Before I could see my money for each round, not now.
Make Current Round Stats for user plz
Topic: [ANN][Pool][Profit-Switch][Optional Auto-Exchange per Coin][Vardiff] ~ Hashcows - page 54. (Read 347332 times)
January 14, 2014, 08:54:22 AM
January 14, 2014, 08:31:09 AM
I use failover pools with cgminer 3.7.2 here without any problem, have 2 backup pools on load-balance.
January 14, 2014, 08:30:35 AM
Would be nice for those of us using pre-built miner platforms such as Minepeon, BAMT, Slax, etc. not to have to downgrade the included version of cgminer to resolve the failover issue. I know middlecoin implemented a server-side solution. Any chance of getting the same here?
better yet, programs like cgminer should have a command-line switch/option to SET the timeout value. i havent looked, but perhaps they do already?
January 14, 2014, 08:22:04 AM
Would be nice for those of us using pre-built miner platforms such as Minepeon, BAMT, Slax, etc. not to have to downgrade the included version of cgminer to resolve the failover issue. I know middlecoin implemented a server-side solution. Any chance of getting the same here?
January 14, 2014, 08:21:17 AM
pool hash is over 3x more than the network hash rate?
or perhaps the network hash rate should be expressed as Gighash ?
(that WOULD be a lot. heh...)
or perhaps they're reversed and the pool is only 540?
January 14, 2014, 08:09:15 AM
RPC seems to take forever verifying blocks.
January 14, 2014, 08:06:13 AM
Funny thing happened - Yesterday I was too lazy to look for reliable 42 pool so I pointed some HR here and set not to autotrade 42. By some strange flaw there is also 1.000334 SBC sitting in on my acc. I am sure that I did not disabled autotrade on SBC not even for a sec. Nevermind, just to let You guys know. Keep up the good (even bit slow) work on site.
We are aware of that glitch should have it fixed up shortly
Also the coin switching for some reason is switching much more than we would like so looking into it.
January 14, 2014, 07:57:30 AM
Funny thing happened - Yesterday I was too lazy to look for reliable 42 pool so I pointed some HR here and set not to autotrade 42. By some strange flaw there is also 1.000334 SBC sitting in on my acc. I am sure that I did not disabled autotrade on SBC not even for a sec. Nevermind, just to let You guys know. Keep up the good (even bit slow) work on site.
January 14, 2014, 07:53:53 AM
Hi
What's the trick for keeping cgminer running on this pool, and not dropping off to the backup pool for 5 min every time we change coin ?
running cgminer 3.7.2, and also tried the kalroth patched version (https://github.com/Kalroth/cgminer-3.7.2-kalroth)
Use Kano's build 3.1.1a (64 bit) What's the trick for keeping cgminer running on this pool, and not dropping off to the backup pool for 5 min every time we change coin ?
running cgminer 3.7.2, and also tried the kalroth patched version (https://github.com/Kalroth/cgminer-3.7.2-kalroth)
works perfectly in ubuntu, it switches to backup for about 5 to 10 seconds and come back fast!
also is rock solid.I know it's an old version but, if it works.... why change it?
January 14, 2014, 04:25:56 AM
Thanks, i'll try, do you how old a version I need to go back to ?
3.5.0 was the last version without the 5 minute delay. It has other nuances, such as not reporting diff correctly, but it''s definitely without the 5 minute delay.
I always thought it was 3.3.1, anyway that's the version I've used since it came out and it runs very well.
Very handy for 'new' coins, you can set the pools up in advance so pool0: new coin pool1: normal coin, the instant it goes live you are mining it
January 14, 2014, 02:57:35 AM
Hi
What's the trick for keeping cgminer running on this pool, and not dropping off to the backup pool for 5 min every time we change coin ?
What's the trick for keeping cgminer running on this pool, and not dropping off to the backup pool for 5 min every time we change coin ?
the easy and safe way:
use an old version of cgminer, the new version has 5 min timeout, where the old has like 30s..
EDIT: i forgot to read you whole post -.-
.. try and old version of cgminer.
Thanks, i'll try, do you how old a version I need to go back to ?
3.5.0 was the last version without the 5 minute delay. It has other nuances, such as not reporting diff correctly, but it''s definitely without the 5 minute delay.
January 14, 2014, 02:54:24 AM
Please add freenode IRC to your website. Im lazy I dont want to get mIRC and configure it to hide my ip etc. freenode is nice and saves time. Brings the community together because its easy point click.
January 14, 2014, 02:17:57 AM
Hi
What's the trick for keeping cgminer running on this pool, and not dropping off to the backup pool for 5 min every time we change coin ?
What's the trick for keeping cgminer running on this pool, and not dropping off to the backup pool for 5 min every time we change coin ?
the easy and safe way:
use an old version of cgminer, the new version has 5 min timeout, where the old has like 30s..
EDIT: i forgot to read you whole post -.-
.. try and old version of cgminer.
Thanks, i'll try, do you how old a version I need to go back to ?
January 14, 2014, 02:10:52 AM
Hi
What's the trick for keeping cgminer running on this pool, and not dropping off to the backup pool for 5 min every time we change coin ?
What's the trick for keeping cgminer running on this pool, and not dropping off to the backup pool for 5 min every time we change coin ?
the easy and safe way:
use an old version of cgminer, the new version has 5 min timeout, where the old has like 30s..
EDIT: i forgot to read you whole post -.-
.. try and old version of cgminer.
January 14, 2014, 02:03:22 AM
Hi
What's the trick for keeping cgminer running on this pool, and not dropping off to the backup pool for 5 min every time we change coin ?
running cgminer 3.7.2, and also tried the kalroth patched version (https://github.com/Kalroth/cgminer-3.7.2-kalroth)
What's the trick for keeping cgminer running on this pool, and not dropping off to the backup pool for 5 min every time we change coin ?
running cgminer 3.7.2, and also tried the kalroth patched version (https://github.com/Kalroth/cgminer-3.7.2-kalroth)
January 14, 2014, 12:36:00 AM
Payout's were sent out. Please note that one of our 6+ hour rounds didn't get matured in time for payout. So really the payout is for about 18 hours of mining Will add that round to tomorrows payout.
Will add that round to tomorrows payout. January 13, 2014, 11:59:03 PM
I am hoping we get a healthy bump in our Confirmed Exchanged Balance total before payouts.... 
edit: Very reasonable payout for 18 hours. Thank you for the explanation.
edit: Very reasonable payout for 18 hours. Thank you for the explanation.
January 13, 2014, 11:33:41 PM
Payouts slightly delayed.
January 13, 2014, 10:32:13 PM
Hello.
My 'Est. Unexchanged Balance' value is always zero during more than 20 hours with ~13 MHash/s. 'Confirmed Exchanged' value is changing. Are you still fixing that values?
My username is the same at the pool.
My 'Est. Unexchanged Balance' value is always zero during more than 20 hours with ~13 MHash/s. 'Confirmed Exchanged' value is changing. Are you still fixing that values?
My username is the same at the pool.
January 13, 2014, 10:31:08 PM
noob question
Why confirm exchanged does not transfer to current balance so I can cash it out?
Why confirm exchanged does not transfer to current balance so I can cash it out?
Jump to: