[ANN][TES] ϟ The Tesla ϟ Decentralize the Energy System ϟ TeslaStarter - page 64.

2bfree

sr. member

Activity: 686

Merit: 251

I'm investigating Crypto Projects

Quote from: Rw13enlib88 on April 18, 2017, 04:34:27 PM

Quote from: 2bfree on April 18, 2017, 04:01:53 PM

Quote from: Haunebu81 on April 18, 2017, 03:52:15 PM

Finally after over a week I'm all sync'd up. But I can't stake for some reason. I'm getting the error "No suitable inputs were found". What does that mean? I have about 500k TES in my wallet.

Wow I didn't realize it takes a week. I'm on the road traveling my internet is bad, plus I'm not in the same place, might have to deal with this when I get back to Europe.

If you must be opening and closing the wallet because you're traveling is better if you wait until you can leave it open or we have a bootstrap

I think I'll wait for a few more months and check on it, now that I know that all I need is the Wallet.dat file. Hopefully by then you guys get the TeslaCoin economy going (Good luck).

Rw13enlib88

legendary

Activity: 2142

Merit: 1025

Quote from: 2bfree on April 18, 2017, 04:01:53 PM

Quote from: Haunebu81 on April 18, 2017, 03:52:15 PM

Finally after over a week I'm all sync'd up. But I can't stake for some reason. I'm getting the error "No suitable inputs were found". What does that mean? I have about 500k TES in my wallet.

Wow I didn't realize it takes a week. I'm on the road traveling my internet is bad, plus I'm not in the same place, might have to deal with this when I get back to Europe.

If you must be opening and closing the wallet because you're traveling is better if you wait until you can leave it open or we have a bootstrap

Rw13enlib88

legendary

Activity: 2142

Merit: 1025

Quote from: Haunebu81 on April 18, 2017, 03:52:15 PM

Finally after over a week I'm all sync'd up. But I can't stake for some reason. I'm getting the error "No suitable inputs were found". What does that mean? I have about 500k TES in my wallet.

First, for everyone and not specially for you

you guys have your wallet encrypted right?

You dont want anyone moving your coins to other wallet without permission

Second, thanks for being so patient

Did you have your wallet 24h syncronized? Because min age is 24h

Quote

Min age: 24 hours

Max age: 90 days

2bfree

sr. member

Activity: 686

Merit: 251

I'm investigating Crypto Projects

Quote from: Haunebu81 on April 18, 2017, 03:52:15 PM

Finally after over a week I'm all sync'd up. But I can't stake for some reason. I'm getting the error "No suitable inputs were found". What does that mean? I have about 500k TES in my wallet.

Wow I didn't realize it takes a week. I'm on the road traveling my internet is bad, plus I'm not in the same place, might have to deal with this when I get back to Europe.

Haunebu81

hero member

Activity: 525

Merit: 500

Finally after over a week I'm all sync'd up. But I can't stake for some reason. I'm getting the error "No suitable inputs were found". What does that mean? I have about 500k TES in my wallet.

Rw13enlib88

legendary

Activity: 2142

Merit: 1025

Quote from: 2bfree on April 18, 2017, 02:20:26 PM

Thanks for the reply however I failed Sad

My question is probably stupid but where do you add those nodes? I looked all over the TeslaCoin QT and there is no place to enter it.

Then I googled adding nodes to bitcoin qt and ran into this Youtube video:

https://www.youtube.com/watch?v=Ip7SCD0nWgA

and she said to make a Coinname.conf file where the wallet.dat is which is what I did and made:

Teslacoin.conf and in that conf file put the nodes but still same problem like yesterday.

Am I missing something obvious?

Thanks.

You've done it right

Create teslacoin.conf and save it in the same Teslacoin folder

Close the wallet and open it again. And wait...

It will take some time

Let us know if it's working. We're working on a bootstrap but is taking more than expected, hope it will be ready soon

Quote

Conf.Info

server=1
listen=1
daemon=1
rpcport=1857
port=1856
rpcallowip=127.0.0.1
rpcconnect=127.0.0.1
rpcallowip=localhost
rpcconnect=localhost
rpcuser=**user**
rpcpassword=**password**
addnode=67.71.49.191:1856
addnode=188.134.72.213:64571
addnode=188.134.72.213:1856
addnode=104.28.21.109:1856
addnode=194.135.84.136:1856
addnode=24.98.149.31:1856
addnode=24.98.149.31:58041
addnode=188.246.71.198:1856
addnode=89.143.80.234:1856
addnode=162.255.117.105:63927
addnode=193.198.102.16:36182
addnode=82.176.15.155:46850
addnode=193.198.102.16:1856
addnode=82.176.15.155:1856

2bfree

sr. member

Activity: 686

Merit: 251

I'm investigating Crypto Projects

Thanks for the reply however I failed Sad

My question is probably stupid but where do you add those nodes? I looked all over the TeslaCoin QT and there is no place to enter it.

Then I googled adding nodes to bitcoin qt and ran into this Youtube video:

https://www.youtube.com/watch?v=Ip7SCD0nWgA

and she said to make a Coinname.conf file where the wallet.dat is which is what I did and made:

Teslacoin.conf and in that conf file put the nodes but still same problem like yesterday.

Am I missing something obvious?

Thanks.

Rw13enlib88

legendary

Activity: 2142

Merit: 1025

Quote from: 2bfree on April 17, 2017, 12:46:54 PM

Quote from: 2bfree on April 17, 2017, 12:04:55 PM

I have some Teslacoin from years ago in a file it was a Mac wallet and I have a .dat file and was looking at your instructions and I'm not very technical when I bought the first time was just to keep it so I just downloaded the walled on my mac and bought some on the exchange using BTC and sent to the wallet then I thought the project died.

So what do I do now? Thanks.

I installed the new new windows wallet on my mac (using Parallels windows emulator) then I found the Wallet.dat file in appsometing/roaming directory (not sure I did a search) and put the old wallet and it shows my old coins.

So I think that works now right?

Next question is the new wallet is out of sinc and I show a red icon on the connection and it says "0 active connections".

And for my coins it says unconfirmed.

OK, that's it. Any help would be appreciated.

PS: I'm glad you guys got this project back up and running, I'm a big fan of Nikola Tesla.

Great you have recover them! and welcome back!

add this nodes

addnode=172.114.38.19
addnode=184.69.47.154
addnode=184.90.42.110
addnode=192.222.191.119
addnode=50.72.14.50
addnode=66.255.208.25
addnode=73.207.9.243
addnode=13.93.212.31
addnode=136.243.40.220
addnode=184.164.129.202
addnode=188.134.72.213
addnode=62.108.37.133
addnode=72.241.235.204
addnode=84.2.34.93

2bfree

sr. member

Activity: 686

Merit: 251

I'm investigating Crypto Projects

Quote from: 2bfree on April 17, 2017, 12:04:55 PM

I have some Teslacoin from years ago in a file it was a Mac wallet and I have a .dat file and was looking at your instructions and I'm not very technical when I bought the first time was just to keep it so I just downloaded the walled on my mac and bought some on the exchange using BTC and sent to the wallet then I thought the project died.

So what do I do now? Thanks.

I installed the new new windows wallet on my mac (using Parallels windows emulator) then I found the Wallet.dat file in appsometing/roaming directory (not sure I did a search) and put the old wallet and it shows my old coins.

So I think that works now right?

Next question is the new wallet is out of sinc and I show a red icon on the connection and it says "0 active connections".

And for my coins it says unconfirmed.

OK, that's it. Any help would be appreciated.

PS: I'm glad you guys got this project back up and running, I'm a big fan of Nikola Tesla.

2bfree

sr. member

Activity: 686

Merit: 251

I'm investigating Crypto Projects

I have some tesla coin from years ago in a file it was a Mac wallet and I have a .dat file and was looking at your instructions and I'm not very technical when I bought the first time was just to keep it so I just downloaded the walled on my mac and bought some on the exchange using BTC and sent to the wallet then I thought the project died.

So what do I do now? Thanks.

tiredofscams

full member

Activity: 223

Merit: 101

Quote from: logictense on April 13, 2017, 08:43:15 AM

Quote from: valkir on April 11, 2017, 07:42:39 PM

Quote from: Haunebu81 on April 11, 2017, 12:42:34 PM

Thanks guys. Tx finally went through. Could have been an issue with Bittrex.

Now I have another problem. Both my QT's on separate rigs and on separate networks are stuck on block 1188176.

Is there a bootstrap or something I can use?

Im stuck at the same block Huh

Its halted Nobody wants to point even a shred of kilohash to it. Dont worry some massive hash will arrive once teslas deal with general motors is confirmed. Tesla will be the second TRUMP, just give it another year or ten years or whatever to gain strength and velocity. No doubt in ten to twenty years TES will be trading on parity with eth.

Not sure what you ate, but you should stop it immediately, because it's making you delusional.
Nobody mentioned GM ever, but there are plans to get into an agreement with TeslaMotors and when that happens, things will only just start. Rome wasn't build in a day, so be patient, and please stop fudding. If you want to help in any way, you are always more than welcome.

Network has 19 known peers and is running smoothly on the explorer. There just seems to be some issue when synching from scratch, therefore we need a completely new bootstrap.

Any of you who are able to stake, could you PM me or Rw?

tiredofscams

full member

Activity: 223

Merit: 101

Quote from: Griffith on April 14, 2017, 01:42:44 PM

Quote from: Rw13enlib88 on April 14, 2017, 05:39:07 AM

Sorry for the lack of communication, working on uploading the bootstrap
hope it will be ready for today

i was trying to make one as well. network keeps getting stuck syncing.

Thank you for updating, Griffith. I hope you will manage to make a bootstrap soon.

valkir

legendary

Activity: 1484

Merit: 1004

Quote from: Griffith on April 14, 2017, 01:51:30 PM

Quote from: valkir on April 11, 2017, 07:42:39 PM

Quote from: Haunebu81 on April 11, 2017, 12:42:34 PM

Thanks guys. Tx finally went through. Could have been an issue with Bittrex.

Now I have another problem. Both my QT's on separate rigs and on separate networks are stuck on block 1188176.

Is there a bootstrap or something I can use?

Im stuck at the same block Huh

edit: it seems both of you are forked

If you could do a bootstrap, this would be appreciated. Thanks

Rw13enlib88

legendary

Activity: 2142

Merit: 1025

Quote from: arnonazik on April 16, 2017, 10:45:58 AM

"0 active connection(s) to teslacoin network"
(Windows)

What to do?

use this nodes

addnode=172.114.38.19
addnode=184.69.47.154
addnode=184.90.42.110
addnode=192.222.191.119
addnode=50.72.14.50
addnode=66.255.208.25
addnode=73.207.9.243
addnode=13.93.212.31
addnode=136.243.40.220
addnode=184.164.129.202
addnode=188.134.72.213
addnode=62.108.37.133
addnode=72.241.235.204
addnode=84.2.34.93

arnonazik

newbie

Activity: 1

Merit: 0

"0 active connection(s) to teslacoin network"
(Windows)

What to do?

Griffith

legendary

Activity: 1400

Merit: 1000

Quote from: valkir on April 11, 2017, 07:42:39 PM

Quote from: Haunebu81 on April 11, 2017, 12:42:34 PM

Thanks guys. Tx finally went through. Could have been an issue with Bittrex.

Now I have another problem. Both my QT's on separate rigs and on separate networks are stuck on block 1188176.

Is there a bootstrap or something I can use?

Im stuck at the same block Huh

edit: it seems both of you are forked

Griffith

legendary

Activity: 1400

Merit: 1000

Quote from: Rw13enlib88 on April 14, 2017, 05:39:07 AM

Sorry for the lack of communication, working on uploading the bootstrap
hope it will be ready for today

i was trying to make one as well. network keeps getting stuck syncing.

Rw13enlib88

legendary

Activity: 2142

Merit: 1025

Sorry for the lack of communication, working on uploading the bootstrap
hope it will be ready for today

logictense

hero member

Activity: 2147

Merit: 518

Quote from: valkir on April 11, 2017, 07:42:39 PM

Quote from: Haunebu81 on April 11, 2017, 12:42:34 PM

Thanks guys. Tx finally went through. Could have been an issue with Bittrex.

Now I have another problem. Both my QT's on separate rigs and on separate networks are stuck on block 1188176.

Is there a bootstrap or something I can use?

Im stuck at the same block Huh

Its halted Nobody wants to point even a shred of kilohash to it. Dont worry some massive hash will arrive once teslas deal with general motors is confirmed. Tesla will be the second TRUMP, just give it another year or ten years or whatever to gain strength and velocity. No doubt in ten to twenty years TES will be trading on parity with eth.

valkir

legendary

Activity: 1484

Merit: 1004

Nope

Topic: [ANN][TES] ϟ The Tesla ϟ Decentralize the Energy System ϟ TeslaStarter - page 64. (Read 84571 times)