It is with sadness that i announce that we will be delisting quarkbars from CryptoALTeX.
We have not seen a trade in weeks nor much interest at this time for this coin. We will keep an eye on this coin and will consider relisting if volume/interest picks up.
If you have coins on CryptoALTeX please withdraw those coins before Friday. On Friday I will be turning off the daemon and will only turn it on every Friday after until all coins are claimed. I will also send an email to all users that have trades or balances in our quarkbar markets.
Thanks all,
Chiznitz
Topic: [ANN][QB]QuarkBar - 7GHS - Giveaway - Now on exchange - page 5. (Read 73015 times)
We need some users to test this one. You can grab the sources @ https://github.com/QuarkBar/newQuarkBar.git
Please do not put it into production use yet, use the testnet instead.
Please do not put it into production use yet, use the testnet instead.
Can you explain to a noob like me, what you need me to do?
Try the following:
Start the client in testnet mode:
Code:
quarkbar-qt -testnet
Now start mining some coins. It should work. If you see errors then I fucked up.
Any update on the new wallet?
This is an old thread! The new one can be found here
Wallet can't sync.
Anyone else got any nodes other than those listed in OP?
Anyone else got any nodes other than those listed in OP?
Any update on this coin?
Too bad I cant withdraw.
In the mean time cryptoaltex seems like a scam.
In the mean time cryptoaltex seems like a scam.
I hope you don't write like this on your blog. Would really feel sorry for your readers.
-tb-
That being said, I am considering delisting QB from CryptoALTeX, we haven't made a sale since March 23rd and there are very few orders. I'm assuming you are using one of the other exchanges and that, that exchange is providing a good service and therefore having it on our Exchange is bringing no value for the coin.
I like QB but unless we start to see some real volume we will ask all to withdraw coins and halt trading.
Rest assured if you have coins there we will make sure you get to withdraw them before it goes offline.
I like QB but unless we start to see some real volume we will ask all to withdraw coins and halt trading.
Rest assured if you have coins there we will make sure you get to withdraw them before it goes offline.
Too bad I cant withdraw.
In the mean time cryptoaltex seems like a scam.
In the mean time cryptoaltex seems like a scam.
Why would you make false accusations? Why are you saying this? Do you have an issue? Have you entered a ticket?
I'm pretty sure the people who have actually used the exchange have no issues with us and if they did have an issue, I'm positive that if they entered a ticket it was answered within a few hours if not sooner.
What do you need help with?
A possible fix might be to change the file src/version.h as such:
static const int PROTOCOL_VERSION = 70001;
static const int MIN_PROTO_VERSION = 209;
I cannot test it (@work currently). Can someone else step in please?
static const int PROTOCOL_VERSION = 70001;
static const int MIN_PROTO_VERSION = 209;
I cannot test it (@work currently). Can someone else step in please?
I just tried it but unfortunately was met with the same result I'm afraid
I just compiled the headless server using 'makefile-unix' in the 'src' folder,
everything compiled with no errors but for some reason I can't get the executable to run.
'./quarkbard' and './quarkbard -testnet' both return 'bash: ./quarkbard: No such file or directory' which is strange because the quarkbard program is 60M in size and clearly exists.
everything compiled with no errors but for some reason I can't get the executable to run.
'./quarkbard' and './quarkbard -testnet' both return 'bash: ./quarkbard: No such file or directory' which is strange because the quarkbard program is 60M in size and clearly exists.
Hey guys,
I fucked up. I am terribly sorry for this. The only good thing about the current situation is that no attack is underway currently. This buys us some time. Unfortunately over the course of the next few days a lot of work is waiting for me and I do not want to fuckup again. So if in the meantime someone finds the time to look into it: please do go ahead. A possible fix might be to change the file src/version.h as such:
static const int PROTOCOL_VERSION = 70001;
static const int MIN_PROTO_VERSION = 209;
I cannot test it (@work currently). Can someone else step in please?
As mentioned earlier, I have a working wallet. I looked into the original quark wallet and it seems people were able to fix things by adding nodes via the debug console (under the help tab).
I used this to check to which nodes my wallet is succesfully connected using the command:
This showed I have successful connections to:
188.226.171.173:31616
205.234.139.125:31616
42.96.195.204:31616
95.182.106.43:31616
You can manually add these nodes by using this command (one at a time):
Like this:
I'm not sure, but maybe you don't need the ":31616" part
I hope this will help. Please tell us if it does.
I used this to check to which nodes my wallet is succesfully connected using the command:
Code:
getpeerinfo
This showed I have successful connections to:
188.226.171.173:31616
205.234.139.125:31616
42.96.195.204:31616
95.182.106.43:31616
You can manually add these nodes by using this command (one at a time):
Code:
addnode 188.226.171.173 add
addnode 205.234.139.125 add
addnode 42.96.195.204 add
addnode 95.182.106.43add
Like this:
I'm not sure, but maybe you don't need the ":31616" part
I hope this will help. Please tell us if it does.
Try this
This is an old thread! The new one can be found here
So i'm inable to connect to any nodes it seems, the wallet is just stuck on: "No block source available"
I've tried deleting everything but the wallet.dat and redownling the chain, it doesn't work,
I've tried adding a "quarkbar.conf" to the appdata folder and deleting the peers.dat to try and re-sync to an active node, that doesn't work
anyone have a suggestion?
I've tried deleting everything but the wallet.dat and redownling the chain, it doesn't work,
I've tried adding a "quarkbar.conf" to the appdata folder and deleting the peers.dat to try and re-sync to an active node, that doesn't work
anyone have a suggestion?
I just compiled the headless server using 'makefile-unix' in the 'src' folder,
everything compiled with no errors but for some reason I can't get the executable to run.
'./quarkbard' and './quarkbard -testnet' both return 'bash: ./quarkbard: No such file or directory' which is strange because the quarkbard program is 60M in size and clearly exists.
everything compiled with no errors but for some reason I can't get the executable to run.
'./quarkbard' and './quarkbard -testnet' both return 'bash: ./quarkbard: No such file or directory' which is strange because the quarkbard program is 60M in size and clearly exists.
We need some users to test this one. You can grab the sources @ https://github.com/QuarkBar/newQuarkBar.git
Please do not put it into production use yet, use the testnet instead.
Please do not put it into production use yet, use the testnet instead.
Can you explain to a noob like me, what you need me to do?
Try the following:
Start the client in testnet mode:
Code:
quarkbar-qt -testnet
Now start mining some coins. It should work. If you see errors then I fucked up.
I always just use the windows wallet
This is an old thread! The new one can be found here
We need some users to test this one. You can grab the sources @ https://github.com/QuarkBar/newQuarkBar.git
Please do not put it into production use yet, use the testnet instead.
Please do not put it into production use yet, use the testnet instead.
Can you explain to a noob like me, what you need me to do?
Try the following:
Start the client in testnet mode:
Code:
quarkbar-qt -testnet
Now start mining some coins. It should work. If you see errors then I fucked up.
We need some users to test this one. You can grab the sources @ https://github.com/QuarkBar/newQuarkBar.git
Please do not put it into production use yet, use the testnet instead.
Please do not put it into production use yet, use the testnet instead.
Can you explain to a noob like me, what you need me to do?
We need some users to test this one. You can grab the sources @ https://github.com/QuarkBar/newQuarkBar.git
Please do not put it into production use yet, use the testnet instead.
Please do not put it into production use yet, use the testnet instead.
Any word on getting the source code up? Once the KGW fix is done or changed it will be active again on cryptorush.
To help everyone get into this wonderfully coin in mintpal
https://www.mintpal.com/voting 19-24 24-29
https://www.mintpal.com/voting 19-24 24-29
+1
To help everyone get into this wonderfully coin in mintpal
https://www.mintpal.com/voting 19-24 24-29
https://www.mintpal.com/voting 19-24 24-29
I've contacted mintpal about getting QuarkBar on the voting list.
I assume it'll be on there soon.
I assume it'll be on there soon
.Quarkbar added to mintpal voting list now =)
https://www.mintpal.com/voting
Jump to: