[ANN][PHS][50% PoS] PhilosopherStone | NoPremine |10 month Dist | 1.6.4.1 - page 39.

Palmdetroit

legendary

Activity: 910

Merit: 1000

PHS 50% PoS - Stop mining start minting

Quote from: krostue on April 08, 2014, 11:07:26 PM

Please make sure you update coinex.pw with the upgrade? I am sure they are busy, but coming from you, they might move it up a bit.

I got a PM that txs withdrawal with coinex are working fine and have been, did you have any issue? I was waiting to hear form them if they did the update.

If anyone can confirm with pm or post , would be helpfull, thanks

Palmdetroit

legendary

Activity: 910

Merit: 1000

PHS 50% PoS - Stop mining start minting

Quote from: Xenopus on April 09, 2014, 10:19:14 PM

Hi Palmdetroit,

I've updated to 1.4.1 and re-synched, but I'm now missing about 455 PHS that were sitting in stake before I updated. I thought they would have either stayed in stake or else relocated to my regular wallet balance, but they just...disappeared.

Is that an example of orphaned stakes that will reappear later? I can post a screenshot if that helps.

Hello, glad you survived the resync.

You are right, Expected behavior under normal circumstances is the amount in stake will stay there for confirmations then return to balance. If you were on a fork or had an orphan than this will not be calculated into balance (i.e. disappear) when back on the main chain, since according to main chain it never happened.

You can let the wallet run to see if it re-stakes for a bit.

If your worried can also try checkwallet in the debug console (in dusty wallets client may appear to lock up for a bit, just leave it run).

Muzzargh

member

Activity: 133

Merit: 10

After about 4 hours it was down to 220 blocks to go now it hovers around 500 -1300 to go. It is up to 99.74% and the last block was 3 seconds ago, blocks were 195590. Also 42% of my stones are missing Huh

What to do?

Edit: I started the process about 22 hours ago.

Xenopus

full member

Activity: 137

Merit: 100

Hi Palmdetroit,

I've updated to 1.4.1 and re-synched, but I'm now missing about 455 PHS that were sitting in stake before I updated. I thought they would have either stayed in stake or else relocated to my regular wallet balance, but they just...disappeared.

Is that an example of orphaned stakes that will reappear later? I can post a screenshot if that helps.

Palmdetroit

legendary

Activity: 910

Merit: 1000

PHS 50% PoS - Stop mining start minting

Quote from: wishfulthinker on April 09, 2014, 05:40:37 PM

I haven't been able to withdraw my PHS from cryptsy, anyone else still having trouble?

"An Internal Error Has Occurred.

Error: An Internal Error Has Occurred."

Cryptsy did this before( 1 week ago), but then i tried it a few more times and it finally worked. But now it isn't letting me withdraw no matter how many times i try.

hi,

waiting on the explorers to update and will contact them then, speaking of which, anyone know how to contact

http://altexplorer.info/chains/PHS/block_crawler.php

? Can't seem to find any direct way.

sent msg!

Palmdetroit

legendary

Activity: 910

Merit: 1000

PHS 50% PoS - Stop mining start minting

Quote from: vashshawn on April 09, 2014, 04:55:59 PM

do I still need stoned.exe in my folder after upgrading to 1.4.1?

Unless you want to use it no, It's not being released anymore since the client can unlock in QT now (see beginning of thread), you can build a new one if you so choose.
(running an older one after upgrading is bad since they use different dbs)

wishfulthinker

newbie

Activity: 17

Merit: 0

I haven't been able to withdraw my PHS from cryptsy, anyone else still having trouble?

"An Internal Error Has Occurred.

Error: An Internal Error Has Occurred."

Cryptsy did this before( 1 week ago), but then i tried it a few more times and it finally worked. But now it isn't letting me withdraw no matter how many times i try.

vashshawn

sr. member

Activity: 530

Merit: 253

LDOGE aka Litedoge -stakeable 2.0 doge

do I still need stoned.exe in my folder after upgrading to 1.4.1?

scryptographer

full member

Activity: 143

Merit: 100

Quote from: Palmdetroit on April 08, 2014, 08:19:54 PM

After halving client update 1.4.1

To see if you are on forked chain please check bottom right for what block you are on (constant syncing icon is also possible)
and compare current block with these sites, should be same or close.

http://phstones.com/mobile.php
http://phs.minar.cc/index.php?page=statistics

If you are on 1.4.0, Grab the new 1.4.1 client and run it, you may get an error, if so then you will need a new sync (see below)
If you are on lower version than 1.4.0 then you will need to follow below regardless.

Warning This new sync can take quite some time!, go grab dinner or lunch, maybe both

Code:

1. Stop current Qt Client or stoned.exe and wait 1 minute to fully close.
2. Back up wallet.dat
Windows c:/users/username/appdata/roaming/philosopherstone/
Unix : /home/user/.Philosopherstone
3. Delete all files in your directory above EXCEPT wallet.dat and philosopherstone.conf (if you have one)
4. Unzip 1.4.1 to where you would like and run QT file, and run it
5. You must re-sync which will take 1-12 hours depending on your computer and the network
6. Don't unlock wallet until you seen green check-mark bottom right.
7. When done you are re-synced and on new client!
8. (Check help>about Philosopherstone to verify version 1.4.1)

FYI: Oprhan stakes will restake later and at a higher amount.

Any problems you can PM me or post.

Download
windows 32
http://sourceforge.net/projects/philosopherstone/files/PHS/Philosopherstone-1.4.1-win32.zip/download
Philosopherstone-1.4.1-win32.zip 9511144688FA8F4A34A7262A30211DDC

source
https://github.com/philosopherstonecoin/philosopherstone

Full blockchain available for download from http://cryptotrade.rs/phs/PHSchain_20140409.zip
Blockheight 197,933
Client version 1.4.1.0
Verified blockheight/difficulty matched that of phsstones.com and phs.minar.cc

psybits

legendary

Activity: 1386

Merit: 1000

Thanks for all your hard work dev, blockchain appears to be downloading nicely

paardenkip

member

Activity: 79

Merit: 10

You can type "repairwallet" in console when the number of coins isn't right after redownloading blocks.

tokyoghetto

legendary

Activity: 1232

Merit: 1000

Keep up the good work Palmdetroit.

Muzzargh

member

Activity: 133

Merit: 10

Synching now, 187, 000 blocks to go [sigh] Grin

wishfulthinker

newbie

Activity: 17

Merit: 0

Hello all

I am new to Proof of stake coins and PHS seems to be the way to go, very nice coin.

My question is as follows: I bought a few PHS a while back and they are staking now. I just now bought more coins and i am wondering, if i transfer them into my wallet right now, will this in anyway delay my staking? I doubt it will, but i thought i would ask to make sure, because i read somewhere that someone suggested to only send it 100 or 500 coins at a time into the wallet, is there a reason for that?

Thanks in advance.

solarion

hero member

Activity: 966

Merit: 513

Cryptsy has been goofing off with my phs withdrawal for almost two days now. Support's response can be summed up as "cryptos is hard". Undecided

mxn

newbie

Activity: 59

Merit: 0

Hi philosophers,

good work & nice to see an old PoS coin running for a while, if you remove PoW fully +1 for this plan.

Here is how i installed & run the wallet in Debian/Ubuntu by compiling via terminal:

Code:

sudo apt-get install git build-essential qt4-qmake libqt4-dev libboost-dev libboost-system-dev libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev libssl-dev libdb5.1++-dev libminiupnpc-dev

git clone https://github.com/philosopherstonecoin/philosopherstone.git

cd philosopherstone

qmake

make

./philosopherstone-qt

Edit: if you run in an error at "qmake" try "qmake-qt4" on certain Ubuntu versions (sorry i cannot say why).

krostue

full member

Activity: 187

Merit: 120

post history is my own and doesn't represent other

I am surely paying the dev account PHS again, as soon as i can get this chain downloaded.
Please make sure you update coinex.pw with the upgrade? I am sure they are busy, but coming from you, they might move it up a bit.
Oh, and PM to you, Palmdetroit
Grin

ARE ALL THE POOLS UPDATED? ... wait. Are there only two?

solarion

hero member

Activity: 966

Merit: 513

Seems to be working fine. Yer the best stewie!

We'll see tomorrow when some of my coins hit min stake age.

Palmdetroit

legendary

Activity: 910

Merit: 1000

PHS 50% PoS - Stop mining start minting

After halving client update 1.4.1

To see if you are on forked chain please check bottom right for what block you are on (constant syncing icon is also possible)
and compare current block with these sites, should be same or close.

http://phstones.com/mobile.php
http://phs.minar.cc/index.php?page=statistics

If you are on 1.4.0, Grab the new 1.4.1 client and run it, you may get an error, if so then you will need a new sync (see below)
If you are on lower version than 1.4.0 then you will need to follow below regardless.

Warning This new sync can take quite some time!, go grab dinner or lunch, maybe both

Code:

1. Stop current Qt Client or stoned.exe and wait 1 minute to fully close.
2. Back up wallet.dat
Windows c:/users/username/appdata/roaming/philosopherstone/
Unix : /home/user/.Philosopherstone
3. Delete all files in your directory above EXCEPT wallet.dat and philosopherstone.conf (if you have one)
4. Unzip 1.4.1 to where you would like and run QT file, and run it
5. You must re-sync which will take 1-12 hours depending on your computer and the network
6. Don't unlock wallet until you seen green check-mark bottom right.
7. When done you are re-synced and on new client!
8. (Check help>about Philosopherstone to verify version 1.4.1)

FYI: Oprhan stakes will restake later and at a higher amount.

Balance mismatch after sync? help>debug>console then type this command:
checkwallet
if error or problem then run
repairwallet

(this can take a long time on dusty wallets and client my appear to lock, just let it run, can check debug log for updates as it progresses)

Download
windows 32
http://sourceforge.net/projects/philosopherstone/files/PHS/Philosopherstone-1.4.1-win32.zip/download
Philosopherstone-1.4.1-win32.zip 9511144688FA8F4A34A7262A30211DDC

source
https://github.com/philosopherstonecoin/philosopherstone

psybits

legendary

Activity: 1386

Merit: 1000

Quote from: therealbigcoin on April 08, 2014, 09:33:29 AM

Quote from: psybits on April 08, 2014, 05:46:35 AM

My client won't sync either ... I've been trying for days Sad

I'm looking to invest big in PHS but looks like there has been a fork and other issues.

Please let us all know dev when you have fixed this Wink

i dont know why everyone is crying, for me everything worked any time (maybe short delays )
but remmember:

Just one Dev !
Noone supporting the Dev, he is still working
there was no premine and a verry fair distribution
prices a relatively stable since launch
no Pum n Dumps
verry good interest rate
verry old coin (early start)
aaaaand such a little community but people are still interested.

So give the Dev some time or send him some money so he can work full time on this and pls stop crying, this is no scam this is real

Thanks for reading Wink

I was just letting the dev know I'm experiencing the problem too... but I agree I really like PHS Wink

Topic: [ANN][PHS][50% PoS] PhilosopherStone | NoPremine |10 month Dist | 1.6.4.1 - page 39. (Read 121936 times)