Guys,
I'm having problems opening my wallet when trying to upgrade to the new 1.9.9 using my mac. Had no problem before, now it won't let me open it.
Error: Syndicate-Qt cannot be opened because of a problem. Can someone help me to fix this?
Topic: [ANN][SYNX] SYNDICATE Coin | Business Hub, Masternodes, PoS - page 19. (Read 56017 times)
I do get lot of of orphans as well. 
PLEASE UPDATE YOUR WALLET at 1.9.9v
That's what I'm using
I do get lot of of orphans as well.
PLEASE UPDATE YOUR WALLET at 1.9.9v
Hi,
I have latest 1.9.9 wallet version and I´m getting a lot of orphans too. Anyway after a month of staking I finally got two valid 5+ rewards, seems like rewards are not affected by orphans.
Regards,
I do get lot of of orphans as well.
PLEASE UPDATE YOUR WALLET at 1.9.9v
you need to manually remove the tx fee from the ammount you want to send!
anyone know what's wrong with 1.9.9 wallet.
I try to send out and it tells me insufficient funds. What's wrong with this wallet?
I try to send out and it tells me insufficient funds. What's wrong with this wallet?
I have no problems.
anyone know what's wrong with 1.9.9 wallet.
I try to send out and it tells me insufficient funds. What's wrong with this wallet?
I try to send out and it tells me insufficient funds. What's wrong with this wallet?
I do get lot of of orphans as well.
I am staking in new wallet for 5 days now, got only 5+5 orphan blocks so far every other day... 
Same here.I got 15 orphan blocks, never get a single mined coin since I bought SYNX 1 month ago. That´s not normal, there is something wrong with this coin.
I have the latest wallet 1.9.9. What else I could do?
?Are you staking or masternode?
You do get lot of orphan blocks with this coin it seems. I've had 5 or 6 blocks of orphans. I got paid 20 coins still from masternode yesterday. If you masternode you might want to restart the server and restart your wallet.
I'm just staking. I´ll try to buy more coins, anyway I feel that I'll get more orphans and nothing more....
Clarf
Any plans on getting SYNX on BlockNet? That would be amazing.
Send yourself 5000 coins again. Try again. It's obvious you didn't send exactly 5000 coins.
I cannot send myself 5000 coins again as it states that I have insufficient funds even though the 5000 show as available on my dashboard. In my coin control is shows my original amnt over 5000 as (change) and shows 2 masternode payouts but the 5000 actually in the masternode doesn't show up.
In transactions the payment to myself (masternode) is shown as the -0.0001 SYNX fee.
So if my vin cannot be allocated yet the masternode is somehow still paying out what is going on?
Maybe you are just staking your coins instead of masternode.
For me when I have my coins in masternode I can still send coins to whatever wallet. It's not locked where I can't send.
If you don't have masternode output that means your coins can't be in masternode.
If you're trying to resolve the Error: Could not allocate vin, you must first unlock your wallet and then try to start it. That error usually pops out if your wallet is currently locked. On the other hand, for STATUS: not in masternode list, I normally let it sync with the network for 2-5 mins and it will eventually update its status. Be patient about it.
My wallet has been unlocked and not encrypted. I have gotten STATUS: not in masternode list for about 18 hours now so it doesn't seem to be a sync issue.
See my previous answer to marvel directly above for other info.
How can I be getting masternode payouts without ever successfully starting the node and it claiming be be not in masternode list?
If there is a command to search for my specific IP in the masternode list I wont worry as i'm still getting mining payouts BUT what does worry me is that the 5000 coins in the masternode only show on my dashboard and not in my coin control.
Is that odd? or would they become available again after stopping masternode in my VPS commands?
And how can masternode payouts be blank in the debug console while the MN is literally paying out mining rewards?
I appreciate your answers here guys. I'm noob as fuck but this still doesn't make logic...
Send yourself 5000 coins again. Try again. It's obvious you didn't send exactly 5000 coins.
I cannot send myself 5000 coins again as it states that I have insufficient funds even though the 5000 show as available on my dashboard. In my coin control is shows my original amnt over 5000 as (change) and shows 2 masternode payouts but the 5000 actually in the masternode doesn't show up.
In transactions the payment to myself (masternode) is shown as the -0.0001 SYNX fee.
So if my vin cannot be allocated yet the masternode is somehow still paying out what is going on?
Did you send exactly 5000 coins? if you are sending from exchange you have to consider the fee. If within your wallet you don't have to worry about fee long as you have more than 5000 coins.
Get your transaction ID and and your masternode outputs. Make sure it's entered correctly in masternode.conf on your wallet. Wait 15 confirmations.
Use the new wallet. It's much better than the old where it crashed when entering transaction ID.
The masternode.conf file is correct but when i type masternode outputs in debug console it comes back blank.
The masternode has given me 2 rewards since yesterday but still has (STATUS: not in masternode list) and (Error: Could not allocate vin) when trying to start.
Shouldnt the 5000 coins of the masternode being showing in my coin control tab?
In what ways can I check with debug console, a web browser or putty that the node is actually enabled though the wallet may state otherwise?
If you're trying to resolve the Error: Could not allocate vin, you must first unlock your wallet and then try to start it. That error usually pops out if your wallet is currently locked. On the other hand, for STATUS: not in masternode list, I normally let it sync with the network for 2-5 mins and it will eventually update its status. Be patient about it.
Did you send exactly 5000 coins? if you are sending from exchange you have to consider the fee. If within your wallet you don't have to worry about fee long as you have more than 5000 coins.
Get your transaction ID and and your masternode outputs. Make sure it's entered correctly in masternode.conf on your wallet. Wait 15 confirmations.
Use the new wallet. It's much better than the old where it crashed when entering transaction ID.
The masternode.conf file is correct but when i type masternode outputs in debug console it comes back blank.
The masternode has given me 2 rewards since yesterday but still has (STATUS: not in masternode list) and (Error: Could not allocate vin) when trying to start.
Shouldnt the 5000 coins of the masternode being showing in my coin control tab?
In what ways can I check with debug console, a web browser or putty that the node is actually enabled though the wallet may state otherwise?
Send yourself 5000 coins again. Try again. It's obvious you didn't send exactly 5000 coins.
Did you send exactly 5000 coins? if you are sending from exchange you have to consider the fee. If within your wallet you don't have to worry about fee long as you have more than 5000 coins.
Get your transaction ID and and your masternode outputs. Make sure it's entered correctly in masternode.conf on your wallet. Wait 15 confirmations.
Use the new wallet. It's much better than the old where it crashed when entering transaction ID.
The masternode.conf file is correct but when i type masternode outputs in debug console it comes back blank.
The masternode has given me 2 rewards since yesterday but still has (STATUS: not in masternode list) and (Error: Could not allocate vin) when trying to start.
Shouldnt the 5000 coins of the masternode being showing in my coin control tab?
In what ways can I check with debug console, a web browser or putty that the node is actually enabled though the wallet may state otherwise?
I followed u3mur4's guide to set up my masternode but am running into an issue when starting the node.
I continually get Error: could not allocate vin. Everything is inputted correctly in the create node tab as well as both of my .conf files.
Any input on a solution?
Maybe pertinent, when looking in coin control features the 5000SYNX for my node does not show up but on my dashboard is stated they are available.
When creating the masternode I send the 5000SYNX to an internal wallet as I already had a couple staking rewards. This hasnt been an issue with any other masternodes I have set up.
I continually get Error: could not allocate vin. Everything is inputted correctly in the create node tab as well as both of my .conf files.
Any input on a solution?
Maybe pertinent, when looking in coin control features the 5000SYNX for my node does not show up but on my dashboard is stated they are available.
When creating the masternode I send the 5000SYNX to an internal wallet as I already had a couple staking rewards. This hasnt been an issue with any other masternodes I have set up.
Did you send exactly 5000 coins? if you are sending from exchange you have to consider the fee. If within your wallet you don't have to worry about fee long as you have more than 5000 coins.
Get your transaction ID and and your masternode outputs. Make sure it's entered correctly in masternode.conf on your wallet. Wait 15 confirmations.
Use the new wallet. It's much better than the old where it crashed when entering transaction ID.
I followed u3mur4's guide to set up my masternode but am running into an issue when starting the node.
I continually get Error: could not allocate vin. Everything is inputted correctly in the create node tab as well as both of my .conf files.
Any input on a solution?
Maybe pertinent, when looking in coin control features the 5000SYNX for my node does not show up but on my dashboard is stated they are available.
When creating the masternode I send the 5000SYNX to an internal wallet as I already had a couple staking rewards. This hasnt been an issue with any other masternodes I have set up.
I continually get Error: could not allocate vin. Everything is inputted correctly in the create node tab as well as both of my .conf files.
Any input on a solution?
Maybe pertinent, when looking in coin control features the 5000SYNX for my node does not show up but on my dashboard is stated they are available.
When creating the masternode I send the 5000SYNX to an internal wallet as I already had a couple staking rewards. This hasnt been an issue with any other masternodes I have set up.
I'm having a lot of conflicted payments. Almost 25% of the coins generated are conflicted. That's quite a lot.
I'm not staking. I'm on a masternode.
I'm not staking. I'm on a masternode.
Why would you delete your wallet file? That's where your coins are. I think you are fucked if you can't recover the file.
BECAUSE I'M AND IDIOT, MATE. The new QT wallet wouldn't run even when trying to start it from command prompt and editing the command path to include the folder.
ANYWAY, I restarted the VPS because the .cmd also wouldn't open my trading bot software and the SYNX QT wallet v1.9.9 is right there on my desktop. WTF. And upon inspection it holds the correct wallet address from my previous wallet. DOUBLE WTF.
So, I guess I didn't lose my tokens but I'm still at a loss for how that all happened...
lol.. Let it sync man.
Jump to: