You have to remember the time difference.
They will ship within 48 hours (2 days from Beijing time). If you ordered it yesterday, most likely your order will be send tomorrow as I am in the same boat... Worst case it will be sent on Saturday buy after so many orders there are yet to fail to ship my order after 48 hours...
Patience you must have my young padawan
Topic: Announcement: Bitmain launches AntMiner solution, 0.68 J/GH on chip - page 79. (Read 368350 times)
March 13, 2014, 11:14:02 AM
March 13, 2014, 09:43:24 AM
How long does it take to ship? I ordered 2 yesterday (12th NA) and promptly paid but it's still sitting as unshipped and I can no longer edit the order...wanted put ship UPS after reading the posts above about DHL. thanks
Order ID
001201403121705042507hkCj2wt06BA
Status
Paid
Unshipped
Valid
Create Time
2014-03-12 17:05:04.0
tx -645de1a27b45cd081461eed0077713e535c5a4c07500cac4f21cc03c061530a9
Order ID
001201403121705042507hkCj2wt06BA
Status
Paid
Unshipped
Valid
Create Time
2014-03-12 17:05:04.0
tx -645de1a27b45cd081461eed0077713e535c5a4c07500cac4f21cc03c061530a9
March 13, 2014, 04:58:22 AM
Well I paid £90 with UPS per miner and I am paying £65 with DHL however DHL is sllloooooow.
Also I was bit disappointed that the Bitmain is shipping us used miners but considering it is cheap and I can receive it within days and they do have an OK customer service that actually reply back to you it makes it OK. I really hope they will ship brand new Antminer S2 rather mine with it for weeks (or even mining now considering they are selling the old machines) and ship us the used miners.
It seems to be a industry wide problem that manufacturers mine with the machines for weeks and then ship the miners. This is far worse with pre-orders.
Also I was bit disappointed that the Bitmain is shipping us used miners but considering it is cheap and I can receive it within days and they do have an OK customer service that actually reply back to you it makes it OK. I really hope they will ship brand new Antminer S2 rather mine with it for weeks (or even mining now considering they are selling the old machines) and ship us the used miners.
It seems to be a industry wide problem that manufacturers mine with the machines for weeks and then ship the miners. This is far worse with pre-orders.
It's not a problem if they deliver on time. The only reason so called "pre-mining" is a problem is when manufactures fraudulently advertise and early delivery date and then delay the delivery date in order to charge a higher price and still use the equipment to mine for their own account.
Pretty much that is the biggest problem... At least people mining with GPUs (Scrypt) get a brand new GPU and you will breaking it's cheery... Only way to solve this problem is start buying chips and put the boards together yourself...
March 13, 2014, 04:53:16 AM
Well I paid £90 with UPS per miner and I am paying £65 with DHL however DHL is sllloooooow.
Also I was bit disappointed that the Bitmain is shipping us used miners but considering it is cheap and I can receive it within days and they do have an OK customer service that actually reply back to you it makes it OK. I really hope they will ship brand new Antminer S2 rather mine with it for weeks (or even mining now considering they are selling the old machines) and ship us the used miners.
It seems to be a industry wide problem that manufacturers mine with the machines for weeks and then ship the miners. This is far worse with pre-orders.
Also I was bit disappointed that the Bitmain is shipping us used miners but considering it is cheap and I can receive it within days and they do have an OK customer service that actually reply back to you it makes it OK. I really hope they will ship brand new Antminer S2 rather mine with it for weeks (or even mining now considering they are selling the old machines) and ship us the used miners.
It seems to be a industry wide problem that manufacturers mine with the machines for weeks and then ship the miners. This is far worse with pre-orders.
It's not a problem if they deliver on time. The only reason so called "pre-mining" is a problem is when manufactures fraudulently advertise and early delivery date and then delay the delivery date in order to charge a higher price and still use the equipment to mine for their own account.
March 13, 2014, 04:32:52 AM
Well I paid £90 with UPS per miner and I am paying £65 with DHL however DHL is sllloooooow.
Also I was bit disappointed that the Bitmain is shipping us used miners but considering it is cheap and I can receive it within days and they do have an OK customer service that actually reply back to you it makes it OK. I really hope they will ship brand new Antminer S2 rather mine with it for weeks (or even mining now considering they are selling the old machines) and ship us the used miners.
It seems to be a industry wide problem that manufacturers mine with the machines for weeks and then ship the miners. This is far worse with pre-orders.
Also I was bit disappointed that the Bitmain is shipping us used miners but considering it is cheap and I can receive it within days and they do have an OK customer service that actually reply back to you it makes it OK. I really hope they will ship brand new Antminer S2 rather mine with it for weeks (or even mining now considering they are selling the old machines) and ship us the used miners.
It seems to be a industry wide problem that manufacturers mine with the machines for weeks and then ship the miners. This is far worse with pre-orders.
March 13, 2014, 04:04:55 AM
Dhl suxx.....
Really. I had a lot of problems too..
Ups fine
Really. I had a lot of problems too..
Ups fine
March 13, 2014, 03:37:25 AM
Guys, if you are ordering now, ask them to send it via UPS, cause i had 3 orders with ups, and i payd for each around 50 $ Custom taxes, now they shipped with DHL, and they ask me almost 1 bitcoin for 3 units.
March 13, 2014, 02:52:56 AM
...
I had already cleaned it, plugged it in and mining on it even before I posted this message. That's no big deal, just that it was supposed to be new. Also it may be a sign of things to come. If they are starting to ship out their running pieces they may be running all out with no new pieces in production. That could also mean the S2 may be closer.
Actually that could even mean the S2 is already working.I had already cleaned it, plugged it in and mining on it even before I posted this message. That's no big deal, just that it was supposed to be new. Also it may be a sign of things to come. If they are starting to ship out their running pieces they may be running all out with no new pieces in production. That could also mean the S2 may be closer.
If they have a farm of S1s, it wouldn't make much sense to switch any off (and ship them to customers) until they could replaced them with the new S2's
.
.
.
Though, I'd certainly expect a discount if I got a used one ...
Yes they should actually say on the site if they are selling used ones ... and they should be for cheaper ...
They are selling them cheaper everyday.
And yes it is true, they are/were using them to mine before they sold it to us.
The question is: Do we really care?
We get miners delivered to us 3 days from order.
They work exactly as advertised.
I know they have been using my miners from before, but I have them here NOW
+1
Sure....
Plus sending miners that were mining before doesn't increase the overall hash rate
No comment...
Sure again.... 
March 13, 2014, 02:52:03 AM
...
I had already cleaned it, plugged it in and mining on it even before I posted this message. That's no big deal, just that it was supposed to be new. Also it may be a sign of things to come. If they are starting to ship out their running pieces they may be running all out with no new pieces in production. That could also mean the S2 may be closer.
Actually that could even mean the S2 is already working.I had already cleaned it, plugged it in and mining on it even before I posted this message. That's no big deal, just that it was supposed to be new. Also it may be a sign of things to come. If they are starting to ship out their running pieces they may be running all out with no new pieces in production. That could also mean the S2 may be closer.
If they have a farm of S1s, it wouldn't make much sense to switch any off (and ship them to customers) until they could replaced them with the new S2's
.
.
.
Though, I'd certainly expect a discount if I got a used one ...
Yes they should actually say on the site if they are selling used ones ... and they should be for cheaper ...
They are selling them cheaper everyday.
And yes it is true, they are/were using them to mine before they sold it to us.
The question is: Do we really care?
We get miners delivered to us 3 days from order.
They work exactly as advertised.
I know they have been using my miners from before, but I have them here NOW
+1
Sure....
Plus sending miners that were mining before doesn't increase the overall hash rate
March 13, 2014, 02:48:51 AM
...
I had already cleaned it, plugged it in and mining on it even before I posted this message. That's no big deal, just that it was supposed to be new. Also it may be a sign of things to come. If they are starting to ship out their running pieces they may be running all out with no new pieces in production. That could also mean the S2 may be closer.
Actually that could even mean the S2 is already working.I had already cleaned it, plugged it in and mining on it even before I posted this message. That's no big deal, just that it was supposed to be new. Also it may be a sign of things to come. If they are starting to ship out their running pieces they may be running all out with no new pieces in production. That could also mean the S2 may be closer.
If they have a farm of S1s, it wouldn't make much sense to switch any off (and ship them to customers) until they could replaced them with the new S2's
.
.
.
Though, I'd certainly expect a discount if I got a used one ...
Yes they should actually say on the site if they are selling used ones ... and they should be for cheaper ...
They are selling them cheaper everyday.
And yes it is true, they are/were using them to mine before they sold it to us.
The question is: Do we really care?
We get miners delivered to us 3 days from order.
They work exactly as advertised.
I know they have been using my miners from before, but I have them here NOW
+1
Sure....
March 12, 2014, 04:38:47 PM
...
I had already cleaned it, plugged it in and mining on it even before I posted this message. That's no big deal, just that it was supposed to be new. Also it may be a sign of things to come. If they are starting to ship out their running pieces they may be running all out with no new pieces in production. That could also mean the S2 may be closer.
Actually that could even mean the S2 is already working.I had already cleaned it, plugged it in and mining on it even before I posted this message. That's no big deal, just that it was supposed to be new. Also it may be a sign of things to come. If they are starting to ship out their running pieces they may be running all out with no new pieces in production. That could also mean the S2 may be closer.
If they have a farm of S1s, it wouldn't make much sense to switch any off (and ship them to customers) until they could replaced them with the new S2's
.
.
.
Though, I'd certainly expect a discount if I got a used one ...
Yes they should actually say on the site if they are selling used ones ... and they should be for cheaper ...
They are selling them cheaper everyday.
And yes it is true, they are/were using them to mine before they sold it to us.
The question is: Do we really care?
We get miners delivered to us 3 days from order.
They work exactly as advertised.
I know they have been using my miners from before, but I have them here NOW
March 12, 2014, 04:11:07 PM
...
I had already cleaned it, plugged it in and mining on it even before I posted this message. That's no big deal, just that it was supposed to be new. Also it may be a sign of things to come. If they are starting to ship out their running pieces they may be running all out with no new pieces in production. That could also mean the S2 may be closer.
Actually that could even mean the S2 is already working.I had already cleaned it, plugged it in and mining on it even before I posted this message. That's no big deal, just that it was supposed to be new. Also it may be a sign of things to come. If they are starting to ship out their running pieces they may be running all out with no new pieces in production. That could also mean the S2 may be closer.
If they have a farm of S1s, it wouldn't make much sense to switch any off (and ship them to customers) until they could replaced them with the new S2's
.
.
.
Though, I'd certainly expect a discount if I got a used one ...
Yes they should actually say on the site if they are selling used ones ... and they should be for cheaper ...
March 12, 2014, 03:25:19 PM
I had already cleaned it, plugged it in and mining on it even before I posted this message. That's no big deal, just that it was supposed to be new. Also it may be a sign of things to come. If they are starting to ship out their running pieces they may be running all out with no new pieces in production. That could also mean the S2 may be closer.
This has been reported for months, so its not really a sign of anything new.
March 12, 2014, 03:12:34 PM
I paid the entire amount, but my order is marked as not paid.
https://blockchain.info/tx/b21016f7b4c7f3cb9ea1f6199cbfb9b74b7f238fcefdd9782038ea4dbc00afa3
order id 00120140312185138820P8hh7md50687
https://blockchain.info/tx/b21016f7b4c7f3cb9ea1f6199cbfb9b74b7f238fcefdd9782038ea4dbc00afa3
order id 00120140312185138820P8hh7md50687
March 12, 2014, 02:41:28 PM
I just received another S1 today and this one was used big time. Lots of Chinese dust all over the PCB boards and fan blades. Should I contact them and have them replace it?
Your choice, of course, but if it works I'd say use it. You'd lose a significant amount of income by being without a unit for the 1 or 2 week turnaround, plus paying for shipping to Bitmain. You'd need to mine for many weeks to recover that, and you'd never catch up to what you could have mined by keeping it.'chinese dust'? Why would you RMA something because it is dusty? get out the compressed air and clean it yourself in a few minutes. You can use 99% isopropyl (rubbing) alcohol and a microfiber cloth to clean the pcb if the air duster isnt enough
Probably he meant that it supposed to be brand new device. Not used one, covered with dust, they've been mining on it for months and it's life may be shorter now.
The S2 is expected early April from what I have heard....
March 12, 2014, 02:18:59 PM
I just received another S1 today and this one was used big time. Lots of Chinese dust all over the PCB boards and fan blades. Should I contact them and have them replace it?
Your choice, of course, but if it works I'd say use it. You'd lose a significant amount of income by being without a unit for the 1 or 2 week turnaround, plus paying for shipping to Bitmain. You'd need to mine for many weeks to recover that, and you'd never catch up to what you could have mined by keeping it.'chinese dust'? Why would you RMA something because it is dusty? get out the compressed air and clean it yourself in a few minutes. You can use 99% isopropyl (rubbing) alcohol and a microfiber cloth to clean the pcb if the air duster isnt enough
Probably he meant that it supposed to be brand new device. Not used one, covered with dust, they've been mining on it for months and it's life may be shorter now.
March 12, 2014, 02:06:41 PM
I just received another S1 today and this one was used big time. Lots of Chinese dust all over the PCB boards and fan blades. Should I contact them and have them replace it?
Your choice, of course, but if it works I'd say use it. You'd lose a significant amount of income by being without a unit for the 1 or 2 week turnaround, plus paying for shipping to Bitmain. You'd need to mine for many weeks to recover that, and you'd never catch up to what you could have mined by keeping it.'chinese dust'? Why would you RMA something because it is dusty? get out the compressed air and clean it yourself in a few minutes. You can use 99% isopropyl (rubbing) alcohol and a microfiber cloth to clean the pcb if the air duster isnt enough
Probably he meant that it supposed to be brand new device. Not used one, covered with dust, they've been mining on it for months and it's life may be shorter now.
March 12, 2014, 02:01:27 PM
I just received another S1 today and this one was used big time. Lots of Chinese dust all over the PCB boards and fan blades. Should I contact them and have them replace it?
Your choice, of course, but if it works I'd say use it. You'd lose a significant amount of income by being without a unit for the 1 or 2 week turnaround, plus paying for shipping to Bitmain. You'd need to mine for many weeks to recover that, and you'd never catch up to what you could have mined by keeping it.'chinese dust'? Why would you RMA something because it is dusty? get out the compressed air and clean it yourself in a few minutes. You can use 99% isopropyl (rubbing) alcohol and a microfiber cloth to clean the pcb if the air duster isnt enough
March 12, 2014, 01:58:58 PM
My fan is going full blast even when going from a cold start. How do I fix this? My other miner's fan runs much quieter.
How do I fix this? I checked the connection and it seems that all cables are properly set in the connector end (but not entirely sure). I pushed the fan cables into the connector to see if that'd help but it didn't
Please let me know! Thx
How do I fix this? I checked the connection and it seems that all cables are properly set in the connector end (but not entirely sure). I pushed the fan cables into the connector to see if that'd help but it didn't
Please let me know! Thx
Check if the blue wire is properly connected.
If it is, don't worry about it, it could have been worse, like the fan not working AT ALL!!!
March 12, 2014, 01:40:45 PM
I just received another S1 today and this one was used big time. Lots of Chinese dust all over the PCB boards and fan blades. Should I contact them and have them replace it?
Your choice, of course, but if it works I'd say use it. You'd lose a significant amount of income by being without a unit for the 1 or 2 week turnaround, plus paying for shipping to Bitmain. You'd need to mine for many weeks to recover that, and you'd never catch up to what you could have mined by keeping it.On a different note, is there any setting between 350 and 375? I don't overclock but want a tiny bit more juice out of these things. Like 360?
Jump to: