.
Where are these stats hiding for Scrypt-N? I would like to see which
algo's multipool is performing best and set my gpus to that.
Thanks
Nowhere on your website do I see my btc/mhs/day.
Where are these stats hiding for Scrypt-N? I would like to see which
algo's multipool is performing best and set my gpus to that.
Thanks
Hashrate per algo is now displayed.
BTC/MH/Day is not displayed, as I've stated previously it is not possible to accurately calculate as there are a ton of different variables that go into each users payouts -- which users they keep, do they stay on one algo all day, etc.. The best way to figure out how the payouts are, is to give it a test
April 28, 2014, 12:55:46 PM
Nowhere on your website do I see the scrypt-N pool's hashrate.
Nowhere on your website do I see my btc/mhs/day.
Where are these stats hiding for Scrypt-N? I would like to see which
algo's multipool is performing best and set my gpus to that.
Thanks
Nowhere on your website do I see my btc/mhs/day.
Where are these stats hiding for Scrypt-N? I would like to see which
algo's multipool is performing best and set my gpus to that.
Thanks
On the frontpage at Mining Statistics there are all infos you could find. Algo, BTC/mhs/day, hashrate , current mined coin, etc. you can see when the last block was found and much more info.. idk if you ever looked at the site ...
thx Pelk
April 28, 2014, 12:29:49 PM
Nowhere on your website do I see the scrypt-N pool's hashrate.
Nowhere on your website do I see my btc/mhs/day.
Where are these stats hiding for Scrypt-N? I would like to see which
algo's multipool is performing best and set my gpus to that.
Thanks
Nowhere on your website do I see my btc/mhs/day.
Where are these stats hiding for Scrypt-N? I would like to see which
algo's multipool is performing best and set my gpus to that.
Thanks
April 28, 2014, 12:09:38 PM
Hi there, i might be blind, but i cant seem to find the irc adress.
EDIT* nvm its ofc on the fking home page.
EDIT* nvm its ofc on the fking home page.
April 28, 2014, 02:42:58 AM
Thanks man! Keep up the good work, see if we can get more coins added so we can truly get the benefits of a multiport in its earliest stages!
April 27, 2014, 11:06:17 PM
merc82 thanks for adding the X11 multiport.
Can you add these coins? Quebecoin, Logicoin, HighFiveCoin, BadgerCoin?
Also, is BTC/MH/Day so low for X11 because technically X11 has a higher xMH multiplier? Will X11 always be so low?
Can you add these coins? Quebecoin, Logicoin, HighFiveCoin, BadgerCoin?
Also, is BTC/MH/Day so low for X11 because technically X11 has a higher xMH multiplier? Will X11 always be so low?
QBC was added today. The btc/mhash/day is 'normalized' to your scrypt mhash, assuming you get 2.9x hash with x11 than you do with scrypt.. so it is calculated at 2.9mhash for x11
April 27, 2014, 07:11:24 PM
merc82 thanks for adding the X11 multiport.
Can you add these coins? Quebecoin, Logicoin, HighFiveCoin, BadgerCoin?
Also, is BTC/MH/Day so low for X11 because technically X11 has a higher xMH multiplier? Will X11 always be so low?
Can you add these coins? Quebecoin, Logicoin, HighFiveCoin, BadgerCoin?
Also, is BTC/MH/Day so low for X11 because technically X11 has a higher xMH multiplier? Will X11 always be so low?
April 27, 2014, 07:08:34 PM
Hi,
I wanted to send my hash your way but I was wondering if you had X11 settings for rigs in general? I got mostly 270, 270x, 290s.
I wanted to send my hash your way but I was wondering if you had X11 settings for rigs in general? I got mostly 270, 270x, 290s.
Quick Guide for X11:
-Download https://bitcointalk.org/index.php?topic=475795.0;all
-use the same config as your scrypt config
-just put "-k darkcoin" in your config
-you should get about 3x more hash than scrypt
-oc your cards to get more hash (try it out)
Result:
-lower heat
-half of electricity
-so less noise
Thx Pelk
do we need to use sph-sgminer in order to mine x11? can we use another miner like vertminer, sgminer or cgminer? i am mining with pimp os so it would be easier to just mine with the preinstalled miners and just change hte conf file. will any of the preinstalled miners work for this? if yes which one?
when you say to add -k darkcoin to the config file, i dont understand where exactly in the conf file this should go?
my conf file for vert currently looks like this? how should i change it?
,
"auto-fan" : true,
"xintensity" : "4",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "6120",
"shaders" : "1280",
"api-listen" : true,
"api-port" : "4028",
"api-allow" : "W:127.0.0.1",
"gpu-threads" : "1",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-engine" : "1030",
"gpu-memclock" : "1250",
"gpu-powertune" : "20",
"gpu-vddc" : "0.00",
"gpu-fan" : "30-85",
"gpu-threads" : "2",
"temp-hysteresis" : "3",
"temp-cutoff" : "88",
"temp-overheat" : "83",
"temp-target" : "75",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"expiry" : "20",
"scan-time" : "60",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"kernel" : "ckolivas",
"nfactor" : "11"
April 27, 2014, 07:05:01 PM
I would join your pools, and can configure my gpus to do any algo, but NO ONE here will answer my questions.
1)What multi-port is most profitable to mine (scrypt, scrypt-n, or x11)
2)What is the APPROXIMATE btc/mh/day of the 3 multi-pools.
Thank you,
I won't consider moving my farm until someone can post that information either here or on the website,
that is not to much to ask.
1)What multi-port is most profitable to mine (scrypt, scrypt-n, or x11)
2)What is the APPROXIMATE btc/mh/day of the 3 multi-pools.
Thank you,
I won't consider moving my farm until someone can post that information either here or on the website,
that is not to much to ask.
April 27, 2014, 10:44:01 AM
Proud to announce the X11 Multiport - port 4440
Starting with 3 coins: DRK, HIRO, GDN
Present X11 Hashrate: 76mhash, lets go X11'rs
Starting with 3 coins: DRK, HIRO, GDN
Present X11 Hashrate: 76mhash, lets go X11'rs
Awesome work
April 27, 2014, 08:28:05 AM
Hi,
I wanted to send my hash your way but I was wondering if you had X11 settings for rigs in general? I got mostly 270, 270x, 290s.
I wanted to send my hash your way but I was wondering if you had X11 settings for rigs in general? I got mostly 270, 270x, 290s.
Quick Guide for X11:
-Download https://bitcointalk.org/index.php?topic=475795.0;all
-use the same config as your scrypt config
-just put "-k darkcoin" in your config
-you should get about 3x more hash than scrypt
-oc your cards to get more hash (try it out)
Result:
-lower heat
-half of electricity
-so less noise
Thx Pelk
April 27, 2014, 03:11:36 AM
WOW! X11 is cool. Thanks! Neet separate X11 chart in dashboard 
Many altcoins have small difficulty, so with big pool hashpower catch blocks very fast and we/workers have high rate stale/rejects/restart:
Therefore repeat my question in previous page https://bitcointalksearch.org/topic/m.6311958
Many altcoins have small difficulty, so with big pool hashpower catch blocks very fast and we/workers have high rate stale/rejects/restart:
Code:
[11:27:39] Accepted 629812a7 Diff -0.000/-0.000 GPU 0 at Pool 0
[11:27:42] Accepted 322426cf Diff -0.000/-0.000 GPU 1 at Pool 0
[11:27:44] Pool 0 difficulty changed to 0.020
[11:27:44] Network diff set to 22
[11:27:44] Stratum from Pool 0 detected new block
[11:27:54] Accepted 211ece1a Diff -0.000/-0.000 GPU 0 at Pool 0
[11:27:55] Accepted 242377c8 Diff -0.000/-0.000 GPU 0 at Pool 0
[11:27:56] Network diff set to 22
[11:27:56] Stratum from Pool 0 detected new block
[11:28:17] Accepted 0ba21bfc Diff -0.000/-0.000 GPU 0 at Pool 0
[11:28:46] Network diff set to 24
[11:28:46] Stratum from Pool 0 detected new block
Therefore repeat my question in previous page https://bitcointalksearch.org/topic/m.6311958
April 27, 2014, 01:25:38 AM
Hi,
I wanted to send my hash your way but I was wondering if you had X11 settings for rigs in general? I got mostly 270, 270x, 290s.
I wanted to send my hash your way but I was wondering if you had X11 settings for rigs in general? I got mostly 270, 270x, 290s.
April 27, 2014, 12:31:47 AM
Proud to announce the X11 Multiport - port 4440
Starting with 3 coins: DRK, HIRO, GDN
Present X11 Hashrate: 76mhash, lets go X11'rs
Starting with 3 coins: DRK, HIRO, GDN
Present X11 Hashrate: 76mhash, lets go X11'rs
Jump to: