Pages:
Author

Topic: [ANN][POOL] HASH-TO-COINS - page 4. (Read 53740 times)

member
Activity: 117
Merit: 10
PC repair master, engeneer, radioamateur
March 13, 2018, 06:46:30 PM
and now you are killing
LINDA   1076.53   3.8 Gh/s   6.2 Gh/s   11m 37s   4806%   1.969%   0.0344
member
Activity: 117
Merit: 10
PC repair master, engeneer, radioamateur
March 13, 2018, 06:22:59 PM
hi dear hash-to-coins.com pool administration
I want to tell you about such danger position of this pool for some cryptos  Angry
in 14.03.2018 3:00 GMT+4 EMD network diff droped to 1 and in about 2 minute it shows ~200% profitability after that in 3:05 all your pool autoconfigured workers fly to EMD and pool hashrate goes from 10-20MH to 680+MH/s the network was ~320 at the same time! In 3:00 Net diff was 230! So you excced net sppeed 3x! So this short time can do the fork and kill that coin! Please think about this and make some work for that, for example if net hash is low do not allow many workers switch to that coin. Thanks.
14.03.2018 3:10 GMT+4

2.3   319.5 Mh/s   685.1 Mh/s   15s   95%   53%   0.0009

And not only that coin, your pool workers 100 times a day is switching from one coin to another, every 5-20 minutes, you must do something with this, or not allow all workers to switch to 5-20 minutes to the coin which network speed is low, or turn off autoswitch for nearly died coins, or you can do something better??
 So looking in your news we can consider that your pool soon will kill and EMD and other cryptos like you did that before!

Feb 3, 2018 at 11:41
Casinocoin CSC goes to blockchain swap on Feb 14.
___________________
Jan 24, 2018 at 15:44
LINX Linx down for maintenance
___________________
Jan 23, 2018 at 09:32
XVG Verge down for maintenance before hardfork
___________________
Jan 3, 2018 at 06:56
This coins will be delisted at 01/07/2018

ADCN AsiaDigiCoin - coin swapped to ether blockchain
FRN Francs - constantly forked dead coin
SCORE Scorecoin - coin creators ask to remove because coin swapped to the new blockchain (withdraw coins to Swap Engine before 01/05/2017)
TRADE2 Tradecoin - coin creators ask to remove because coin swapped to the new blockchain
newbie
Activity: 17
Merit: 0
March 10, 2018, 05:15:24 PM
All the gamecredits  previously obtained were lost from the balance from pool wallet after resync gamecredits wallet after hardfork.  There are 191,67  gamecredits on my pool wallet (with status confirmed) but tooday i see status orphaned Please please refund if your pool not a scam.  
screenshot of my wallet with status confirmed.  https://drive.google.com/open?id=1BGMP8vzH1r30J2SIhT4O5G9EJ7r3uf5i

https://drive.google.com/open?id=1hYWXW6wv6-fad1kWSy9SNm26Zp24Vb8d today i see that status for all the gamecredits  previously obtained with status confirmed changed to orphaned.



sr. member
Activity: 404
Merit: 251
March 03, 2018, 03:21:44 PM
Can anyone tell me how long it takes for the worker to show on the website as active?
My L3+ is connected and im trying to mine Linda.
No workers are showing on my worker page and no Hash rate on the home page in green above the coin list

Thanks

Looks like pool is down for now.
Very bad pool for asicminer and very complicated
No help and don't have information or etc.
Same is scam pool, stay away..
hero member
Activity: 1176
Merit: 501
January 30, 2018, 08:46:15 AM
Hello !

What is AP Threshold   AP limits (min/max) Huh

Thanks

First:
 
 FYU there is a new hash-to-coins pool announce topic here https://bitcointalksearch.org/topic/annpool-hash-to-coins-2-2649729

2nd.  AP means Auto Payout.

You set the auto payout within the limits of min/max

ie:  Dnote:   put in your wallet info first.   (make sure you put in your pin at the bottom)   2/250   i have 100 there.
that means when the balance hits 100, it will Auto payout to the wallet address you have in there.
   (any changes you must put in your pin, and you only have x seconds on the page, or the token times out)
so, go onto page, put in your data, and hit update.  (dont sit there and do 5 at a time, it will time out) lol.

you MIGHT be able to do 2 wallet updates before timeout. 


Like the overall concept. use it alot Smiley
   
newbie
Activity: 8
Merit: 0
January 29, 2018, 04:04:11 PM
Hello !

What is AP Threshold   AP limits (min/max) Huh

Thanks
newbie
Activity: 83
Merit: 0
January 22, 2018, 04:40:11 PM
Tried setting up an acct and pointed an ASIC miner to it.  Chose XVG / LTC, added addresses, checked autoswitch, disabled other coins.  Shows no activity on the miners page, even though the status page on the miner shows it's connected.  Waited maybe 30 mins and nothing.  The contact page says "Contactform is currently disabled. Please try again later."

Can't support this one, so back to looking for another pool.

check your actual miner status page to see if it is really connected...  Huh
H2C
copper member
Activity: 107
Merit: 5
January 22, 2018, 04:02:46 PM
One of the best scrypt pools i've ever used. No stability issues, really good pool for different coin collecting. The only thing that bothers me is that the current profitability is not always in sync with the profitability of the coins from the sheet on the main page and some coins are never mined, even if enabled in options and wallet address is correct. Anyway, amazing pool, got two crippled L3+ with 2 hashboards each (defective controller board which doesn't recognize hashboards) pointed on this pool. Works like a charm! Thank you.

Hi,

When pool switch workers to the next coins and this coin mark you as excluded, then pool just ignore your worker and it continues to mine current coin.
jr. member
Activity: 75
Merit: 1
January 22, 2018, 03:59:00 PM
Tried setting up an acct and pointed an ASIC miner to it.  Chose XVG / LTC, added addresses, checked autoswitch, disabled other coins.  Shows no activity on the miners page, even though the status page on the miner shows it's connected.  Waited maybe 30 mins and nothing.  The contact page says "Contactform is currently disabled. Please try again later."

Can't support this one, so back to looking for another pool.
H2C
copper member
Activity: 107
Merit: 5
January 22, 2018, 11:37:50 AM
I am having the same issue. 3 days running NLG and no balance. Come on, where's the support for this pool? There's no one single email to use as a contact

Hi,

I will check. FYU there is a new hash-to-coins pool announce topic here https://bitcointalksearch.org/topic/annpool-hash-to-coins-2-2649729
I will check Gulden immediately
newbie
Activity: 2
Merit: 0
January 21, 2018, 08:22:13 AM
Quote
Anyone know what's happening?  Is there a problem with the NLG network, or is there
something with the H2C pool or website?

 EMC2 is working.  It therefor seems to be a problem specific to NLG.  Does anyone know what, maybe?
newbie
Activity: 2
Merit: 0
January 21, 2018, 07:02:52 AM
I'm mining some NLG, and up to 19 januari transactions were regularly coming in.
However, since the 19th no more new transactions show up.

Anyone know what's happening?  Is there a problem with the NLG network, or is there
something with the H2C pool or website?    Huh
newbie
Activity: 50
Merit: 0
January 20, 2018, 11:01:49 AM
Mining Mooncoin with one of the L3+, but the balance doesn't show up even after 2-3 hours of mining, as if it was mining for nothing. Could you please fix that, op ?

Everything was fine till today, other coins are mined properly. Wallet has a correct address, just no balance showing up.

Edit: Everything is fine now, probably just a delay in displaying the balance.
sr. member
Activity: 1078
Merit: 255
January 19, 2018, 10:36:25 AM
Can you make new address?
newbie
Activity: 9
Merit: 0
January 19, 2018, 08:16:30 AM
Hello everyone

I have been mining for a few days linx in this pool but I can not enter my address to cash out, says the address is already used I do not understand what the problem is, I really like this pool for the autoswitch and  multiple cool coins but on the other hand it has these problems  Cry

is saying "Address XYvihTvzvQKAHps9a74cENpFCxd24FMuc is already in use
Fail to update user wallets (missing information to complete string)"


Does anyone have the same problem? Huh
newbie
Activity: 83
Merit: 0
January 12, 2018, 02:22:45 PM
Can anyone tell me how long it takes for the worker to show on the website as active?
My L3+ is connected and im trying to mine Linda.
No workers are showing on my worker page and no Hash rate on the home page in green above the coin list

Thanks

I withdrew some linda last night and it only replenished about 640 with 1ghz

time to go back to nicehash I suppose...

so my workers were probably connected for about 14 hrs , it says they are mining but the linda is looow

hacked ??  Roll Eyes
newbie
Activity: 44
Merit: 0
January 12, 2018, 09:24:01 AM
hi,

i have the worker set at "autoswitching." does that mean that i am mining ALL of the coins in there?

how/where do i get a wallet that can take all those different kind of coins?

sounds like everybody uses antminers? can i use GPU to mine all the coins on H2C?

any profit comparisons?

thanks

GPU mining Scrypt coins is not profitable anymore, everyone uses ASIC hardware now (no, not just Antminers).  If you are interested in a specific coin, mine what is profitable for your GPU elsewhere and exchange whatever that is for the coin you want to hold.
sr. member
Activity: 1078
Merit: 255
January 12, 2018, 05:37:18 AM
Can anyone tell me how long it takes for the worker to show on the website as active?
My L3+ is connected and im trying to mine Linda.
No workers are showing on my worker page and no Hash rate on the home page in green above the coin list

Thanks

Looks like pool is down for now.
newbie
Activity: 2
Merit: 0
January 12, 2018, 04:25:38 AM
hi,

i have the worker set at "autoswitching." does that mean that i am mining ALL of the coins in there?

how/where do i get a wallet that can take all those different kind of coins?

sounds like everybody uses antminers? can i use GPU to mine all the coins on H2C?

any profit comparisons?

thanks
newbie
Activity: 3
Merit: 0
January 12, 2018, 04:19:23 AM
Can anyone tell me how long it takes for the worker to show on the website as active?
My L3+ is connected and im trying to mine Linda.
No workers are showing on my worker page and no Hash rate on the home page in green above the coin list

Thanks
Pages:
Jump to: